Kidde Argonite Fire Suppression System Spares

Code: Argonite
  • Safe to use in areas with equipment
  • Extinguish fires within one minute
  • Clean

In Stock
Make An Enquiry

The Kidde Argonite Fire Suppression System releases inert gas through cylinder and valves to extinguish a fire by flooding an area, reducing the oxygen content.  Developed by Ginge-Kerr, to supersede Halon, with no global warming or ozone depletion potential.  Clean up is minimal as no byproducts, residue or toxicological effects are produced when exposed to fire. Argonite is a mix of Argon and Nitrogen gas 50/50, similar to air density.

Suited to leaky enclosures applications include offshore oil & gas, laboratories, flight simulators, substations, and control rooms where water, foam or powder are not be permitted.

Stored as a gas within the cylinder assembly, when discharged fires are extinguished in under a minute reducing normal oxygen content from around 21% to 12.5%. High enough for safety personnel to operate for short periods, with no effect on visibility, the agent is also colourless and odourless.

System properties

  • Actuation by a solenoid or manual actuator
  • Durable steel cylinders
  • Systems are connected by a common manifold, with at least one cylinder, typically pressured at 300 bar
  • Corrosion-resistant brass discharge valves designed work for reduced pipe sizes for optimum performance
  • Cylinders can be installed up to 100 metres away from an area
  • Low install costs
  • Minimal space needed if 300 bar system used instead of 200 bar

Approvals

  • FM Approved
  • ULC Listed

Enquire About This Product

Title Size
K-38-1000_screen 672 KB
Kidde Argonite 888 KB
K-85-3005_print_AA 233 KB
K-85-3007_print_AA 438 KB
DS 01-1322-5900_7500 ISS-2 109 KB
DS 01-3388-0001 ISS-1 108 KB
DS 01-3388-0000 ISS-5 99 KB
DS 01-7172-1150_1300 ISS-7 185 KB
DS 01-7171-1150_1300 ISS-6 272 KB

Additional information

Weight0.09 kg

Ordering Information

INERTS 469 Series

STANDARD ARGONITE & common components

Cylinders

6-01-1311-5900 CYLINDER, Ar/N2. 67,5L 150 BAR
6-01-1312-5900 CYLINDER, Ar/N2. 67,5L 200 BAR
6-01-1314-5900 CYLINDER, Ar/N2. 67,5L 300 BAR
6-01-1321-5900 CYLINDER, Ar/N2, 80L 150 BAR
6-01-1322-5900 CYLINDER, Ar/N2, 80L 200 BAR
6-01-1324-5900 CYLINDER, Ar/N2, 80L 300 BAR
6-01-1392-5900 CYLINDER, Ar/N2 140L 200 BAR
6-01-1394-5900 CYLINDER, Ar/N2 140L 300 BAR
6-01-1332-5900 CYLINDER, Ar/N2. 15,9L 200 BAR
6-01-1334-5900 CYLINDER, Ar/N2. 15,9L 300 BAR
6-01-1322-5904 80L ARGON CYL ASSY 200BAR
6-01-1324-5904 80L ARGON CYL ASSY 300BAR
6-01-1394-5904 140L ARGON CYL ASSY 300BAR
6-01-1322-5905 80L IG-541 CYL ASSY 200 BAR
6-01-1324-5905 80L IG-541 CYL ASSY 300BAR
6-01-1394-5905 140L IG-541 CYL ASSY 300BAR
6-01-1322-5906 80L NITROGEN CYL ASSY 200 BAR
6-01-1324-5902 80L NITROGEN CYL ASSY 300 BAR
6-01-1394-5902 140L NITROGEN CYL ASSY 300 BAR

Warnings signs & labels

6-01-2135-0200 SERVICE LABEL ARGON 200BAR GB
6-01-2135-0300 SERVICE LABEL ARGON 300BAR GB
6-01-2136-0200 SERVICE LABEL IG-541 200BAR GB
6-01-2136-0300 SERVICE LABEL IG-541 300BAR GB
6-01-2130-0220 SERVICE LABEL NITROGEN 200 BAR GB
6-01-2130-0230 SERVICE LABEL NITROGEN 300 BAR GB
6-01-2132-0200 ARGONITE CYLINDER LABEL 150 bar
6-01-2133-0200 ARGONITE CYLINDER LABEL 200 bar
6-01-2134-0200 ARGONITE CYLINDER LABEL 300 bar
6-01-2172-0200 WARNING SIGN GB, VENT FOR ARGONITE
6-K4076-2 INERT GAS WARNING SIGN – ROOM
6-01-2178-0200 MANUAL RELEASE UNIT SIGN
6-K4076-1 INERT GAS SIGN – MANUAL CONTROL POINT
6-01-2200-0002 WARNING SIGN FOR STORAGE ROOM GB
6-01-2233-0200 WARNING SIGN, NO ENTRANCE, GB
6-01-2177-0200 SIGN FOR PILOT MANIFOLD

