Honeywell XNX Universal Transmitter

Code: XNX
  • Suitable for flammable, O2 & toxic gases
  • Range of models
  • A common mode of operation

In Stock
Make An Enquiry

The Honeywell Analytics XNX Universal Transmitter supports all gas detection techniques, with models accepting catalytic bead, infrared and electrochemical sensors. Fully compatible with the following detectors; Sensepoint, Optima Plus, 705 and Searchline Excel open path. Flammable, Toxic and Oxygen gases can be monitored.

Suitable for all fixed gas detection large or small scale, acting as a universal platform, resulting in less training and standardised fault recognition. Includes HART communication superimposed over the 4-20mA signal, so no extra wiring is needed, enabling remote configuration and diagnostics. For local configuration by HART, a handheld device IS connection port version is available. Other options include up to 3 relays, Modbus and Foundation H1 Fieldbus.  Communication is possible with most programmable logic controllers and third party gas detection controllers.

Gas readings and status are visible by a multi-language backlit LCD, with text, bar graph and icons. The XNX is fully configurable via non-intrusive magnetic switches, so there is no need to open the unit.  No hot work permit needed, intrinsically safe connections and automatic sensor recognition allow a hot swap of toxic and oxygen sensor cartridges.

  • Housing Aluminum LM25 or Stainless Steel 316
  • One person operation
  • Self-testing & fault notification
  • Operating temperature -40° to +65°C
  • Calibration with auto inhibit
  • Analogue output choose source, sink or isolated
  • Factory calibrated sensors accepted – plug and play
  • Ingress protection IP 66
  • Approvals; ATEX, UL, CSA, IECEx, INMETRO, CU-TR, IEC61508 and SIL 2
  • Size 160mm x 197mm x 114mm. Weight Aluminum 2.8kg, Stainless Steel 5kg
  • Tariff code 9027101000

Enquire About This Product

Title Size
XNX Universal Transmitter 501 KB
Honeywell XNX Brochure Detailed 1 MB
XNX Safety Manual 946 KB
XNX Spec Sheet 205 KB
Engineering Specifications-XNX Universal Transmitter 262 KB
XNX Product Overview 2 MB
Foundation Fieldbus Manual revision 3 MB
XNX Quick Start Guide 4 MB
Functional Safety TechNote 360 KB
XNX Training Presentation 6 MB

Ordering Information

XNX Universal Transmitter with MPD Sensor

XNX Universal transmitter including MPD sensor and sensor cartridge. Each gas detector (transmitter and MPD sensor) is supplied with blanking plugs, magnetic wand/screwdriver tool, hex keys, electrical jumpers, printed quick start guide and CD-ROM.

XNX Stainless Steel Gas Detector ATEX/IECEx/INMETRO with MPD Catalytic Sensor 0-100%LEL

XNX-AMSV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25
entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-FNCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-AMSV-FHCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX Aluminum Transmitter ATEX/IECEx/INMETRO with MPD Catalytic Sensor 0-100%LEL

XNX-AMAV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-FNCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-AMAV-FHCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX Stainless Steel Transmitter ATEX/IECEx/INMETRO with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-AMSV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMSV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR Hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMSV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMSV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0- 100%LEL

XNX-AMSV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMSV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0- 100%LEL

XNX-AMSV-FNIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMSV-FHIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0- 100%LEL

XNX Aluminium Transmitter ATEX/IECEx/INMETRO with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-AMAV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-FNIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-AMAV-FHIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX Stainless Steel Transmitter ATEX/IECEx/INMETRO with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-AMSV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMSV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMSV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMSV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0- 100%LEL (0-5%v/v)

XNX-AMSV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMSV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0- 100%LEL (0-5%v/v)

XNX-AMSV-FNIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMSV-FHIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0- 100%LEL (0-5%v/v)

XNX Aluminium Transmitter ATEX/IECEx/INMETRO with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-AMAV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-FNIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-AMAV-FHIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX Stainless Steel Transmitter ATEX/IECEx/INMETRO with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-AMSV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-FNIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMSV-FHIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX Aluminium Transmitter ATEX/IECEx/INMETRO with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-AMAV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-FNIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-AMAV-FHIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX Stainless Steel Transmitter UL/CSA with MPD Catalytic Sensor 0-100%LEL

XNX-UTSV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-FNCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-UTSV-FHCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX Aluminum Transmitter UL/CSA with MPD Catalytic Sensor 0-100%LEL

