| ALARMLINE II INSTALLATION ACCESSORIES |
| Alarmline Specialist Application Accessories |
1-B6782-032 | Cable collector, stainless steel Designed to be fixed to the roof of a floating roof storage tank for collecting the retractable cable (B6782-032). The cable collector rises and falls with the movement of the roof, uncoiling the cable when the roof lowers and collecting the cable when the roof rises. The collector is supplied with drainage holes. Material: Stainless Steel 304 Dimensions: diameter 624mm, height 505mm |
1-B6782-170 | Retractable cable – 30m Used in conjunction with the cable collector (B6782-032) retractable cables are designed to provide electrical connection from tank roof to tank top on floating roof tanks, reducing the risk of cable being caught and snapped during the normal rising and falling movement of the tank roof. The cable contains four cores with an overall diameter of 10mm |
1-53836-K247EX | Automatic cable reeler – Stainless Steel c/w Stainless steel junction box Designed to be fixed to the top of a floating roof tank to enable a connection between the site wiring and the floating roof. The cable reeler feeds cable in and out as the floating roof moves up and down. This allows control over the cable and electrical connection without the risk of entanglement. ATEX approved to II 1/3G Ex ia IIC T6 Ambient operating temperature -40 to 60 Deg C |
1-B6782-189 | Ex Junction box c/w two cable glands For use with all Alarmline Analogue and Digital sensor cables when installed in hazardous areas. EX e IP66 junction box suitable for zone 1, 2, 21 and 22. 2 x IP66 EX d brass cable glands. Contains 6 x 2.5mm terminals and 1 x 4mm earth terminal. Commonly used on the top of floating roof tanks. Dimensions (mm): 120w x 120h x 73.5d |
1-B6782-190 | Ex Junction box c/w three cable glands For use with all Alarmline Analogue and Digital sensor cables when installed in hazardous areas. EX e IP66 junction box suitable for zone 1, 2, 21 and 22. 2 x IP66 EX d brass cable glands. Contains 4 x 2.5mm terminals and 1 x 4mm earth terminal. Commonly used on the roof of floating roof tanks. Dimensions (mm): 120w x 120h x 73.5d |
ACA-JBW | Junction Box, IP65/66 w/ Cable Glands & Terminals Polycarbonate suitable for terminating and jointing of Alarmline II sensor cables Contains 5 x terminal connectors, 2 x M16 cable glands Dimensions (mm): 94 x 94 x 57 |
1-K82024 | In-Line jointing kit A selection of heat shrinkable sleeving to be used when joining two sections of Alarmline sensor cable together. The sleeving is placed over the soldered joints of the two connected cables to protect and insulate the joints from damage. In-Line, jointing kits are supplied in packs of 10. |
| Alarmline Analogue and Digital Sensor Cable Fixings |
ACA-CE02-025 | “Edge” clip, (Spring Steel) 2-3mm (1/16″) – Pack of 25 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 2-3mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE02-100 | “Edge” clip, (Spring Steel) 2-3mm (1/16″) – Pack of 100 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 2-3mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE03-025 | “Edge” clip, (Spring Steel) 3-8mm (2/16″) – Pack of 25 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 3-8mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE03-100 | “Edge” clip, (Spring Steel) 3-8mm (2/16″) – Pack of 100 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 3-8mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE08-025 | “Edge” clip, (Spring Steel) 8-14mm (5/16″) – Pack of 25 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 8-14mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE08-100 | “Edge” clip, (Spring Steel) 8-14mm (5/16″) – Pack of 100 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 8-14mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE14-025 | “Edge” clip, (Spring Steel) 14-20mm (9/16″) – Pack of 25 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 14-20mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CE14-100 | “Edge” clip, (Spring Steel) 14-20mm (9/16″) – Pack of 100 Spring steel clip used for fixing Alarmline II sensor cables to girders, angle bars, purlings etc. Simple installation, clip is hammered on the mounting edge with no drilling or screwing required Distance from mounting edge to sensor cable approx. 15mm, this distance can be extended by adding the ACA-BI20-XXX Bracket “I” Suitable for edges with a web thickness of 14-20mm Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CT-025 | ‘T’ Clip – pack of 25 Suitable for all Alarmline sensor cables excluding the Stainless Steel braided. Used to install sensor cables on to flat surfaces that are suitable for drilling i.e. wood and concrete. Distance from mounting surface to sensor cable: 25mm Material: Low density Polyethylene resin Peak melting temperature 120°C Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CT-100 | ‘T’ clip – pack of 100 Suitable for all Alarmline sensor cables excluding the Stainless Steel braided. Used to install sensor cables on to flat surfaces that are suitable for drilling i.e. wood and concrete. Distance from mounting surface to sensor cable: 25mm Material: Low density Polyethylene resin Peak melting temperature 120°C Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-CP-025 | “P” Clip c/w Silicon Sleeve – Pack of 25 Suitable for mounting all types of Alarmline II sensor cables. The “P” clip can also be use to secure the Alarmline sensor cable to other metallic cable clips. Dimensions (mm): 12w x 16h x 27d |
