Seaward AGL-5 Airfield Ground Lighting Voltage Detector

Code: AGL-5
  • Portable
  • For Use With All AGL Systems up to 5kV
  • Proving Unit Included For Testing

In StockMake An Enquiry

Seaward AGL-5 Voltage Detector is primarily used on airfield ground lighting systems. It can also be used for remotely operated vehicles and offshore. A two pole detector of voltages over 50V AC or 70V DC. Suitable for proving dead on AGL systems up to 5000V AC or DC.

Housing is impact resistant, tough and IP64 rated.  Voltage is indicated by two ultra bright high intensity red LED indicators and a polarising filter insure maximum visibility in varying light conditions. The LEDs illuminate when voltage exceeds the threshold voltage present at the probe tips.

The AGL-5 is supplied complete with PH3-LLT proving unit, which provides an output voltage of 500V dc, for proof testing before and after use.

  • Compatible with all AGL systems up to 5kV
  • High visibility indicators
  • Compact and portable
  • Fully compliant with all relevant domestic and international standards: BS EN 61243-2:1998, BS EN 61243-3:1999, BS EN 61326:1998. Voltage Detector  IEC 61243-2 and IEC 61243-3. Proving Unit BS EN 61010-1
  • Includes proving unit and protective case

Ordering Information

374A910 Air Ground Lighting Tester AGL-5 with proving unit, carry case and operating instructions

Enquire About This Product

Title Size
AGL-5 Data Sheet 1 MB
agl_user_manual_rev1_v1 63 KB
AGL PR 2015 - Jersey Airport testing.doc 25 KB

Additional information

Weight 0.09 kg


AGL-5 Two Pole Voltage Detector
Maximum Working Voltage 5000V AC/DC
Threshold voltage 50V AC / 70V DC
Operating Current <3.5mA AC/DC at max working voltage
Indicator High intensity LED with polarizing filter
Handle length 160mm
Overall Length 530mm
Probe tip length 38mm
Hand guard height >10mm over 70% circumference
Length of insulation between contact electrode and handguard 574mm
Un-insulated contact electrode length 5mm
Contact Electrode diameter 3mm
Lead length between probes 0.8m triple insulated cable
Construction High Impact, total encapsulation
PH3-LLT Proving Unit
Output Voltage 500V dc nominal
Output current 0.45mA into 2kohm
Terminals Two non-touchable
Indicator Neon ‘active’

Enquire About This Product