XNX-UTAV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-FNCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-UTAV-FHCB1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX Stainless Steel Transmitter UL/CSA with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-UTSV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-FNIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTSV-FHIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX Aluminium Transmitter UL/CSA with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-UTAV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0- 100%LEL

XNX-UTAV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-FNIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-UTAV-FHIF1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0- 100%LEL

XNX Stainless Steel Transmitter UL/CSA with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-UTSV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-FNIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTSV-FHIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX Aluminium Transmitter UL/CSA with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-UTAV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTAV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTAV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTAV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0- 100%LEL (0-5%v/v)

XNX-UTAV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTAV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0- 5%v/v)

XNX-UTAV-FNIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-UTAV-FHIV1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX Stainless Steel Transmitter UL/CSA with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-UTSV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-FNIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTSV-FHIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX Aluminium Transmitter UL/CSA with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-UTAV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-FNIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-UTAV-FHIC1 XNX Gas Detector, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX Stainless Steel Gas Detector CU-TR with MPD Catalytic Sensor 0-100%LEL

XNX-RMSV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-RMSV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-RMSV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, Cu-TR, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-RMSV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-RMSV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX-RMSV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD catalytic sensor 0-100%LEL

XNX Aluminum Transmitter CU-TR with MPD Catalytic Sensor 0-100%LEL

XNX-RMAV-NNCB1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-RMAV-NHCB1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-RMAV-RNCB1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-RMAV-RHCB1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-RMAV-MNCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX-RMAV-MHCB1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD catalytic sensor 0-100%LEL

XNX Stainless Steel Transmitter CU-TR with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-RMSV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMSV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMSV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMSV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMSV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMSV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX Aluminium Transmitter CU-TR with MPD Infrared Hydrocarbon (Propane) Sensor 0-100%LEL

XNX-RMAV-NNIF1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMAV-NHIF1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMAV-RNIF1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMAV-RHIF1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMAV-MNIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX-RMAV-MHIF1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Propane) sensor 0-100%LEL

XNX Stainless Steel Transmitter CU-TR with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-RMSV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMSV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMSV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMSV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMSV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMSV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX Aluminium Transmitter CU-TR with MPD Infrared Methane Sensor 0-100%LEL (0-5%V/V).

XNX-RMAV-NNIV1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMAV-NHIV1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMAV-RNIV1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMAV-RHIV1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0- 5%v/v)

XNX-RMAV-MNIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX-RMAV-MHIV1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR hydrocarbon (Methane) sensor 0-100%LEL (0-5%v/v)

XNX Stainless Steel Transmitter CU-TR with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-RMSV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMSV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMSV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMSV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMSV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMSV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, includes MPD IR CO2 sensor 0-5%v/v

XNX Aluminium Transmitter CU-TR with MPD Infrared CO2 Sensor 0-5%V/V.

XNX-RMAV-NNIC1 XNX Gas Detector, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMAV-NHIC1 XNX Gas Detector, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMAV-RNIC1 XNX Gas Detector, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMAV-RHIC1 XNX Gas Detector, HART® over 4-20mA output, 3 fault/alarm relays and local HART® interface port, CUTR, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMAV-MNIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

XNX-RMAV-MHIC1 XNX Gas Detector, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, includes MPD IR CO2 sensor 0-5%v/v

Spare MPD Sensors

MPD: Multi-Purpose Detector (mV) – ATEX/IECEx/INMETRO

MPD-AMCB1 XNX MPD Sensor, M25, ATEX/IECEx/INMETRO, Catalytic Bead, Flammables (Methane Cal) 0-100%LEL
MPD-AMIF1 XNX MPD Sensor, M25, ATEX/IECEx/INMETRO, IR Hydrocarbons (Propane Cal) 0-100%LEL
MPD-AMIV1 XNX MPD Sensor, M25, ATEX/IECEx/INMETRO, IR Methane 0-100%LEL or 0-5.00% v/v
MPD-AMIC1 XNX MPD Sensor, M25, ATEX/IECEx/INMETRO, IR Carbon Dioxide 0-5% v/v