Hoses 67.5 / 80L

6-01-3272-1120 PILOT HOSE 1/4″ X 270MM + O-RING
6-01-3272-1200 PILOT HOSE 1/4″ X 500MM + O-RING
6-01-3284-0100 DISCHARGE HOSE 1/2″ X 400MM DNV 67.5/80L

Other Hoses & leak valves

6-01-3272-1140 PILOT HOSE 1/4″ X 300MM + O-RING
6-01-3272-1180 PILOT HOSE 1/4″ X 450MM O-RING 100mm BR
6-01-3272-1300 PILOT HOSE 1/4″ X 700MM + O-RING
6-01-3273-1100 PILOT HOSE 1/4″x300mmx90 O-RING 100MM BR
6-01-3273-1140 PILOT HOSE 1/4″x400mmx90 O-RING 100MM BR
6-01-3273-1150 PILOT HOSE 1/4″x450mmx90 O-RING 100MM BR
6-01-3273-1200 PILOT HOSE 1/4″x700mmx90 O-RING 100MM BR
6-01-3284-0200 DISCHARGE HOSE 1/2″ X 700MM DNV
6-01-3388-0000 LEAK VALVE FOR PILOT LINE 1/4″ BSP. FE

Hoses 140L

6-01-3272-1160 PILOT HOSE 1/4″ x 365mm O-RING 140L CYL
6-01-3272-1250 PILOT HOSE 1/4″ x 600mm O-RING 140L CYL
6-01-3284-0150 DISCHARGE HOSE 1/2″ X 450MM DNV 140L

Discharge Nozzles – orifices

6-01-3461-2— NOZZLE ORIFICE 1/2″ ø3.0 mm to 10.0mm
6-01-3461-3— NOZZLE ORIFICE 3/4″ ø7.0 mm to 14.0mm
6-01-3461-41– NOZZLE ORIFICE 1″ ø10.0 mm to 18.0mm
6-01-3461-5— NOZZLE ORIFICE 1 1/2″ ø15.0 mm to 26.0mm

Discharge Nozzles – Complete assemblies BSP

6-01-3465-12— NOZZLE ASSEMBLY 1/2″ BSP ø3.0 mm to 10.0mm
6-01-3465-13— NOZZLE ASSEMBLY 3/4″ BSP ø7,0 mm to 14.0mm
6-01-3465-141– NOZZLE ASSEMBLY 1″ BSP ø10.0 mm to 18.0mm
6-01-3465-15— NOZZLE ASSEMBLY 1 1/2″ BSP ø15.0 mm to 26.0mm

Discharge Nozzles Body – BSP

6-01-3465-1201 NOZZLE BODY 1/2″ BSP
6-01-3465-1301 NOZZLE BODY 3/4″ BSP
6-01-3465-1401 NOZZLE BODY 1″ BSP
6-01-3465-1501 NOZZLE BODY 11/2″ BSP

Discharge Nozzles – Complete assemblies NPT

6-01-3465-22— NOZZLE ASSEMBLY 1/2″ NPT ø3.0 mm to 10.0mm
6-01-3465-23— NOZZLE ASSEMBLY 3/4″ NPT ø7,0 mm to 14.0mm
6-01-3465-241– NOZZLE ASSEMBLY 1″ NPT ø10.0 mm to 18.0mm
6-01-3465-25— NOZZLE ASSEMBLY 1 1/2″ NPT ø15.0 mm to 26.0mm

NOTE: — denotes drill size, specify when ordering

Discharge Nozzles Body – NPT

6-01-3465-2201 NOZZLE BODY 1/2″ NPT
6-01-3465-2301 NOZZLE BODY 3/4″ NPT
6-01-3465-2401 NOZZLE BODY 1″ NPT
6-01-3465-2501 NOZZLE BODY 11/2″ NPT

Manifolds – 300 / 200 Bar 80L CENTRE OUTLET (Price on Application for End Outlet)

