The ABB Furse ESP 415 M4R includes a remote display. The protector can be connected via one of the distribution board’s outgoing fuseways or circuit breakers—ideally, to the outgoing way nearest the incoming supply (or isolator). Suitable for hard-to-access areas or inside enclosures where the remote display can be visible elsewhere or outside a cabinet.
A combined type one, two and three surge protective device housed in steel with a very high surge current rating.
Features
- Extra high maximum surge current of 120kA (480kA unit total)
- Very low let-through voltage between all sets of conductors (phase to neutral, phase to earth and neutral to earth).
- Repeated protection in lightning-intense environments, with 20 years predicted lifetime.
- Innovative Sovtrip multiple thermal disconnect technology anticipates standards authorities’ future demands for safe disconnection from faulty or abnormal supplies (without compromising protective performance).
- Three-way visual indication of protection status.
- Advanced pre-failure warning, so you need never be unprotected.
- A remote indication facility allows pre-failure warning to be linked to a building management system, buzzer or light.
- Changeover active volt-free contact enables the protector to warn of phase loss (i.e. power failure, blown fuses, etc.).
- Unique flashing warning of potentially fatal neutral-to-earth supply faults (caused by incorrect earthing, wiring errors or unbalanced conditions).
- Robust steel housing.
- The protector base provides ultra-low inductance earth bonds to metal panels.
- Convenient holes for flat mounting.
- Compact size for installation in the power distribution board.
- Maintenance free
Technical Information
- Standards: IEC 61643-11
- Type of Low Voltage Distribution System: TN TT
- Suitable For: To protect systems against transient overvoltages or surges from lightning and electrical switching events
- Nominal AC Voltage of the System (Uo):240 V
- Voltage Protection Level ( Up):600 V
- Maximum Continuous Operating Voltage (Uc):280 V
- Temporary Overvoltage Test Value (UT):350 V
- Discharge Current: Nominal 25 kA
- I (max, 8 / 20 µs) 150 kA
- Rated Frequency (f):50 / 60 Hz
- Short-Circuit Protective Devices:≤ 315 A
- Arrester Class:I II III
- Number of Protected Poles:7
- Connection Type: Screw Clamp
- Auxiliary Circuit Load: 250Vac – 1A
- Remote Indicator: Yes
- Wire Stripping Length:17 mm
- Environmental Ambient Air Temperature: Operation -40 … +80 °C
- RoHS Status: Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
- Dimensions Width:226 mm Height:204 mm Depth / Length:125 mm Weight:3.90 kg
- Package Level 1 EAN: 5414363504917
- Customs Tariff Number:8536308000
- Country of Origin: United Kingdom (GB)
- Certificates and Declarations (Document Number)
- Declaration of Conformity – CE:7TKK001514
- Instructions and Manuals:9AKK106713A1360
- REACH Declaration:9AKK108466A5047
- RoHS Information:9AKK108466A5046
Classifications
- ETIM 7:EC000941 – Surge protection device for power supply systems
- WEEE Category:5. Small Equipment (No External Dimension More Than 50 cm)
- WEEE B2C / B2B: Business To Business