MPD: Multi-Purpose Detector (mV) – UL/CSA

MPD-UTCB1 XNX MPD Sensor, 3/4″NPT, UL/CSA, Catalytic Bead, Flammables (Methane Cal) 0-100%LEL
MPD-UTIF1 XNX MPD Sensor, 3/4″NPT, UL/CSA, IR Hydrocarbons (Propane Cal) 0-100%LEL
MPD-UTIV1 XNX MPD Sensor, 3/4″NPT, UL/CSA, IR Methane 0-100%LEL or 0-5.00% v/v
MPD-UTIC1 XNX MPD Sensor, 3/4″NPT, UL/CSA, IR Carbon Dioxide 0-5% v/v

MPD: Multi-Purpose Detector (mV) – CU-TR

MPD-RMCB1 XNX MPD Sensor, M25, CU-TR, Catalytic Bead, Flammables (Methane Cal) 0-100%LEL
MPD-RMIF1 XNX MPD Sensor, M25, CU-TR, IR Hydrocarbons (Propane Cal) 0-100%LEL
MPD-RMIV1 XNX MPD Sensor, M25, CU-TR, IR Methane 0-100%LEL or 0-5.00% v/v
MPD-RMIC1 XNX MPD Sensor, M25, CU-TR, IR Carbon Dioxide 0-5% v/v

MPD Replaceable Cells

1226A0359 XNX MPD Replaceable Cell Catalytic Bead, Flammables (Methane Cal) 0-100%LEL
1226-0300 XNX MPD Replaceable Cell, IR Hydrocarbons (Propane Cal) 0-100%LEL
1226-0299 XNX MPD Replaceable Cell IR Methane 0-100%LEL or 0-5.00% Vol.
1226-0301 XNX MPD Replaceable Cell IR Carbon Dioxide 0-5.00% Vol

XNX Universal Transmitter (Flammable)

XNX Universal Transmitter excluding Sensepoint High Temp or 705HT Sensor. Order required sensor separately. Each transmitter is supplied configured and tested for mV input sensors, with a magnetic wand/screwdriver, allen keys, jumpers, blanking plugs.

XNX Stainless Steel Transmitter ATEX/IEC for use with Sensepoint High-Temperature Sensor

XNX-AMSV-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-AMSV-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX Aluminum Transmitter ATEX/IECEx for use with Sensepoint High-Temperature Sensor

XNX-AMAV-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-AMAV-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX Stainless Steel Transmitter UL/CSA for use with model 705 High-Temperature Sensor

XNX-UTSV-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX-UTSV-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for 705 High-Temperature Sensor

XNX Aluminum Transmitter UL/CSA for use with 705 High-Temperature Sensor

XNX-UTAV-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for 705 High-Temperature Sensor

XNX-UTAV-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted LM25, configured for 705 High-Temperature Sensor

XNX Stainless Steel Transmitter CU-TR for use with Sensepoint High-Temperature Sensor

XNX-RMSV-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-RMSV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-RMSV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-RMSV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-RMSV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 5 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX-RMSV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Sensepoint High-Temperature Sensor

XNX Aluminum Transmitter CU-TR for use with Sensepoint High-Temperature Sensor

XNX-RMAV-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-RMAV-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-RMAV-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-RMAV-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-RMAV-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 5 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX-RMAV-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Sensepoint High-Temperature Sensor

XNX Universal Transmitter (Toxic/Oxygen)

XNX Universal Transmitter including sensor socket; but, excluding toxic or oxygen sensor. Order required sensor separately from the XNX toxic and oxygen sensors section below. Supplied with a magnetic and/screwdriver, allen keys, jumpers, blanking plugs.

XNX Stainless Steel Transmitter ATEX/IECEx/INMETRO for use with XNX Toxic and Oxygen Sensors

XNX-AMSE-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-AMSE-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX Aluminium Transmitter ATEX/IECEx/INMETRO for use with XNX Toxic and Oxygen Sensors

XNX-AMAE-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx/INMETRO, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-AMAE-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx/INMETRO, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX Stainless Steel Transmitter UL/CSA for use with XNX Toxic and Oxygen Sensors

XNX-UTSE-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-UTSE-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX Aluminium Transmitter UL/CSA for use with XNX Toxic and Oxygen Sensors

XNX-UTAE-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-UTAE-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 3 x 3/4″NPT entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX Stainless Steel Transmitter CU-TR for use with XNX Toxic and Oxygen Sensors

XNX-RMSE-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-RMSE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-RMSE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-RMSE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-RMSE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX-RMSE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted 316SS, configured for XNX toxic and Oxygen sensors

XNX Aluminium Transmitter CU-TR for use with XNX Toxic and Oxygen Sensors

XNX-RMAE-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-RMAE-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-RMAE-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-RMAE-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-RMAE-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 4 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX-RMAE-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 3 x M25 entries, painted Aluminium, configured for XNX toxic and Oxygen sensors

XNX Toxic & Oxygen Sensors

A range of toxic and Oxygen sensors for use with the XNX transmitter. Sensors have replaceable Cells.

