Radiodetection’s SuperCAT4+ and T1 are easy to use, utility-specific locating tools with enhanced features for the challenges faced by particular industries.
Each model has been designed to meet the needs of a specific industry:
- SuperCAT4+CPS – find oil and gas pipelines using rectified CPS signals.
- SuperCAT4+S – use a range of sondes to find water and drain pipes, and telecom ducts.
- SuperCAT4+ – Multi-frequency cable locator with transmitter options for high impedance telecom cables or low impedance power cables.
Locate and protect underground assets
Safe excavation relies on the accurate locating of buried assets. Failure to accurately identify utilities’ presence may result in damage to underground pipes and cables, which can lead to utility outages, costly repairs, and project delays. In some instances, personal injuries can result.
Detect more, reduce utility strikes
Each model of the SuperCAT4+ and T1 range is tailored to a utility:
- For oil and gas pipes using a Cathodic Protection System, the CPS model can locate the rectified signal without attaching an additional transmitter.
- The S model locates a range of sonde frequencies that can be matched to the challenges of finding water and drain pipes. Low-frequency sondes are used to trace cast-iron pipes. Higher frequencies sondes are used to trace non-metallic pipes and conduits.
- SuperCAT4+ can be used to locate a comprehensive set of active frequencies to support the detection and tracing of different cable types in varied environmental conditions. Higher frequencies such as the 131kHz or 65kHz can be used to find well insulated, high resistance, utilities such as small core telecoms cables or insulated pipe joints. For long-range locating of lower resistance utilities such as power cables or metallic pipelines, lower frequency options are available.
Accessories to extend your capabilities
- An array of accessories are available for the SuperCAT4+ range to apply signals safely and effectively to pipes and cables, including live cables.
- Flexrods can be used to push a wide range of sondes up to 500’ (150m).
- For non-conductive pipes or conduits, the T1-640 can be connected to a FlexiTrace enables continuous locating and tracing of non-metallic ducts or pipes, for up to 260’ (80m).
- Signal clamps can be used to apply the T1 transmitter signal to a specific cable or pipe where a direct connection is not possible, for pipe or cable up to 220mm/8.5″ diameter without interrupting the supply.
- Direct connection, the most effective method for connecting to a valve, meter, junction box or other access point. Live plug and cable connectors can energise difficult to locate cables such as power cables from private properties to the main distribution cable in the street.
Safety Built-In
All SuperCAT4 + models come with a range of features designed to aid safe working practices.
Dynamic Overload Protection
High levels of electrical interference, as found around substations and near high-voltage transmission cables can overload sensitive electronics—Dynamic Overload Protection filters this interference out, enabling SuperCAT4+ to continue locating where other units struggle.
Dig more safely with StrikeAlert
StrikeAlert warns the user to the possible presence of shallow cables and utility lines in both Power and Active Line modes. Although work practices and guidelines insist power cables are buried below a certain depth, a common cause of cable strikes, damage and possible injuries are unexpectedly shallow cables.
Automatic Depth Display
Automatically measure and display the depth in Active Line, Sonde or CPS modes if the environmental conditions are suitable for an accurate reading.
Real Sound
The audio signals emitted by the SuperCAT4+ are derived from the signals detected. Radio, Power and Active signals can be easily distinguished from each other and background noise, identifying target utilities and aiding differentiation of closely co-located utilities.
