Drager Regard-1

Code: Regard-1
  • Available from stock remaining
  • No longer manufactured
  • Single-channel controller

In StockMake An Enquiry

The Drager Regard-1 is discontinued, some stock is left, replacement here. An independent single-channel control system for Toxic or O2 or Flammable gas.  Accepting a 4 to 20 mA signal from a detector transmitter or paired directly with a Polytron SE Ex measuring head. The gas reading is shown on a large LC display. If a hazard is detected, the built-in buzzer will sound.  Three flashing LEDs will also indicate the alarm. If a fault is detected, this is shown on a separate flashing LED, once acknowledged the light would be constant.

Battery pack up allows continued operation during a power outage. Two batteries of 1.2 Ah each can be inserted which would enable use between 30-120 minutes; the Regard can also recharge the batteries.

An optional time-weighted average module can be added, which outputs an alarm, 4-20mA repeat and provides RS232 digital output.  As standard, the Regard-1 provides three gas alarm relays, fault relay and inhibit relay. Activation of the inhibit relay is recommended during maintenance work.

  • Operating temperature 0 to 55 °C; 32 to 130 °F
  • Power supply: 110/240 VAC, 50/60 Hz
  • Flexible, mA or mV inputs
  • Housing is IP65 rated, made from Acrylonitrile butadiene styrene. Suitable for indoor and outdoor applications. ATEX approved.
  • Size 270 x 270 x 90 mm, (H x W x D). Weight 2.5 kg

Order Information

4208585 Input 4 to 20 mA – sale out stock still available
4208600 Input SE Ex (mV)
4208586 Rechargeable battery kit
4208583 Options board (4 to 20 mA repeater, RS 232, TWA alarm relays)
4208636 Display board with data logger

Enquire About This Product

Title Size
Regard 1 Brochure 2 MB
regard 1 manual 957 KB

Additional information

Weight 0.09 kg