XNXXSO1SS XNX sensor Oxygen 0-25% v/v
XNXXSC1SS XNX sensor Carbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
XNXXSH3SS XNX sensor Hydrogen Sulfide 0-5ppm (1.5 to 5ppm, 0.1ppm)
XNXXSH1SS XNX sensor Hydrogen Sulfide 0-15ppm (10 to 50ppm, 1ppm)
XNXXSH2SS XNX sensor Hydrogen Sulfide 0-100ppm (50 to 500ppm, 10ppm)
XNXXSL1SS XNX sensor Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
XNXXSL2SS XNX sensor Chlorine 0-5.0ppm
XNXXSS1SS XNX sensor Sulfur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
XNXXSS2SS XNX sensor Sulfur Dioxide 0-50.0ppm
XNXXSX1SS XNX sensor Chlorine Dioxide 0-1.00ppm
XNXXSM1SS XNX sensor Nitrogen Monoxide 0-100ppm
XNXXSN1SS XNX sensor Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
XNXXSG1SS XNX sensor Hydrogen 0-1000ppm
XNXXSG2SS XNX sensor Hydrogen 0-10,000ppm
XNXXSR1SS XNX sensor Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
XNXXSY1SS XNX sensor Hydrogen Cyanide 0-30.0ppm (Fixed Scale)
XNXXSF1SS XNX sensor Hydrogen Fluoride 0-12.0ppm (Fixed Scale)
XNXXSA1SS XNX sensor Ammonia 0-200ppm (50 to 200ppm, 50ppm)
XNXXSA2SS XNX sensor Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)
XNXXSP1SS XNX sensor Phosphine 0-1.2ppm (Fixed Scale)
XNXXSU1SS XNX sensor Fluorine 4 ppm
XNXXSE1SS XNX sensor Ethylene Oxide (ETO) 25.0ppm (20 to 50ppm)

XNX Toxic and Oxygen Sensors – CU-TR

XNXXSO1CU XNX sensor Oxygen 0-25% v/v
XNXXSC1CU XNX sensor Carbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
XNXXSH3CU XNX sensor Hydrogen Sulfide 0-5ppm (1.5 to 5ppm, 0.1ppm)
XNXXSH1CU XNX sensor Hydrogen Sulfide 0-15ppm (10 to 50ppm, 1ppm)
XNXXSH2CU XNX sensor Hydrogen Sulfide 0-100ppm (50 to 500ppm, 10ppm)
XNXXSL1CU XNX sensor Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
XNXXSL2CU XNX sensor Chlorine 0-5.0ppm
XNXXSS1CU XNX sensor Sulfur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
XNXXSS2CU XNX sensor Sulfur Dioxide 0-50.0ppm
XNXXSX1CU XNX sensor Chlorine Dioxide 0-1.00ppm
XNXXSM1CU XNX sensor Nitrogen Monoxide 0-100ppm
XNXXSN1CU XNX sensor Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
XNXXSG1CU XNX sensor Hydrogen 0-1000ppm
XNXXSG2CU XNX sensor Hydrogen 0-10,000ppm
XNXXSR1CU XNX sensor Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
XNXXSY1CU XNX sensor Hydrogen Cyanide 0-30.0ppm (Fixed Scale)
XNXXSF1CU XNX sensor Hydrogen Fluoride 0-12.0ppm (Fixed Scale)
XNXXSA1CU XNX sensor Ammonia 0-200ppm (50 to 200ppm, 50ppm)
XNXXSA2CU XNX sensor Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)
XNXXSP1CU XNX sensor Phosphine 0-1.2ppm (Fixed Scale)
XNXXSU1CU XNX sensor Fluorine 4 ppm
XNXXSE1CU XNX sensor Ethylene Oxide (ETO) 25.0ppm (20 to 50ppm)

XNX Replacement Toxic & Oxygen Sensor Replaceable Cells

Replacement toxic and oxygen sensor replaceable cells for use in the XNX toxic and oxygen sensor.