6-01-3506-3111 MANIFOLD, 2 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3112 MANIFOLD, 3 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3113 MANIFOLD, 4 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3114 MANIFOLD, 5 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3115 MANIFOLD, 6 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3116 MANIFOLD, 7 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3117 MANIFOLD, 8 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3118 MANIFOLD, 9 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3119 MANIFOLD, 10 CYL. 1 ROW, BSP, 300 bar
6-01-3506-3121 MANIFOLD, 4 CYL, 2 ROWS, BSP, 300 bar
6-01-3506-3122 MANIFOLD, 6 CYL, 2 ROWS, BSP, 300 bar
6-01-3506-3123 MANIFOLD, 8 CYL, 2 ROWS, BSP, 300 bar
6-01-3506-3124 MANIFOLD, 10 CYL, 2 ROWS, BSP, 300 bar.
6-01-3506-3125 MANIFOLD, 12 CYL, 2 ROWS, BSP, 300 bar.
6-01-3506-3126 MANIFOLD, 14 CYL, 2 ROWS, BSP, 300 bar.
6-01-3506-3127 MANIFOLD, 16 CYL, 2 ROWS, BSP, 300 bar.
6-01-3506-3128 MANIFOLD, 18 CYL, 2 ROWS, BSP, 300 bar.
6-01-3506-3129 MANIFOLD, 20 CYL, 2 ROWS, BSP, 300 bar.
6-01-3711-3000 ADAPTOR 1″ BSPT TO 1″ NPT OUTLET
6-01-3711-4000 ADAPTOR 1.5″ BSPT TO 1.5″ NPT OUTLET
6-01-3711-5000 ADAPTOR 2″ BSPT TO 2″ NPT OUTLET

Pilot manifolds

6-01-3508-0001 PILOT MANIFOLD FOR 1 DIVERTER VALVES
6-01-3508-0002 PILOT MANIFOLD FOR 2 DIVERTER VALVES
6-01-3508-0003 PILOT MANIFOLD FOR 3 DIVERTER VALVES
6-01-3508-0004 PILOT MANIFOLD FOR 4 DIVERTER VALVES
6-01-3508-0005 PILOT MANIFOLD FOR 5 DIVERTER VALVES

Restrictors 80L

6-01-3700-1— 1/2 ” RESTRICTOR ORIFICE ø3.0mm to 7.0mm
6-01-3700-3— 1″ RESTRICTOR ORIFICE ø5.0mm to18.0mm
6-01-3700-4— 11/2 ” RESTRICTOR ORIFICE ø3.0mm to 27.0mm
6-01-3700-5— 2 ” RESTRICTOR ORIFICE ø5.6mm to 36.0mm
6-01-3701-3001 Rest Body Diverter Valve 1″ NPT/NPT MA/FE
6-01-3701-4001 Rest Body Diverter Valve 1-1/2″ NPT/NPT MA/FE
6-01-3701-5001 Rest Body Diverter Valve 2″ NPT/NPT MA/FE
6-01-3702-3001 BODY FOR 1″ NPT/NPT FE/FE RESTRICTOR
6-01-3702-4001 BODY FOR 1-1/2″ NPT/NPT FE/FE RESTRICTOR
6-01-3702-5001 BODY FOR 2″ NPT/NPT FE/FE RESTRICTOR
6-01-3703-1001 Rest Body Diverter Valve 1/2″ NPT/BSP MA/FE
6-01-3703-3001 Rest Body Diverter Valve 1″ NPT/BSP MA/FE
6-01-3703-4001 Rest Body Diverter Valve 1-1/2″ NPT/BSP MA/FE
6-01-3703-5001 Rest Body Diverter Valve 2″ NPT/BSP MA/FE
6-01-3704-3001 BODY FOR 1″ NPT/BSP FE/FE RESTRICTOR
6-01-3704-4001 BODY FOR 1-1/2″ NPT/BSP FE/FE RESTRICTOR
6-01-3704-5001 BODY FOR 2″ NPT/BSP FE/FE RESTRICTOR
6-01-3705-1001 BODY FOR 1/2″ BSP/NPT MA/FE RESTRICTOR
6-01-3706-1001 BODY FOR 1/2″ BSP/BSP MA/FE RESTRICTOR
6-01-3710-1000 ADAPTOR 1/2″ NPT M x 1/2″ BSP F OUT
6-01-3710-3000 ADAPTOR 1″ NPT M x 1″ BSP F OUT
6-01-3710-4000 ADAPTOR 1.5″ NPT M x 1.5″ BSP F OUT
6-01-3710-5000 ADAPTOR 2″ NPT M x 2″ BSP F OUT

Valves

6-01-6240-1000 BALL VALVE, ½”, ACTUATOR, FE-NPT
6-01-6240-1001 HANDLE, ½” BALL VALVE, 01-6240-0000
6-01-6242-1000 BALL VALVE, 1″, ACTUATOR, FE-NPT
6-01-6242-1001 HANDLE, 1″ 1 1/2″ & 2″ BALL VALVE, 01-6242-0000
6-01-6244-1000 BALL VALVE, 1 ½, ACTUATOR, FE-NPT
6-01-6246-1000 BALL VALVE, 2″ W. ACTUATOR, FE-NPT
6-01-6363-0000 Pilot Line NRV 1/4″ W. CU WASHER
6-01-6477-0000 FILLING ADAPTOR, FOR VALVE 01-6471-0–0
6-01-6477-0100 FILLING ADAPTOR, FOR VALVE 01-6471-0–0

