Spectrex SharpEye 40/40UFL Flame Detector

High-Speed Optical Flame detector designed to meet two major requirements:

– High-Speed Response (20 msec)
– High Reliability (immunity to false alarm)

This detector is based on our well known military detector used in Armored Vehicle Explosion Suppression System combined with the industrial detector 40/40LB.

It can detect hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, as well as metal and inorganic fires. The UV/IR flame detector senses radiant energy in the short wave section of both the ultraviolet and infrared portions of the electromagnetic spectrum. The signals from both sensors are analysed for frequency, intensity and duration. Simultaneous detection of radiant energy in both the UV and IR sensors triggers an alarm signal.

The UV sensor incorporates a special logic circuit that helps prevent false alarms caused by solar radiation.

Features

• Solar blind
• Automatic Built-In-Test (BIT) and manual – to assure continued reliable operation
• Aluminium or Stainless Steel housing
• Heated window – for operation in harsh weather conditions (snow, ice, condensation)
• Multiple output options for maximum flexibility and compatibility
  • Relays (3) for Alarm, Fault and Auxiliary
  • 0-20mA (stepped)
  • HART Protocol for maintenance and asset management
  • RS-485, Modbus Compatible
• High Reliability – MTBF – minimum 150,000 hours
• User Programmable via HART or RS-485
• Hazardous area zones:
  • Zones 1 & 2 with IIC gas group vapours present
  • Zones 21 & 22 with IIIC dust type present
• Ex approved to:
  • ATEX & IECEx
  • FM/FMC/CSA
  • TR CU (EAC)
• 3rd party performance approved
  • EN54-10 (VDS)
  • FM3260
• Reliability
  • IEC61508 – SIL2 (TUV)

Accessories

40/40-001 Tilt, 777090, Stainless steel
777670 40/40 Duct Mount, Stainless steel
777163 40/40 Weather Cover, Stainless steel
777166 40/40 Cone Viewer ( laser aimers (2x) not included)
777263 40/40 Weather Cover, ABS Plastic
777563 40/40 FOV field of view limiter, stainless steel
777650 40/40 Air Shield, Stainless steel
789260-1 Pole Mount(U-BOLT) – 3″, Stainless steel
789260-2 Pole Mount(U-BOLT) – 2″, Stainless steel
789260-3 Pole Mount (U-BOLT) – 4″, Stainless steel
794079 USB/RS485 Converter Kit
888810 HART Hand Held Diagnostics Unit (ATEX IS)