Multi Gas Clip Simple Detector MGC-S

Code: MGC-S
  • Four gas monitor with IR Flammable sensor
  • Two-year life maintenance free
  • Diffusion model

In StockMake An Enquiry

Detects hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustible gases (LEL). The Multi Gas Clip Simple is a four gas detector with an infrared LEL sensor. There is no need for charging or calibration. Simple to maintain and easy to use. Just switch on the MGC-S and protect against toxic gases 24/7 for two full years.

Gas Clip Technologies’ continued refinement of advanced low-power photometric infrared technology for combustible gas measurement helps make gas detection simpler and safer than ever. The newest member of their gas detector family, the Multi Gas Clip Simple, features no charging ever and no calibrating necessary.

Features

  • Simple to use one-button operation – large, easy to read screen
  • Lightweight & durable – alligator clip clamps on tight
  • Two years run time and lifespan
  • Two-year warranty
  • No charging ever! No calibration is necessary! (Can be calibrated if required)
  • Works in oxygen-enriched and oxygen-deficient environments
  • Continuous 1-second data logging
  • Country of Origin USA
  • Compatible with MGC Simple Dock or MGC Simple Wall Mount Dock

Sensors

  • Infrared LEL sensor does not require oxygen to detect gas
  • Low maintenance cost – infrared LEL sensor is immune to H2S & silicone poison

Ranges

  • H2S 0-100 PPM (0.1 PPM increments)
  • CO 0-500 PPM (1 PPM increments)
  • Combustible (LEL) 0-100% LEL (0.1% increments)
  • O2 0-30% vol (0.1% increments)

Type

  • Sensor Type H2S, CO & O2. Plug-in electrochemical cell
  • Combustible (LEL). Plug-in infrared

Included

Detector, calibration cap, calibration certification and quick start guide

Spares & Accessories

MGC-S-CSK Confined Space Kit for MGC Simple & Simple Plus – Hard-sided carrying case with foam insert, 1′ sampling probe, air stone particulate filter, 10′ sampling hose, hand aspirator pump, 3′ calibration/test hose with quick connect, MGC Simple cal cap, 0.5lpm regulator & GCT IR Link Detector & gas sold separately
MGC-S-CSK-GAS

 

Confined Space Kit for MGC Simple & Simple Plus with 58L Quad Gas (25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL) Detector sold separately
P-FILTER-3 Air Stone Particulate Filters – 3 Pack
AL-CLIP Alligator Clip replacement (for use with all GCT detectors)
AL-CLIP SCREW Alligator Clip Screw replacement (for use with all GCT detectors)
MGC-S-BC Back Case for MGC Simple & MGC Simple Plus replacement (serial no. & certification label not included)
BUBBLE LABEL-MGC-S Bubble Label for MGC Simple replacement
BUBBLE LABEL-MGC-S-PLUS Bubble Label for MGC Simple Plus replacement
MGC-S-CALCAP Calibration Cap replacement (for use with MGC-S & MGC-S-PLUS)
HOSE-3 Calibration Hose – 3 ft Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm)
MGC-S-CASE SCREW Case Screw for MGC Simple & MGC Simple Plus replacement
MGC-S-X-FILTER-KIT External Dust Filter Kit for MGC Simple & MGC Simple Plus- External Dust Filter Cap plus 5 filters (for use with MGC Simple & Simple Plus only)
MGC-S-X-FILTER-10 External Dust Filters for MGC Simple & MGC Simple Plus replacements – 10 Pack (for use with MGC Simple & Simple Plus only)
MGC-S-FILTER-2 Filter Replacement Kit for MGC Simple & MGC Simple Plus – 2 Pack – Complete filter replacements (for use with MGC Simple & Simple Plus)
MGC-S-FILTER-10 Filter Replacement Kit for MGC Simple & MGC Simple Plus – 10 Pack – Complete filter replacements (for use with MGC Simple & Simple Plus)
MGC-S-HAK Hand Aspirator Kit for MGC Simple & MGC Simple Plus – Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (use with MGC Simple & Simple Plus)
MGC-S-LCD LCD Screen Kit for MGC Simple & MGC Simple Plus
REG-MANUAL Manual Regulator (non-dock use) use with all GCT detectors except MGC Pumps
MGC-S-PCB SCREW PCB Screw for MGC Simple replacement (for MGC Simple & Simple Plus only)
MGC-Q-58 Quad Gas Cylinder – contains 25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL (2.5% vol Methane) – Available in 58L or 116L
PROBE-1 Remote Sampling Probe – 1 ft.
PROBE-RF Remote Sampling Probe Filter & Gasket Replacement Set
MGC-WT Remote Sampling Probe In-line Water Trap Filter replacement

 

Enquire About This Product

Title Size
Multi Gas Clip Simple Datasheet 158 KB
Multi Gas Clip Simple Quick Start Guide 168 KB
Multi Gas Clip Simple Manual 333 KB

Additional information

Weight 0.190 kg

Specification

Size/ Weight 4.75” H x 2.75” W x 1.25” D (120.65 x 69.85 x 31.75 mm). 7.675 oz. (220.2 g)
Temperature -4˚ to +122˚F (-20˚ to +50˚C)
Humidity 5% to 95% RH (non-condensing)
Battery Life 730 days continuous (based on avg. of 1 minute of alarm/day)
Alarms Visual, vibrating & audible (minimum 95 dB)
Low, High, STEL, TWA & OL (Over Limit)
LEDs 4 Red alarm bar LEDs
Yellow back-light (activated on button press)
Red back-light (activated on alarm condition)
Yellow maintenance notification LED
Display High viewing angle alphanumeric Liquid Crystal Display (LCD)
Logs 50 Bump tests
50 Events
50 Calibrations
Continuous 1 second data logging (typical capacity > 2 months)
Tests Full function self-test upon activation
Sensors, battery and circuitry tests run continuously
Ratings Ingress Protection IP 68
Certifications
and
Approvals
CSA: C22.2 No.152-M1984; CSA16.70084100
ANSI/ISA 12.13.01-2000
Intrinsically Safe/Sécurité lntrinsèque
Class I, Division 1, Group A, B, C, and D, T4
Class I, Zone 0, AEx ia IIC T4 Ga
-20˚C < Ta < +50˚C; 4.2 Vdc
IECEx: IECEx CSA 16.0038
Ex ia IIC T4 Ga
IEC 60079-0:2011 Edition: 6.0
IEC 60079-11:2011 Edition: 6.0
-20˚C < Ta < +50˚C; 4.2 Vdc
ATEX: SIRA 16ATEX2288
Ex ia IIC T4 Ga
EN 60079-0:2012/A11:2013
EN 60079-11:2012

Enquire About This Product