Pressure indicators & relief devices

6-01-6653-0001 PRESSURE RELIEF DEVICE 150 bar, BSP
6-01-6653-0002 PRESSURE RELIEF DEVICE 200 bar, BSP
6-01-6653-0003 PRESSURE RELIEF DEVICE 300 bar, BSP
6-01-6653-0101 PRESSURE RELIEF DEVICE 150 bar, NPT
6-01-6653-0102 PRESSURE RELIEF DEVICE 200 bar, NPT
6-01-6653-0103 PRESSURE RELIEF DEVICE 300 bar, NPT
6-01-7171-1150 CONTACT GAUGE UNIT, 150 BAR, N.C.
6-01-7171-1200 CONTACT GAUGE UNIT, 200 BAR, N.C.
6-01-7171-1300 CONTACT GAUGE UNIT, 300 BAR, N.C.
6-01-7172-1150 RELEASE UNIT 150 BAR, N.C.
6-01-7172-1200 RELEASE UNIT 200 BAR, N.C.
6-01-7172-1300 RELEASE UNIT 300 BAR, N.C.
6-01-7172-1209 RELEASE UNIT ATEX (EExd 11C T6) GAUGE NC 200BAR (Non EU)
6-01-7172-1309 RELEASE UNIT ATEX (EExd 11C T6) GAUGE NC 300BAR (Non EU)
6-01-7172-7319 RELEASE UNIT ATEX (EExd) NC/NO 300BAR P/S ST.ST. (Non EU)
6-01-7172-7219 RELEASE UNIT ATEX (EExd) NC/NO 200BAR P/S ST.ST. (Non EU)
6-01-7171-7319 GAUGE UNIT ATEX (EExd) NC/NO 300BAR P/S ST.ST. (Non EU)
6-01-7171-7219 GAUGE UNIT ATEX (EExd) NC/NO 200BAR P/S ST.ST. (Non EU)
6-01-7221-0300 GAUGE 1/2″ NPT, 0-400 bar x 100kpa.
6-K4135 ODORISER

Fixation components 80L

6-01-8121-1000 UNI STRUT WALL BRACKET, 1 CYLINDER, L = 400mm
6-01-8122-1000 UNI STRUT WALL BRACKET, 2 CYLINDERS, L = 650mm
6-01-8123-1000 UNI STRUT WALL BRACKET, 3 CYLINDERS, L = 950mm
6-01-8124-1000 UNI STRUT WALL BRACKET, 4 CYLINDERS, L = 1250mm
6-01-8125-1000 UNI STRUT WALL BRACKET, 5 CYLINDERS, L = 1550mm
6-01-8126-1000 UNI STRUT WALL BRACKET, 6 CYLINDERS, L = 1850mm
6-01-8131-0000 CLAMP FOR CYLINDER ø267 mm. SET
6-01-8131-0002 ENDCOVER, WHITE PVC 34 x 40 mm
6-01-8141-0000 PIPE CLAMP ø31.8 – ø35.9 mm
6-01-8142-0000 PIPE CLAMP ø46.8 – ø50.8 mm
6-01-8143-0000 PIPE CLAMP ø58.7 – ø63.5 mm
6-01-8145-0000 PIPE CLAMP ø88.1 – ø95.2 mm
6-01-8160-0150 BRACKET FOR HOSE (150 mm)
6-01-8160-0200 BRACKET FOR MANIFOLD 1 ROW (200 mm)
6-01-8160-0520 BRACKET FOR MANIFOLD 2 ROWS (520 mm)
6-01-8160-0830 BRACKET FOR MANIFOLD 3 ROWS (830 mm)
6-01-8337-0100 CLAMPING BOLT, 1 ROW, L = 410mm
6-01-8337-0200 CLAMPING BOLT, FOR 2 ROWS, L = 715 mm
6-01-8337-0300 CLAMPING BOLT, FOR 3 ROWS, L = 1030 m
6-01-8660-0000 1/2″ BSP END CAP FOR CHECK VALVE
6-03-8162-0000 WOODEN SPACER 1 x 2, 45/67L CYLINDERS
6-03-8163-0000 WOODEN SPACER 1 x 3, 45/67L CYLINDERS
6-03-8164-0000 WOODEN SPACER 2 x 2, 45/67L CYLINDERS
6-03-8165-0000 WOODEN SPACER 2 x 3, 45/67L CYLINDERS
6-03-8266-0000 CLAMPING BAR, 2 x 1. 45/67L CYLINDERS
6-03-8267-0000 CLAMPING BAR, 3 x 1, 45/67L CYLINDERS
6-03-8331-0000 DISTANCE PIPE 3/4″ W/WASHERS

