The Multi Gas Clip is a four gas detector with a two-month run time and an infrared LEL sensor. Detects hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) & combustible gases (LEL).
The new MGC can go a full two months without a charge, even without ever having to be turned off. Shut down the detector nightly, and the battery can last up to four months.
The extended battery life is achieved using low-power photometric technology to detect combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts.
The Multi Gas Clip also eliminates the need to calibrate portable gas detectors frequently. It can go 12 months without being calibrated. That saves time and increases efficiency.
Features
- Simple to use one-button operation – large, easy to read screen
- Lightweight & durable – alligator clip clamps on tight
- Two-month battery life (continuous run time)
- One year calibration cycle
- Will work in inert environments, no need for oxygen
- Bump/Calibration reminders
- Docking station compatible
- Programmable user ID
- Warranty 2 years
- Manufacturer Gas Clip Technologies
- Country of Origin USA
Sensors
- Infrared LEL sensor does not require oxygen to detect gas
- Low maintenance cost – infrared LEL sensor is immune to poisons
Ranges
- H2S 0-100 PPM (0.1 PPM increments)
- CO 0-500 PPM (1 PPM increments)
- Combustible (LEL) 0-100% LEL (0.1% increments)
- O2 0-30% vol (0.1% increments)
Type
- Sensor Type H2S, CO & O2. Plug-in electrochemical cell
- Combustible (LEL). Plug-in infrared
Included
Detector, charger, calibration cap, calibration certification and quick start guide
Accessories & Spares
| GCT-IR-LINK
|
GCT IR Link communication module with USB cable (for use with all GCT detectors)
|
| GCT-IR-CABLE
|
GCT IR Link USB Cable replacement
|
| P-FILTER-3 | Air Stone Particulate Filters – 3 Pack |
| AL-CLIP | Alligator Clip replacement (for use with all GCT detectors) |
| AL-CLIP SCREW | Alligator Clip Screw replacement (for use with all GCT detectors) |
| MGC-BC | Back Case for MGC Infrared & MGC Pellistor replacement (serial no. & certification label not included) |
| BUBBLE LABEL-MGC | Bubble Label for MGC Infrared replacement |
| MGC-CALCAP | Calibration Cap replacement (for use with MGC Infrared & MGC Pellistor) |
| HOSE-3 | Calibration Hose – 3 ft Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm) |
| MGC-CASE SCREW | Case Screw for MGC Infrared & MGC Pellistor replacement |
| MGC-X-FILTER-KIT | External Dust Filter Kit for MGC Infrared & Pellistor – Dust Filter Cap + 5 filters |
| MGC-X-FILTER-10 | External Dust Filters for MGC Infrared & Pellistor replacements – 10 Pack |
| FILTER-10 | Filter replacements – 10 Pack (for use with SGC, SGC PLUS, MGC IR & Pellistor) |
| FILTER-50 | Filter replacements – 50 Pack (for use with SGC, SGC PLUS, MGC IR & Pellistor) |
| MGC-FC | Front Case for MGC Infrared & MGC Pellistor replacement (front case only – order bubble label, filters & gaskets separately) |
| MGC-GSKT-10
|
Gasket for MGC replacements (Thin) – 10 Pack (for use with with MGC – O2 & Dual Tox sensors and with MGC-P – O2, Dual Tox & Pellistor sensors) |
| MGC-GSKT-50
|
Gasket for MGC replacements (Thin) – 50 Pack (for use with with MGC O2 & Dual Tox sensors and with MGC-P O2, Dual Tox & Pellistor sensors) |
| MGC-GSKT-LEL-10 | Gasket for MGC IR replacements – 10 Pack (use with MGC IR LEL sensors only) |
| MGC-GSKT-LEL-50 | Gasket for MGC IR replacements – 50 Pack (use with MGC IR LEL sensors only) |
| MGC-HAK | Hand Aspirator Kit for MGC Infrared & MGC Pellistor – Probe, Stone Filter, Sampling Hose, Bulb & Calibration Cap (for use with MGC IR & Pellistor only) |
| MGC-LCD | LCD Screen Kit for MGC Infrared & MGC Pellistor |
| REG-MANUAL | Manual Regulator (non-dock use) use with all GCT detectors except MGC Pump |
| MGC-CHARGER | MGC Charger replacement 110v AC Adapter (use with all MGC & MGC Pump) |
| MGC-CHARGING-STATION | MGC Charging Station – 5 bay charge station (use with MGC IR & Pellistor) |
| MGC-CHARGER-MULTI | MGC Multi Charger – 5 cable wall charger (use with all MGC & MGC Pump) |
| MGC-CHARGER-V | MGC Vehicle Charger – 12v DC Adapter (use with all MGC & MGC Pump) |
| MGC-PCB SCREW | PCB Screw for MGC Infrared & MGC Pellistor replacement (for MGC & MGC-P) |
| PROBE-1 | Remote Sampling Probe |
| PROBE-RF | Remote Sampling Probe Filter & Gasket Replacement Set |
| MGC-WT | Remote Sampling Probe In-line Water Trap Filter replacement |
| MGC-SE-4DT | Sensor – H2S & CO replacement (Dual-Tox) for all MGCs & MGC Pumps |
| MGC-SE-LEL-IR | Sensor – LEL replacement (infrared) for MGC Infrared and MGC Pump Infrared |
| MGC-SE-O2 | Sensor – O2 replacement for MGC Infrared & MGC Pellistor |