ACA-CP-100 | “P” Clip c/w Silicon Sleeve – Pack of 100 Suitable for mounting all types of Alarmline II sensor cables. The “P” clip can also be use to secure the Alarmline sensor cable to other metallic cable clips. Dimensions (mm): 12w x 16h x 27d |
ACA-CPSS-025 | “P” Clip Stainless steel c/w Silicon Sleeve – Pack of 25 Suitable for mounting all types of Alarmline II sensor cables. The “P” clip can also be use to secure the Alarmline sensor cable to other metallic cable clips. Material: Stainless steel Dimensions (mm): 12w x 16h x 27d |
ACA-CPSS-100 | “P” Clip Stainless steel c/w Silicon Sleeve – Pack of 100 Suitable for mounting all types of Alarmline II sensor cables. The “P” clip can also be use to secure the Alarmline sensor cable to other metallic cable clips. Material: Stainless steel Dimensions (mm): 12w x 16h x 27d |
ACA-B706-025 | “7” Bracket (Pipe Clip), 60mm (2.4″) (Zintec) c/w Silicon Sleeve – Pack of 25 Suitable fixing clip for hanging Alarmline II sensor cables below pipes. Simple installation requires no drilling, clip is secured to the pipe using a suitable cable tie. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-B706-100 | “7” Bracket (Pipe Clip), 60mm (2.4″) (Zintec) c/w Silicon Sleeve – Pack of 100 Suitable fixing clip for hanging Alarmline II sensor cables below pipes. Simple installation requires no drilling, clip is secured to the pipe using a suitable cable tie. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-B706SS-025 | Pipe clip – Stainless steel c/w Silicon sleeve – Pack of 25 Suitable fixing clip for hanging Alarmline II sensor cables below pipes. Simple installation requires no drilling, clip is secured to the pipe using a suitable cable tie. Material: Stainless steel Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-B706SS-100 | Pipe clip – Stainless steel c/w Silicon sleeve – Pack of 100 Suitable fixing clip for hanging Alarmline II sensor cables below pipes. Simple installation requires no drilling, clip is secured to the pipe using a suitable cable tie. Material: Stainless steel Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BVSS-025 | “V” Bracket, (Stainless Steel) c/w Silicon Sleeve – Pack of 25 specifically designed to fit Admiralty standard cable tray. Allows sensor to be fixed to the underside of the cable tray. Material: Stainless Steel Requires suitablecable tie (ACA-TW series), these are ordered separately. Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BVSS-100 | “V” Bracket, (Stainless Steel) c/w Silicon Sleeve – Pack of 100 specifically designed to fit Admiralty standard cable tray. Allows sensor to be fixed to the underside of the cable tray. Material: Stainless Steel Requires suitablecable tie (ACA-TW series), these are ordered separately. Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BU06-025 | “U” Bracket, 60mm (2.4″) (Zintec) c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BU06-100 | “U” Bracket, 60mm (2.4″) (Zintec) c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BU06SS-025 | “U” Bracket, 60mm (2.4″) Stainless steel c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless steel Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BU06SS-100 | “U” Bracket, 60mm (2.4″) Stainless steel c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless steel Dimensions (mm): 20w x 60h x 50d Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL05-025 | “L” Bracket, 50mm (2″) (Zintec) c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 50h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL05-100 | “L” Bracket, 50mm (2″) (Zintec) c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 50h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL05SS-025 | “L” Bracket, 50mm (2″) Stainless Steel c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless steel Dimensions (mm): 20w x 50h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL05SS-100 | “L” Bracket, 50mm (2″) Stainless Steel c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless steel Dimensions (mm): 20w x 50h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL10-025 | “L” Bracket, 100mm (3.9″) (Zintec) c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 100h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL10-100 | “L” Bracket, 100mm (3.9″) (Zintec) c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 100h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL10SS-025 | “L” Bracket, 100mm (3.9″) Stainless Steel c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless Steel Dimensions (mm): 20w x 100h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL10SS-100 | “L” Bracket, 100mm (3.9″) Stainless Steel c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless Steel Dimensions (mm): 20w x 100h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL20-025 | “L” Bracket, 