Fixation components 140L

6-01-8121-1400 UNISTRUT CYL WALL BRACKET, 1 CYL – 440MM
6-01-8123-1000 UNISTRUT CYL WALL BRACKET, 2 CYL – 950MM
6-01-8125-1000 UNISTRUT CYL WALL BRACKET, 3 CYL – 1550MM
6-01-8131-1000 SINGLE CLAMP 140L CYL GALVANIZED STEEL
6-01-8160-0250 BRACKET FOR MANIFOLD 1 ROW 250MM
6-01-8160-0600 BRACKET FOR MANIFOLD 2 ROW 600MM
6-01-8160-1000 BRACKET FOR MANIFOLD 3ROW 1000MM
6-01-8437-0100 CLAMPING BOLT 1 ROW 500MM ST.ST. – 140L
6-01-8437-0200 CLAMPING BOLT 2 ROW 895MM ST.ST. – 140L
6-01-8437-0300 CLAMPING BOLT 3 ROW 1300MM ST.ST. – 140L
6-03-8331-0140 DISTANCE PIPE 3/4″ + WASHERS 140L
6-03-8366-0000 CLAMPING BAR 1×2 FOR 140L CYL
6-03-8367-0000 CLAMPING BAR 1x3FOR 140L CYL
6-03-8368-0000 CLAMPING BAR 1×1 FOR 140L CYL
6-03-8461-0000 WOODEN SPACER 1×1 140L CYL
6-03-8462-0000 WOODEN SPACER 1×2 140L CYL
6-03-8463-0000 WOODEN SPACER 1×3 140L CYL
6-03-8464-0000 WOODEN SPACER 2×2 140L CYL
6-03-8465-0000 WOODEN SPACER 2×3 140L CYL

Specialties & tools

6-01-4130-0000 1/4″ CROSS FOR ACTUATION LINE, STEEL
6-01-4131-0000 TEE PIECE FOR ACTUATING LINE/VALVE
6-01-9600-0200 TORQUE KEY SET
6-03-5713-0000 PRESSURE OPERATED SWITCH
6-K4213 Copper bundy tube for pressure switch
6-03-3641-0000 Union 1/4″ BSPT x 8mm OD Copper Tube
6-15-0075-0013 SEEGER-RING 15×1.00 DIN 472
6-15-0075-0014 SEEGER-RING 20×1.00 DIN 472
6-15-0075-0015 SEEGER-RING 25×1.20 DIN 472
6-15-0075-0016 SEEGER-RING 36×1.50 DIN 472
6-15-0181-0300 O-RING 17,17 x 1,78, SHORE 80, EPDM
6-15-8667-0615 MALE ADAPTER UNION ø6 x 1/4″ 60°
6-15-8685-0651 1/4″ TEE PIECE FOR ACTUATING LINE

INERTS 400 Series

Cylinders

38-418021-055 80L 200 Bar IG55 Cylinder-Valve Assembly
38-418031-055 80L 300 Bar IG55 Cylinder-Valve Assembly
38-411431-055 140L 300 Bar IG55 Cylinder-Valve Assembly
38-418021-001 80L 200 Bar Argon IG01 Cylinder-Valve Assembly
38-418031-001 80L 300 Bar Argon IG01 Cylinder-Valve Assembly
38-411431-001 140L 300 Bar Argon IG01 Cylinder-Valve Assembly
38-418021-541 80L 200 Bar IG541 Cylinder-Valve Assembly
38-418031-541 80L 300 Bar IG541 Cylinder-Valve Assembly
38-411431-541 140L 300 Bar IG541 Cylinder-Valve Assembly
38-418021-100 80L 200 Bar Nitrogen IG100 Cylinder-Valve Assembly
38-418031-100 80L 300 Bar Nitrogen IG100 Cylinder-Valve Assembly
38-411431-100 140L 300 Bar Nitrogen IG100 Cylinder-Valve Assembly

HOSES AND BLEED VALVE

38-400330-410 Discharge Hose, 3/4″, 90° x 90° 410 mm long (80L)
38-400330-510 Discharge Hose, 3/4″, 90° x 90° 510 mm long (140L)
38-401110-500 Actuation/Release Unit Hose with Quick connect Couplings 500mm (80L)
38-401110-600 Actuation Hose with Quick connect Couplings 600mm (140L)
38-401130-600 Actuation Hose with Quick connect Couplings 600mm 1 x 90Deg (80L)
38-401130-700 Actuation Hose with Quick connect Couplings 700mm 1 x 90Deg (140L)
38-400007-001 Pilot Line Bleed Valve
6-01-3273-1200 Back-plate manifold to Selector Valve Hose – 1/4″ x 90° x 700mm

