Simtronics DF-TV7 Flame Detector

Code: DF-TV7
  • IR & UV/IR Series
  • SIL, ATEX, IECEx & CE DPC approvals
  • Range of accessories available

In Stock
Make An Enquiry

Simtronics DF-TV7 MultiFlame series by Teledyne is designed to detect fires, whilst minimising false alarms. Equipped with an intelligent self-test ensuring the optical path is clear and that the detector is operating correctly.  It is certified and can be installed in a SIL2 level system. Connecting to a wide range of traditional or fire controllers and on Programmable Logic Controllers (PLC). Supplied with a configurable 4-20mA or 0-22mA (PLC) output, two configurable alarm relays, and two detector status LEDs. HART 7 and Syntel is optional.

Sensors can be replaced easily in the field without removing any cable glands. Devices are easy to test and configure using the hand-held TLU600 portable communication wireless terminal. Time delay, sensitivity and outputs configuration can be fully set up via the TLU600, a hazardous area approved remote control. Optical and electronic parts and outputs (current, relay…) of the detector can be controlled by the TLU.

The MultiFlame range has two versions:

  • DF-TV7-T multi-spectrum Infrared flame detector using three wavelengths. Used in dirty environments, for detection of hydrocarbon and smoky fires. SIL3 certified.
  • DF-TV7-V multi-flame combined ultraviolet /infrared flame detector. Used in difficult environmental conditions, such as combined rain and wind, rapid sunshine variations, hot sources modulations, industrial lighting etc. SIL2 certified. UV can be sensitive to welding radiation or lightning, X rays and gamma rays.

Common Features

  • Continuous auto-check of optical lens
  • Relays, 4-20mA, 0-22mA, Hart outputs
  • Long-range up to 80m, 260 ft deep
  • Wide field of view
  • Range previously by Simrad Optronics

The MultiFlame models are also available for use in an addressable network system with distributed intelligence SYNTEL. This version is named DF-RV7.

Enquire About This Product

Title Size
DF-TV7-T Datasheet 109 KB
DF-TV7-V Datasheet 105 KB
DF-TV7 Operation Manual 1 MB
Syntel Brochure 388 KB

Additional information

Weight0.09 kg

Ordering Information

DF-TV7 UV2IR and 3IR flame detectors, SS316L. This range complies with EN5410 standards (visual alarm status recorded)

3IR Multispectrum IR

DF-TV7-XTA0-0XC-00 MultiFlame detector 3IR Standard range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)
DF-TV7-XTA0-0XH-00 MultiFlame detector 3IR Standard range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)
DF-TV7-XTB0-0XC-00 MultiFlame detector 3IR Long-range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)
DF-TV7-XTB0-0XH-00 MultiFlame detector 3IR Long-range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)

UV2IR UV/2IR

DF-TV7-XVA0-0XC-00 MultiFlame detector UV2IR Standard range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx EN5410)
DF-TV7-XVA0-0XH-00 MultiFlame detector UV2IR Standard range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)

DF-TV7/N UV2IR and 3IR flame detectors, SS316L. This range DOES NOT comply with EN5410 standards (visual alarm status NOT latched)

3IR Multispectrum IR

DF-TV7-XTA0-0XC-0N MultiFlame detector 3IR Standard range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx)
DF-TV7-XTA0-0XH-0N MultiFlame detector 3IR Standard range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx)
DF-TV7-XTB0-0XC-0N MultiFlame detector 3IR Long-range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx)
DF-TV7-XTB0-0XH-0N MultiFlame detector 3IR Long-range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx)

UV2IR UV/2IR

DF-TV7-XVA0-0XC-0N MultiFlame detector UV2IR Standard range, Configurable output, SS 316L (Cert. ATEX Ex d – IECEx)
DF-TV7-XVA0-0XH-0N MultiFlame detector UV2IR Standard range, HART protocol, SS 316L (Cert. ATEX Ex d – IECEx)

DF-RV7 UV2IR and 3IR flame detectors for SYNTEL, SS316L. This range complies with EN5410 standards (visual alarm status recorded)

3IR Multispectrum IR

DF-RV7-XTA0-0XL-00 MultiFlame detector 3IR Standard range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)
DF-RV7-XTB0-0XL-00 MultiFlame detector 3IR Long-range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)

UV2IR UV/2IR

DF-RV7-XVA0-0XL-00 MultiFlame detector UV2IR Standard range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx – EN5410)

DF-RV7/N UV2IR and 3IR flame detectors for SYNTEL, SS316L. This range DOES NOT comply with EN5410 standards (visual alarm status NOT latched)

3IR Multispectrum IR

DF-RV7-XTA0-0XL-0N MultiFlame detector 3IR Standard range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx)
DF-RV7-XTB0-0XL-0N MultiFlame detector 3IR Long-range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx)

UV2IR UV/2IR

DF-RV7-XVA0-0XL-0N MultiFlame detector UV2IR Standard range, LON protocol, SS 316L (Cert. ATEX Ex d – IECEx)

Spares and sensors for MultiFlame detectors range

TV Cartridges

3IR Multispectrum IR

DM-SV6-XTA0-0A0-00 MultiFlame cartridge Standard range 3IR, Aluminum, for DM6 Series
DM-SV6-XTA0-0X0-00 MultiFlame cartridge Standard range 3IR, Stainless Steel, for DF7 Series
DM-SV6-XTB0-0A0-00 MultiFlame cartridge Long-range 3IR, Aluminum, for DM6 Series 1
DM-SV6-XTB0-0X0-00 MultiFlame cartridge Long-range 3IR, Stainless Steel, for DF7 Series 2

UV2IR UV/2IR

DM-SV6-XVA0-0A0-00 MultiFlame cartridge Standard range UV2IR, Aluminum, for DM6 Series 2
DM-SV6-XVA0-0X0-00 MultiFlame cartridge Standard range UV2IR, Stainless Steel, for DF7 Series 2

Enquire About This Product