200mm (7.9″) (Zintec) c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 200h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL20-100 | “L” Bracket, 200mm (7.9″) (Zintec) c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Zintec (steel coated with Zinc plating) Dimensions (mm): 20w x 200h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL20SS-025 | “L” Bracket, 200mm (7.9″) Stainless Steel c/w Silicon Sleeve – Pack of 25 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless Steel Dimensions (mm): 20w x 200h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BL20SS-100 | “L” Bracket, 200mm (7.9″) Stainless Steel c/w Silicon Sleeve – Pack of 100 Suitable for mounting Alarmline II sensor cables to any flat surface which can be drilled or screwed into. Material: Stainless Steel Dimensions (mm): 20w x 200h Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BI20-025 | Bracket “I”, 200mm (7.9″) (Zintec) c/w Silicon sleeve – Pack of 25 The “I” bracket can be bolted on to our range of Zintec or Stainless steel clips to extend the distance of the sensor cable from the mounting surface. Length: 200mm, Material: Zintec (steel coated with Zinc plating) Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BI20-100 | Bracket “I”, 200mm (7.9″) (Zintec) c/w Silicon sleeve – Pack of 100 The “I” bracket can be bolted on to our range of Zintec or Stainless steel clips to extend the distance of the sensor cable from the mounting surface. Length: 200mm, Material: Zintec (steel coated with Zinc plating) Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BI20SS-025 | Bracket “I”, 200mm (7.9″) Stainless Steel c/w Silicon sleeve – Pack of 25 The “I” bracket can be bolted on to our range of Zintec or Stainless steel clips to extend the distance of the sensor cable from the mounting surface. Length: 200mm, Material: Stainless steel Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-BI20SS-100 | Bracket “I”, 200mm (7.9″) Stainless Steel c/w Silicon sleeve – Pack of 100 The “I” bracket can be bolted on to our range of Zintec or Stainless steel clips to extend the distance of the sensor cable from the mounting surface. Length: 200mm, Material: Stainless steel Note: Suitable cable tie will be required for securing sensor cable to clips, see available cable tie options ACA-TW series. |
ACA-RS-025 | Silicon sleeve – Pack of 25 Square patch of silicon which is designed for use with metallic fixing clips. The Silicon sleeve is designed to wrap around the Alarmline II sensor cable before securing it to the fixing clip, the silicon sleeve prevents the sensor cable from damage and also insulates it from the clip Dimensions (mm): 25 x 25 x 1mm thickness |
ACA-RS-100 | Silicon sleeve – Pack of 100 Square patch of silicon which is designed for use with metallic fixing clips. The Silicon sleeve is designed to wrap around the Alarmline II sensor cable before securing it to the fixing clip, the silicon sleeve prevents the sensor cable from damage and also insulates it from the clip Dimensions (mm): 25 x 25 x 1mm thickness |
ACA-TW11W-025 | Tie Wrap (PA66) 110°C (230°F) – Pack of 25 UV stabilised tie wrap for securing Alarmine II sensor cable to fixing clips Material: Polyamide 66 Operating temperature: 110 Deg C (230 Deg F) Suitable for indoor or outdoor installation Length: 100mm Colour: Black must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TW11W-100 | Tie Wrap (PA66) 110°C (230°F) – Pack of 100 UV stabilised tie wrap for securing Alarmine II sensor cable to fixing clips Material: Polyamide 66 Operating temperature: 110 Deg C (230 Deg F) Suitable for indoor or outdoor installation Length: 100mm Colour: Black must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TW17-025 | Tie Wrap (PA66) 170°C (338°F) – Pack of 25 High corrossion resistane and strength tie wrap for securing Alarmine II sensor cable to fixing clips Material: ETFE Suitable for indoor or outdoor installation Operating temperature: 170 Deg C (338 Deg F) Length: 100mm Colour: Blue must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TW17-100 | Tie Wrap (PA66) 170°C (338°F) – Pack of 100 High corrossion resistane and strength tie wrap for securing Alarmine II sensor cable to fixing clips Material: ETFE Suitable for indoor or outdoor installation Operating temperature: 170 Deg C (338 Deg F) Length: 100mm Colour: Blue must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TWSS-025 | Tie Wrap Stainless Steel – Pack of 25 Stainless steel tie wrap for securing Alarmine II sensor cable Suitable for indoor or outdoor installation Length: 125mm must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TWSS-100 | Tie Wrap Stainless Steel – Pack of 100 Stainless steel tie wrap for securing Alarmine II sensor cable Suitable for indoor or outdoor installation Length: 125mm must be used with silicon sleeve check clip specification, if silicon sleeve is not included with the clip it will need to be ordered seperately ACA-RS-XXX |
ACA-TWT | Stainless Steel Tie Wrap Tool Tool for the installation of stainless steel cable ties The tool has an adjustable tensioner to ensure that cable ties are not overtightened potentially damaging the sensor cable |