RELEASE UNITS AND PRESSURE GAUGES & CABLES

38-400001-002 Release Unit 400 Series Valve c/w Solenoid – 200 Bar (NC)
38-400001-001 Release Unit 400 Series Valve c/w Solenoid – 200 Bar (NO)
38-400001-004 Release Unit 400 Series Valve c/w Solenoid – 300 Bar (NC)
38-400001-003 Release Unit 400 Series Valve c/w Solenoid – 300 Bar (NO)
38-400005-004 Pressure Gauge Assembly – 300 Bar (NC)
38-400005-003 Pressure Gauge Assembly – 300 Bar (NO)
38-400005-002 Pressure Gauge Assembly – 200 Bar (NC)
38-400005-001 Pressure Gauge Assembly – 200 Bar (NO)
6-01-7221-0300 Manifold Pressure Gauge 1/2″ NPT, 0-400 bar x 100kpa.

CABLES

38-400005-100 PG7 Plug x 2 Cable, Dual-Core x 300mm + Quick Connects (Male & Female)
38-400005-102 Gauge Signal Line – Quick Connect (MALE) Connector with 3m Fly lead (Dual-Core Cable)
38-400005-103 Quick Connect (Male) x Dual-Core (0.34mm x 1000mm) Fly-Lead
38-400005-105 Quick Connect (Female) x Dual-Core (0.34mm x 1000mm) Fly-Lead
6-15-8020-0000 Single-Core Cable Kit + DIN Plug (Not Quick Connect) ONLY ON N/C GAUGE

80L MANIFOLDS C/W CHECK VALVES

38-351000-004 Manifold 2 stub Single row 2″ NB BSP
38-351000-005 Manifold 3 stub Single row 2″ NB BSP
38-351000-006 Manifold 4 stub Single row 2″ NB BSP
38-351000-007 Manifold 5 stub Single row 2″ NB BSP
38-351000-008 Manifold 6 stub Single row 2″ NB BSP
38-351000-009 Manifold 4 stub Double row 2″ NB BSP
38-351000-010 Manifold 6 stub Double row 2″ NB BSP
38-351000-011 Manifold 8 stub Double row 2″ NB BSP

140L MANIFOLDS C/W CHECK VALVES

38-351140-004 Manifold 2 stub Single row 2″ NB BSP
38-351140-005 Manifold 3 stub Single row 2″ NB BSP
38-351140-006 Manifold 4 stub Single row 2″ NB BSP
38-351140-007 Manifold 5 stub Single row 2″ NB BSP
38-351140-008 Manifold 6 stub Single row 2″ NB BSP
38-351140-009 Manifold 4 stub Double row 2″ NB BSP
38-351140-010 Manifold 6 stub Double row 2″ NB BSP
38-351140-011 Manifold 8 stub Double row 2″ NB BSP
6-03-5713-0000 Pressure Operated Switch
6-K4213 Copper bundy tube for pressure switch
6-03-3641-0000 Union 1/4″ BSPT x 8mm OD Copper Tube
38-400020-101 2 BSPT 3000lb Endcap
38-400020-100 2″ BSPT Manifold Coupling 3000lb
38-400002-003 Pilot line non-return valve c/w Quick connect couplings

MODULAR MULTI-WAY MANIFOLDS

6-01-3509-1000 2 Stub Modular Manifold 2″ NB BSPT PORTED
6-01-3509-1080 2 Stub Modular Manifold 2″ NB BSPT PLAIN
6-01-3509-1010 3 Stub Modular Manifold 2″ NB BSPT PORTED
6-01-3509-1090 3 Stub Modular Manifold 2″ NB BSPT PLAIN
6-01-3509-1060 2″ BSPT Manifold Union 3000lb
6-01-3509-1040 1″ Valve Adaptor – 2″ BSPP (F) to 1″BSPT (M)
6-01-3509-1050 1.1/2″ Valve Adaptor – 2″ BSPP (F) to 1.1/2″BSPT (M)
6-01-3509-1030 2″ BSPT Manifold Drop Pipe 90/90 x 1m

SELECTOR VALVES

1-22-37140-025 Selector valve 1″ BSPT c/w actuator
1-22-37140-040 Selector valve 1.5″ BSPT c/w actuator
1-22-37140-050 Selector valve 2″ BSPT c/w actuator
1-22-37140-080 Selector valve 3″ Flanged DIN2638 c/w Actuator
1-22-37140-100 Selector valve 4″ Flanged DIN2638 c/w Actuator
6-01-3661-0000 Hex Nipple 1/8″ BSP MA x 1/4″ BSP 60º (1-2″ valve)
6-15-8662-0042 Hex Nipple MA/MA 1/4″ BSPT – 1/4″ BSPT (3-4″ valve)
1-22-37451-080 ADAPTOR DN80 FLANGE TO R3″ BSPT MALE
1-22-51221-100 WELDING NECK FLANGE DN100
1-22-33480-080 Gasket DN 80 (3″)
1-22-33480-100 Gasket DN 100 (4″)
1-22-53124-290 THREADED ROD M24 X 290MM (DN80 Diverter Valve)
1-22-53127-330 THREADED ROD M27 x 330MM (DN100 Diverter Valve)
1-22-52450-244 HEX NUT M24 (DN80 Diverter Valve)
1-22-52450-274 HEX NUT M27 (DN100 Diverter Valve)