SuperC.A.T4+ CPS and SuperC.A.T4+ S Cable Avoidance Tools (50Hz mains regions)
Metric Locator 10/SUPERCAT4+CPS50-M
Imperial Locator 10/SUPERCAT4+CPS50-I
SuperC.A.T4+ Transmitter
T1-640 Transmitter, with frequencies 640Hz, 8kHz, 33kHz; includes DC lead, earth stake, earth lead and magnet (D-Cell batteries only) 10/T1-SUPERCAT4+640
SuperC.A.T4+ CPS Locator and T1-640 Transmitter Kit (no bag)
CPS KIT3 – Metric Locator 10/SUPERCAT4+CPSKIT03
CPS KIT4 – Imperial Locator 10/SUPERCAT4+CPSKIT04
SuperC.A.T4+ CPS Locator and T1-640 Transmitter Kit with Soft Carry Bag
CPS KIT5 – Metric Locator 10/SUPERCAT4+CPSKIT05
CPS KIT6 – Imperial Locator 10/SUPERCAT4+CPSKIT06
Pipeline Kit
CPS Pipeline KIT11 – Metric Locator with T1-640 Transmitter, 4″ (100mm) Clamp and Soft Carry Bag Kit 10/SUPERCAT4+CPSKIT11
CPS Pipeline KIT12 Imperial Locator with T1-640 Transmitter, 4″ (100mm) Clamp and Soft Carry Bag Kit 10/SUPERCAT4+CPSKIT12
SuperC.A.T4+ S Locator
Metric Locator 10/SUPERCAT4+S50-M
Imperial Locator 10/SUPERCAT4+S50-I
SuperC.A.T4+ Transmitter
T1-640 Transmitter, with frequencies 640Hz, 8kHz, 33kHz; includes DC lead, earth stake, earth lead and magnet (D-Cell batteries only) 10/T1-SUPERCAT4+640
Locator and Standard Sonde Kit
S KIT1 – Metric Locator, Standard Sonde, M10 Rod Connector, Soft Carry Bag 10/SUPERCAT4+SKIT01
S KIT2 – Imperial Locator, Standard Sonde, M10 Rod Connector, Soft Carry Bag 10/SUPERCAT4+SKIT02
SuperC.A.T4+ Cable Avoidance Tool (50Hz mains regions)
Metric Locator 10/SUPERCAT4+50-M
Imperial Locator 10/SUPERCAT4+50-I
SuperC.A.T4+ Transmitter
T1-640 Transmitter, with frequencies 640Hz, 8kHz, 33kHz 10/T1-SUPERCAT4+640
T1-640/65 Transmitter, with frequencies 640Hz, 8kHz, 65kHz 10/T1-SUPERCAT4+640/65
T1-131 Transmitter, with frequencies 131kHz, 8kHz, 33kHz 10/T1-SUPERCAT4+131
SuperC.A.T4+ Locator and T1 640 Transmitter Kit (no bag)
SuperC.A.T4+ KIT1 – Metric Locator 10/SUPERCAT4+KIT01
SuperC.A.T4+ KIT2 – Imperial Locator 10/SUPERCAT4+KIT02
SuperC.A.T4+ Locator and T1-640 Transmitter Kit with Soft Carry Bag
SuperC.A.T4+ KIT7 – Metric Locator 10/SUPERCAT4+KIT07
SuperC.A.T4+ KIT8 – Imperial Locator 10/SUPERCAT4+KIT08
Builders Kit
Builders KIT3 – Metric Locator, T1-640 Transmitter, Standard Sonde, M10 Spring, 4″ (100mm) Clamp, Soft Carry Bag 10/BUILDERSKIT03
Builders KIT4 – Imperial Locator, T1-640 Transmitter, Standard Sonde, M10 Spring, 4″ (100mm) Clamp, Soft Carry Bag 10/BUILDERSKIT04
Electricians Kit
Electricians KIT1 – Metric Locator, T1-640/65 Transmitter, Live Plug Connector, 4″ (100mm) Clamp, Soft Carry Bag 10/ELECTKIT01
Electricians KIT2 – Imperial Locator, T1-640/65 Transmitter, Live Plug Connector, 4″ (100mm) Clamp, Soft Carry Bag 10/ELECTKIT02
Plumbers Kit
Plumbers KIT1 – Metric Locator, T1-640 Transmitter, Standard Sonde, M10 Spring, Soft Carry Bag 10/PLUMBKIT01
