The Multi Gas Clip Pump is a 4 Gas detector with a 52 hour run time, internal pump and infrared LEL sensor. Detects hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) & combustible gases (LEL).
There is no need to charge the detector twice daily; the MGC Pump uses low-power photometric infrared technology to detect combustible gases (LEL) rather than old pellistor technology. The MGC Pump uses an IR source which conserves power and helps the battery last.
The Multi Gas Clip IR Pump is also designed for comfort. The reduced, sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one-button design and the largest LCD screen in the industry, so it’s easy to read.
The MGC Pump can go 12 months without being calibrated.
Features
- 52 hours continuously without a charge
- Lightweight & durable – alligator clip clamps on tight
- Will work in inert environments, no need for oxygen
- A powerful but quiet pump draws from up to 75 feet (23 m)
- Stainless steel gas inlet
- Bump/Calibration reminders
- Docking station compatible
- Programmable user ID
- Warranty 2 years
- Manufacturer Gas Clip Technologies
- Country of Origin USA
Sensors
- Infrared LEL sensor does not require oxygen to detect gas
- Low maintenance cost – infrared LEL sensor is immune to poisons such as silicone or H2S.
Ranges
- H2S 0-100 PPM (0.1 PPM increments)
- CO 0-500 PPM (1 PPM increments)
- Combustible (LEL) 0-100% LEL (0.1% increments)
- O2 0-30% vol (0.1% increments)
Type
- Sensor Type H2S, CO & O2. Plug-in electrochemical cell
- Combustible (LEL). Plug-in infrared
Included
Detector, charger, ten-foot sampling hose, stainless steel diffusion stone, ten additional filters (five hydrophobic and five particulate), calibration certificate and quick start guide.
Accessories & Spares
| AL-CLIP | Alligator Clip replacement (for use with all GCT detectors) |
| AL-CLIP SCREW | Alligator Clip Screw replacement (for use with all GCT detectors) |
| MGC-PUMP-BC | Back Case for MGC Pump Infrared & MGC Pump Pellistor replacement (serial no. & certification label not included) |
| BUBBLE LABEL-MGC-IR-PUMP | Bubble Label for MGC Pump Infrared replacement |
| HOSE-3 | Calibration Hose – 3 ft Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm) |
| REG-DF | Demand Flow Regulator |
|
MGC-PUMP-FC |
Front Case for MGC Pump Infrared & MGC Pump Pellistor replacement (front case only – order bubble label, filters & gaskets separately) |
| MGC-PUMP-GI | Gas Inlet for MGC Pump Infrared & MGC Pump Pellistor replacement |
| MGC-PUMP-H-FILTER-10 | Hydrophobic Filter replacement (Thin) – 10 Pack (for all MGC Pumps) |
| MGC-PUMP-H-FILTER-50 | Hydrophobic Filter replacement (Thin) – 50 Pack (for all MGC Pumps) |
| MGC-PUMP-LCD | LCD Screen Kit for MGC Pump Infrared & MGC Pump Pellistor |
| MGC-CHARGER
|
MGC Charger replacement – 110v AC Adapter (for use with MGC Infrared & Pellistor and MGC Pump Infrared & Pellistor) |
| MGC-CHARGER-MULTI
|
MGC Multi Charger – 5 cable wall charger (for use with MGC Infrared & Pellistor and MGC Pump Infrared & Pellistor) |
| MGC-PUMP-CHARGING-STATION
|
MGC Pump Charging Station – 5 bay charge station (for use with MGC Pump Infrared & MGC Pump Pellistor) |
| MGC-CHARGER-V
|
MGC Vehicle Charger – 12v DC Adapter (for use with MGC Infrared & Pellistor and MGC Pump Infrared & Pellistor) |
| P-FILTER-STEEL | Particulate Diffusion Steel Stone Filter for sampling hose |
| MGC-PUMP-P-FILTER-10 | Particulate Filter replacement (Thick) – 10 Pack (for all MGC Pump gas inlets) |
| MGC-PUMP-P-FILTER-50 | Particulate Filter replacement (Thick) – 50 Pack (for all MGC Pump gas inlets) |
| MGC-PUMP-PCB SCREW | PCB Screw for MGC Pump replacement (for MGC Pump Infrared & Pellistor) |
| MGC-Q-58 | Quad Gas Cylinder – contains 25 ppm H2S, 100 ppm CO, 18% O2 & 50% LEL (2.5% vol Methane) – Available in 58L or 116L |
| MGC-PUMP-QD | Quick Disconnect for use with MGC Pump Infrared & Pellistor gas inlets |
| PROBE-1 | Remote Sampling Probe |
| PROBE-RF | Remote Sampling Probe Filter & Gasket Replacement Set |
| MGC-WT | Remote Sampling Probe In-line Water Trap Filter replacement |
| HOSE-FT | Sampling Hose (order by the foot) Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm) |
| HOSE-CLIP | Sampling Hose Clip |
| HOSE-CLIP-KIT | Sampling Hose Clip with 3 ft Hose Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm) |
| HOSE-10 | Sampling Hose replacement – 10 ft Tygon ID-1/8″ (3.18mm), OD-1/4″ (6.35 mm) |
| MGC-SE-4DT | Sensor – H2S & CO replacement (Dual-Tox) for all MGCs & MGC Pumps |
| MGC-SE-LEL-IR | Sensor – LEL replacement (infrared) for MGC Infrared and MGC Pump Infrared |
| MGC-SE-O2-A | Sensor – O2 replacement for MGC Pump Infrared & MGC Pump Pellistor only |
| PROBE-TS | Telescoping Sampling Probe – 6 ft fully extended |
| MGC-PUMP-TSP-CASE | Neoprene Case for MGC Pump and Telescoping Sampling Probe |