SELECTOR VALVE OUTLET ADAPTORS (Optional)

6-01-3711-3000 1″ BSPT (M) to NPT (F) Adapter
6-01-3711-4000 1-1/2” BSPT (M) to NPT (F) Adapter
6-01-3711-5000 2″ BSPT (M) to NPT (F) Adapter

NOZZLES

38-417100—- 1/2″ M400 NOZZLE 360° BSPT
38-417200—- 3/4″ M400 NOZZLE 360° BSPT
38-417300—- 1.0″ M400 NOZZLE 360° BSPT
38-417400—- 1.5″ M400 NOZZLE 360° BSPT
38-417500—- 1/2″ M400 NOZZLE 180° BSPT
38-417600—- 3/4″ M400 NOZZLE 180° BSPT
38-417700—- 1.0″ M400 NOZZLE 180° BSPT
38-417800—- 1.5″ M400 NOZZLE 180° BSPT
38-407100—- 1/2″ M400 NOZZLE 360° NPT
38-407200—- 3/4″ M400 NOZZLE 360° NPT
38-407300—- 1.0″ M400 NOZZLE 360° NPT
38-407400—- 1.5″ M400 NOZZLE 360° NPT
38-407500—- 1/2″ M400 NOZZLE 180° NPT
38-407600—- 3/4″ M400 NOZZLE 180° NPT
38-407700—- 1.0″ M400 NOZZLE 180° NPT
38-407800—- 1.5″ M400 NOZZLE 180° NPT

NOZZLE SILENCER

6-01-3470-0015 1/2″ FSN
6-01-3470-0020 3/4″ FSN
6-01-3470-0025 1″ FSN
6-01-3470-1015 1/2″ FSN (112) SHORT BODY

SIGNS

6-01-2172-0200 WARNING SIGN GB, VENT KEEP CLEAR
6-K4076-2 INERT GAS WARNING SIGN – ROOM
6-01-2178-0200 MANUAL RELEASE UNIT SIGN
6-K4076-1 INERT GAS SIGN – MANUAL CONTROL POINT
6-01-2173-0200 Caution Sign – Evacuate on Alarm Sound (BS Compliant)
6-01-2200-0002 WARNING SIGN FOR STORAGE ROOM GB
6-01-2233-0200 WARNING SIGN, NO ENTRANCE, GB
6-01-2177-0200 SIGN FOR PILOT MANIFOLD
1-WK-310330-000 Name Plate – Main
1-WK-310340-000 Name Plate – Reserve
6-K4135 Odourizer

SAFETY DEVICES

38-400006-002 Manifold Safety Device, BSP 100 BAR
1-B6793-744 Main-to-Reserve Transfer Switch (for EU)

BACKPLATE-MANIFOLD ASSEMBLY

6-01-3508-0002 Back-Plate Manifold – 2 Area, Selector Valve Control
6-01-3508-0003 Back-Plate Manifold – 3 Area, Selector Valve Control
6-01-3508-0004 Back-Plate Manifold – 4 Area, Selector Valve Control
6-01-3508-0005 Back-Plate Manifold – 5 Area, Selector Valve Control

