Kidde AirSense Stratos ModuLaser is a scalable aspirating smoke detection solution that makes installation easier, maintenance quicker, and enables applications beyond traditional air sampling detectors. Two basic module types comprise the ModuLaser solution: a display module and a detector module. Each detector module can accommodate up to 250 meters of combined sampling pipe. Display modules and detector modules communicate by RS-485 interconnections.
Display modules are available in three configurations: Standard with a TFT colour display, status LEDs, and navigation buttons; Minimum with only status LEDs; and Command, which is similar to standard but with the added functionality to control various modules over SenseNET. The Minimum and Standard Display Modules can each support up to 8 detector modules, while the Command Display Module can support up to 127 modules across the SenetNET network.
Detector module
The Detector Module is a fully self-contained unit that aspirates the sampled air from the protected area, analyses it, and, based on ClassiFire, determines whether a pre-alarm or alarm should be raised if smoke particles are present. If an alarm or fault condition occurs, the unit will activate the corresponding local relay output, subject to relay programming. Simultaneously, the alarm or fault condition would also be reported to the Display Module to which the Detector Module is connected.
Due to the modular nature of the ModuLaser, maintenance (e.g., routine filter replacement) can be performed module-by-module rather than on the entire system. This, in turn, reduces the risk in the unprotected area during the maintenance period, as only one sampling pipe (in the protected zone) would be affected at a time.
Perfect solution
Thanks to advanced features that make it virtually impervious to dust and dirt, ModuLaser is ideal for use in hostile environments where other smoke detectors would be disabled. Forward-scattering optical detection provides early warning without the nuisance alarms often associated with high-sensitivity smoke detection, while exclusive environmental compensation technology adds a high degree of reliability to an already reliable detection solution.
Details
- Modular Design: Separate, centrally controllable detector modules enable efficient piping and discrete zones with no overlap.
- Zoned aspirating smoke detection: Individual detector modules provide detection for individual areas or zones. Specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module.
- Simplified installation: Ingenious docking station design allows detectors to be easily connected as a group. Sensitive electronics are easily removed to prevent damage during the first-fix installation. Aspirating pipework and cable entries can be easily made at either the top or the bottom of the unit.
- Intuitive user interface: Bright, easy-to-see colour TFT display and universal navigation and control buttons take the guesswork out of programming and diagnostics.
- Easy pipe connection: The quick-fit pipe adaptor system locks down securely while leaving plenty of room for easy connection and removal.
- Quick location of smoke: Each detector module is self-contained, which means no delays in determining in which zone (sampling pipe) smoke is present.
Order Information
| 9-30780 | Modulaser Minimum Display module. Provides indication and Laptop programming for up to 8 Modulaser detectors, LED status indication of fire fault and OK, 2 programmable outputs and 1 fixed Fault output for interfacing to other fire control equipment. 2 programmable inputs. Requires an external 24VDC supply. Dimensions mm: 110.5w x 300h x 133.5d. Can support up to 4 Modulaser detectors (9-30782) as a Cluster and up to 8 Modulaser detectors as a distributed cluster |
| 9-30781 | Modulaser Standard Display Module. Provides indication and programming for up to 8 Modulaser detectors. Colour TFT provides status indication and full programming of connected modules. 2 programmable outputs and 1 fixed Fault output for interfacing to other fire control equipment. 2 programmable inputs. Requires an external 24VDC supply. Dimensions mm: 110.5w x 300h x 133.5d. Can support up to 4 Modulaser detectors (9-30782) as a Cluster and up to 8 Modulaser detectors as a distributed cluster |
| 9-30782 | Modulaser Command Module. Provides a single location for display, control, and interfacing for networks of up to 127 Modules. The Command module allows global programming of all detector functions simultaneously. Colour TFT and LED status indications. Requires an external 24VDC supply. Compatible with ModuLaser HSSD 2 and Micra 25 & 100 units Dimensions mm: 110.5w x 300h x 133.5d |
| 9-30783 | Modulaser detector module. Single pipe aspirating smoke detector with a sensitivity scale ranging from 0.003 – 25% obs/m. Classifire 3D® Artificial Intelligence automatically adjusts sensitivity with no external input. Laser Dust Discrimination (LDDTM) makes this product suitable for a wide range of environments. 3 programmable outputs for interfacing to other fire control equipment. 2 programmable inputs. Requires an external 24VDC supply. Maximum pipework length: 250m. Combined No. of Sample holes: Class A – 20 Sampling holes, Class B – 40 Sampling holes, C – 50 Sampling holes Dimensions mm: 110.5w x 300h x 133.5d. Must be used in conjunction with a ModuLaser Display module (9-30780 or 9-30781) |
| Filters | |
| 9-30699N | Individual HSSD2/ModuLaser A single cartridge-type filter for use with all variants of the Stratos HSSD2 or ModuLaser Aspirating Smoke Detection units. One filter required per unit. |
| 9-30699N-P | HSSD2/ModuLaser filter pack A pack of 6 cartridge-type filters for use with all variants of the Stratos HSSD2 or ModuLaser Aspirating Smoke Detection units. One filter required per unit. |
| Spares | |
| 9-30790 | ModuLaser spare backplane Replacement backplane for ModuLaser Detector or display Modules. |
| 9-30791-1 | ModuLaser spare detector cover Replacement detector cover for ModuLaser Aspirating Smoke Detector. Blue |
| 9-30792 | ModuLaser spare display cover Replacement cover for ModulLaser standard display or Command modules. |
| 9-30793 | ModuLaser spare display cover Replacement cover for the ModulLaser minimum display module. |
| 9-30794 | Spare gromets Pack The replacement grommet pack for all ModuLaser units includes 4 large and 5 small grommets. |
| 9-30797 | Modulaser, Accessory pack A pack containing replacement connectors, end-of-line resistors, ribbon cable and interconnectors. |