XNXO1SS XNX Replaceable Cell Oxygen 0-25% v/v
XNXC1SS XNX Replaceable Cell Carbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
XNXH3SS XNX Replaceable Cell Hydrogen Sulfide 0-5ppm (1.5 to 5ppm, 0.1ppm)
XNXH1SS XNX Replaceable Cell Hydrogen Sulfide 0-15ppm (10 to 50ppm, 1ppm)
XNXH2SS XNX Replaceable Cell Hydrogen Sulfide 0-100ppm (50 to 500ppm, 10ppm)
XNXL1SS XNX Replaceable Cell Chlorine 0-5.0ppm
XNXS1SS XNX Replaceable Cell Sulfur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
XNXX1SS XNX Replaceable Cell Chlorine Dioxide 0-1.00ppm
XNXM1SS XNX Replaceable Cell Nitrogen Monoxide 0-100ppm
XNXN1SS XNX Replaceable Cell Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
XNXG1SS XNX Replaceable Cell Hydrogen 0-1000ppm
XNXG2SS XNX Replaceable Cell Hydrogen 0-10,000ppm
XNXR1SS XNX Replaceable Cell Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
XNXY1SS XNX Replaceable Cell Hydrogen Cyanide 0-30.0ppm (Fixed Scale)
XNXF1SS XNX Replaceable Cell Hydrogen Fluoride 0-12.0ppm (Fixed Scale)
XNXA1SS XNX Replaceable Cell Ammonia 0-200ppm (50 to 200ppm, 50ppm)
XNXA2SS XNX Replaceable Cell Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)
XNXP1SS XNX Replaceable Cell Phosphine 0-1.2ppm (Fixed Scale)
XNXU1SS XNX Replaceable Cell Fluorine 4ppm
XNXE1SS XNX Replaceable Cell Ethylene Oxide (ETO) 25.0ppm (20.0 to 50.0ppm)

XNX Universal Transmitter for use with Optima Plus or Excel Detectors

Order Optima Plus and Excel detectors separately. Each transmitter is supplied configured and tested for Optima Plus or Excel input, with a magnetic wand/screwdriver, allen keys, jumpers and blanking plug,
Searchline Excel Kits here

XNX Stainless Steel Transmitter ATEX/IECEx for use with Optima Plus and Searchline Excel Detectors

XNX-AMSI-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-AMSI-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX Aluminium Transmitter ATEX/IEC for use with Optima Plus and Searchline Excel Detectors

XNX-AMAI-NNNNN XNX Transmitter, HART® over 4-20mA output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, ATEX/IECEx, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-AMAI-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, ATEX/IECEx, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX Stainless Steel Transmitter UL/CSA for use with Optima Plus and Searchline Excel Detectors

XNX-UTSI-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 5 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX-UTSI-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted 316SS, configured for Optima Plus and Excel

XNX Aluminium Transmitter UL/CSA for use with Optima Plus and Searchline Excel Detectors

XNX-UTAI-NNNNN XNX Transmitter, HART® over 4-20mA output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-FNNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output, UL/CSA, 5 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX-UTAI-FHNNN XNX Transmitter, HART® over 4-20mA and Foundation Fieldbus™ output and local HART® interface port, UL/CSA, 4 x 3/4″NPT entries, painted Aluminium, configured for Optima Plus and Excel

XNX Stainless Steel Transmitter CU-TR for use with Optima Plus and Searchline Excel Detectors

XNX-RMSI-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-RMSI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-RMSI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-RMSI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-RMSI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 5 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX-RMSI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 4 x M25 entries, painted 316SS, configured for Optima Plus and Excel

XNX Aluminum Transmitter CU-TR for use with Optima Plus and Searchline Excel Detectors

XNX-RMAI-NNNNN XNX Transmitter, HART® over 4-20mA output, CU-TR, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-RMAI-NHNNN XNX Transmitter, HART® over 4-20mA output and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-RMAI-RNNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays, CU-TR, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-RMAI-RHNNN XNX Transmitter, HART® over 4-20mA output and 3 fault/alarm relays and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-RMAI-MNNNN XNX Transmitter, HART® over 4-20mA and Modbus output, CU-TR, 5 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

XNX-RMAI-MHNNN XNX Transmitter, HART® over 4-20mA and Modbus output and local HART® interface port, CU-TR, 4 x M25 entries, painted Aluminium, configured for Optima Plus and Excel

Enquire About This Product