WALL MOUNTING COMPONENTS

6-01-8121-1000 UNI STRUT WALL BRACKET, 1 CYLINDER, L = 400mm
6-01-8122-1000 UNI STRUT WALL BRACKET, 2 CYLINDERS, L = 650mm
6-01-8123-1000 UNI STRUT WALL BRACKET, 3 CYLINDERS, L = 950mm
6-01-8124-1000 UNI STRUT WALL BRACKET, 4 CYLINDERS, L = 1250mm
6-01-8125-1000 UNI STRUT WALL BRACKET, 5 CYLINDERS, L = 1550mm
6-01-8126-1000 UNI STRUT WALL BRACKET, 6 CYLINDERS, L = 1850mm
6-01-8131-0000 CLAMP FOR CYLINDER ø267 mm. SET
6-01-8131-0002 END COVER, WHITE PVC 34 x 40 mm
6-01-8141-0000 PIPE CLAMP ø31.8 – ø35.9 mm
6-01-8142-0000 PIPE CLAMP ø46.8 – ø50.8 mm
6-01-8143-0000 PIPE CLAMP ø58.7 – ø63.5 mm
6-01-8145-0000 PIPE CLAMP ø88.1 – ø95.2 mm
6-01-8160-0150 BRACKET FOR HOSE (150 mm)
6-01-8160-0200 BRACKET FOR MANIFOLD 1 ROW (200 mm)
6-01-8160-0520 BRACKET FOR MANIFOLD 2 ROWS (520 mm)
6-01-8160-0830 BRACKET FOR MANIFOLD 3 ROWS (830 mm)
6-01-8337-0100 CLAMPING BOLT, 1 ROW, L = 410mm
6-01-8337-0200 CLAMPING BOLT, FOR 2 ROWS, L = 715 mm
6-01-8337-0300 CLAMPING BOLT, FOR 3 ROWS, L = 1030 m
6-01-8660-0000 1/2″ BSP END CAP FOR CHECK VALVE
6-03-8162-0000 WOODEN SPACER 1 x 2, 45/67L CYLINDERS
6-03-8163-0000 WOODEN SPACER 1 x 3, 45/67L CYLINDERS
6-03-8164-0000 WOODEN SPACER 2 x 2, 45/67L CYLINDERS
6-03-8165-0000 WOODEN SPACER 2 x 3, 45/67L CYLINDERS
6-03-8266-0000 CLAMPING BAR, 2 x 1. 45/67L CYLINDERS
6-03-8267-0000 CLAMPING BAR, 3 x 1, 45/67L CYLINDERS
6-03-8331-0000 DISTANCE PIPE 3/4″ W/WASHERS

FIXING COMPONENTS 140L

6-01-8121-1400 UNISTRUT CYL WALL BRACKET, 1 CYL – 440MM
6-01-8123-1000 UNISTRUT CYL WALL BRACKET, 2 CYL – 950MM
6-01-8125-1000 UNISTRUT CYL WALL BRACKET, 3 CYL – 1550MM
6-01-8131-1000 SINGLE CLAMP 140L CYL GALVANIZED STEEL
6-01-8160-0250 BRACKET FOR MANIFOLD 1 ROW 250MM
6-01-8160-0600 BRACKET FOR MANIFOLD 2 ROW 600MM
6-01-8160-1000 BRACKET FOR MANIFOLD 3ROW 1000MM
6-01-8437-0100 CLAMPING BOLT 1 ROW 500MM ST.ST. – 140L
6-01-8437-0200 CLAMPING BOLT 2 ROW 895MM ST.ST. – 140L
6-01-8437-0300 CLAMPING BOLT 3 ROW 1300MM ST.ST. – 140L
6-03-8331-0140 DISTANCE PIPE 3/4″ + WASHERS 140L
6-03-8366-0000 CLAMPING BAR 1×2 FOR 140L CYL
6-03-8367-0000 CLAMPING BAR 1x3FOR 140L CYL
6-03-8368-0000 CLAMPING BAR 1×1 FOR 140L CYL
6-03-8461-0000 WOODEN SPACER 1×1 140L CYL
6-03-8462-0000 WOODEN SPACER 1×2 140L CYL
6-03-8463-0000 WOODEN SPACER 1×3 140L CYL
6-03-8464-0000 WOODEN SPACER 2×2 140L CYL
6-03-8465-0000 WOODEN SPACER 2×3 140L CYL

SPARE SERVICE LABELS

06-231867-579 LABEL – INSTRUCTION IG01 200 BAR KP 80L
06-231867-580 LABEL – INSTRUCTION IG100 200 BAR KP 80L
06-231867-581 LABEL – INSTRUCTION IG55 200 BAR KP 80L
06-231867-582 LABEL – INSTRUCTION IG541 200 BAR KP 80L
06-231867-591 LABEL – INSTRUCTION IG01 300 BAR KP 80L
06-231867-592 LABEL – INSTRUCTION IG100 300 BAR KP 80L
06-231867-593 LABEL – INSTRUCTION IG55 300 BAR KP 80L
06-231867-594 LABEL – INSTRUCTION IG541 300 BAR KP 80L
06-231867-600 LABEL – INSTRUCTION IG01 300 BAR KP 140L
06-231867-601 LABEL – INSTRUCTION IG100 300BAR KP 140L
06-231867-602 LABEL – INSTRUCTION IG55 300 BAR KP 140L
06-231867-603 LABEL – INSTRUCTION IG541 300BAR KP 140L

CYLINDERS – SPARE PARTS

38-400011-001 Muller anti-recoil cap, with actuation test pin
6-15-9604-0011 Transport Cap for 80L cylinders
6-15-9604-0014 Transport Open Cap for 140L cylinders
38-400001-010 Release Unit Service Kit includes:1 x Pin, 1 x Seal, and 10 x O-rings pack
6-15-0181-0300 Pressure gauge O-RING 17,17 x 1,78, SHORE 80, EPDM

Enquire About This Product