Plumbers KIT2 – Imperial Locator, T1-640 Transmitter, Standard Sonde, M10 Spring, Soft Carry Bag 10/PLUMBKIT02
SuperC.A.T4+ Accessories
Transmitter Connection Kit Contains Earth Lead, Earth Stake, Direct Connection Lead and Magnet 10/TX-CONNECTION-KIT
Earth Lead 10m and Magnet 10/TX-EARTHLEAD-KIT
Earth Lead 10m 10/TX-EARTHLEAD
Hi-strength magnet with M4 eyebolt 10/TX-MAGNET
Short Earth Stake 10/TX-EARTHSTAKE
Direct Connection Lead 10/TX-DC-LEAD
Direct Connection Lead with banana connectors, insulated plug/socket 10/TX-DC-LEAD-BAN
Live Plug Connector 10/TX-LPC-UK
Live Cable Connector (with Crocodile clips) 10/TX-LCC
2″ (50mm) Transmitter Clamp 10/TX-CLAMP-50
4″ (100mm) Transmitter Clamp 10/TX-CLAMP-100
5″ (130mm) Transmitter Clamp 10/TX-CLAMP-130
8.5” (215mm) Transmitter Clamp 10/TX-CLAMP-215
Signal Clamp Extension Rod 10/TX-CLAMP-EXTROD
Sewer Sonde 33kHz, depth up to 8m 10/SONDE-SEWER-33
Super Sonde 33kHz, depth up to 15m 10/SONDE-SUPER-33
4.5″ (115mm) Diameter Floats/Pair 10/SONDE-FLOATS
Standard Sonde 33kHz, depth up to 5m 10/SONDE-STD-33
S6 Microsonde Kit, incl. battery and case 10/SONDE-MICRO-33
Pack of 10 × Batteries for S6 Microsonde 10/SONDE-MICRO-BATPACK
S9 MiniSonde, incl. battery and case 10/SONDE-MINI-33
Pack of 10 × batteries for S9 MiniSonde 10/SONDE-MINI-BATPACK
S13 Sonde Kit (includes M10 Stud and Plain End Caps, two Batteries and Case) 10/SONDE-S13-33
Pack of ten spare Batteries for S13 Sonde 10/SONDE-S13-BATPACK
S18A Sonde 33kHz Kit with M10 Stud and Plain End Caps and two D1/3N Batteries 10/S18-33-KIT
S18A Sonde 33kHz with M10 Stud End Cap and one D1/3N battery 10/SONDE-S18A-33
S18A M10 Stud End Cap with one D1/3N Battery 10/S18-M10-ENDCAP
S18A Extended Plain Cap with one D1/3N Battery 10/S18-PLAINENDCAP
S18A Pack of 5 D1/3N Batteries 10/S18-BATTERY PACK
S18B Sonde 33kHz with Extended Aluminium End Cap for two AA Batteries (batteries included) 10/SONDE-S18B-33
S18B Sonde Aluminium AA Batteries End Cap (batteries included) 10/S18-AA-ENDCAP
Sonde Coupling M10F – M12F 02/SU1421N1
Spring Coupling M10 Male 10/SU0335
Pulling Eye 02/FR0819
Plastic or Cane Rod Connector, Male 02/SU0339
Wards Rod Connector, 3/4″ (19mm) x 10 BSW, Female 02/SU0341
Wards Rod Connector, 1/2″ (13mm) x 12 BSW, Female 02/SU0342
“Lockfast” Connector, 3/4″ (19mm) x 10 BSW 02/SU0676
FlexiTrace 50m (T1 powered pushrod transmitter) 10/TRACE50-GB
FlexiTrace 80m (T1 powered pushrod transmitter) 10/TRACE80-GB
4.5mm 50m Flexrod 10/FLEXRODF50-4.5
4.5mm 80m Flexrod 10/FLEXRODF80-4.5
6.7mm 50m Flexrod 10/FLEXRODF50-7
6.7mm 100m Flexrod 10/FLEXRODF100-7
6.7mm 150m Flexrod 10/FLEXRODF150-7
9mm 60m Flexrod 10/FLEXRODF60-9
9mm 120m Flexrod 10/FLEXRODF120-9
SuperCAT and T1 Carry Bag 10/SUPERCAT-T1-BAG
T1 Transmitter Bag 10/T1-BAG
Calibration Certificate, per unit (request with initial order only) 10/CALCERT
