Freedom 5000 Toxic Gas Detector Transmitter

Code: Freedom 5000
  • Toxic gas detector
  • Simple to use
  • Proven in the field, installed globally

In StockMake An Enquiry

The loop-powered Freedom 5000 transmitters provide a 4-20mA analogue output for the detection of Oxygen, Hydrogen, and Toxic gases. Gas readings can also be viewed locally on the TX display. Teledyne’s smart sensors transfer data such as gas type, range, and calibration information for automatic configuration.  A missing sensor indicator alerts if there is no sensor or if the sensor is not properly connected.

If used for all toxic gas detection personnel benefit from a standard user interface, minimising training and enabling a common mode of operation across a plant.

A built-in lithium battery keeps the sensor “hot,” which eliminates the need for sensor warm-up time. An E-connector means no pin alignments and makes sensor replacement fast and easy.

The unique electrical design prevents false alarms from RFI/EMI sources. The transmitter can be mounted directly to a rigid conduit and is available with several optional adapters including wall/surface mount and a special “L” shaped bracket to allow mounting on top of flat surfaces such as gas cabinets.

Freedom 5000 transmitters are available with quick connect 1/4 turn sample draw and (flat or round) duct mount adapters. The sensor can be remotely mounted from the transmitter, up to 50 feet with or without conduit. A standard option allows separation of 3 feet, ideal for placing the sensor near ground level while keeping the display at eye level. This option is also available in a flexible conduit.

Calibration is non-intrusive, performed by touching a magnet to the “Z” (zero), “S” (span), and up and down arrow markings on the enclosure. A programmable local inhibit feature and standard local display allows one-person calibration.

Universal electronics are in all transmitters, reducing the need to hold quantities of spares allowing operation and maintenance to be streamlined.

  • Smart sensor technology permits sensor removal for remote calibration
  • Rock-solid sensor technology, no drifting or interference from other gases
  • Built-in calibration factor shows remaining sensor life
  • Corrosion-resistant plastic housing with conformal coated internal circuitry
  • Output 4-20mA ensures compatibility with controllers
  • Power 10- 28 VDC, 2-wire loop power, 0.5 watts at 24 VDC
  • Operating temperature -40° to 60°C
  • Intrinsically safe
  • Option of 5600 transmitters adds relays which can activate on rising or falling gas concentrations
  • Approvals ATEX and CSA
  • Previously by Scott Safety

Enquire About This Product

Title Size
Freedom Series Brochure 218 KB
F5000 Manual 7 MB

Additional information

Weight0.09 kg

Ordering Information

Accessories & Spare Parts

Batteries, Backups, Chargers, & Power Supplies

096-0719 24VDC Power Supply /Battery Backup

Remote Sensor End Caps & Accessories

074-0305 1/4 Turn Rain Shield
096-1943 Sensor Rain Shield/Calibration Adaptor (uses SS End Cap 073-0165) Not for use with Rock Solid Sensors
096-1944 FlowCell (old-style- fits over SS End Cap)
096-2101 1/4 Turn Calibration Adaptor
096-2102 1/4 Turn PVC Flowcell. Sold for transmitters equipped with remote sensors only
096-2105 1/4 Turn Sensor End Cap
096-2142 Condensing RH Humishield End Cap
096-2273 1/4 Turn End Cap for ROCK SOLID Sensor
096-2276 Condensing RH Humishield End Cap for ROCK SOLID sensor
096-2741 5600 Hand-Held Display Assembly

Integral 5000 Endcaps & Adapters

073-0165 End Cap, Stainless Steel. Sold for remote sensors only
073-0210 Stainless Steel End Cap for ROCK SOLID. Sold for remote sensors only
074-0305 1/4 Turn Rain Shield
074-0357 1/4 Turn Sensor (NORYL) End Cap. Sold for Freedom 5000 transmitters equipped with INTEGRAL sensors only
074-0389 1/4 Turn (NORYL) End Cap for ROCK SOLID Sensor. Freedom 5000 transmitters INTEGRAL sensors only
096-1943 Rainshield/Cal Adaptor for use with stainless steel endcap # 073-0165 – allows remote gassing of sensor. Remote sensors
096-1944 Flowcell for use with stainless steel endcap. Sold for remote sensors only
096-2101 1/4 Turn Calibration Adaptor
096-2102 1/4 Turn PVC Flowcell. Sold for transmitters equipped with remote sensors only
096-2105 1/4 Remote Sensor PVC End-Cap Sold for remote Freedom 5000 sensors only
096-2669 1/4 Turn Noryl Flowcell. Sold for transmitters equipped with INTEGRAL sensors only
096-2673 End Cap (Noryl) for Condensing RH Humishield. Sold for transmitters equipped with INTEGRAL sensors only
096-2674 End Cap (Noryl) for Condensing RH Humishield and ROCK SOLID sensor. Transmitters with INTEGRAL sensors

Filters & Membranes

096-2104 Dust Filter (H2S, O2, & CO only) Bag of 10
074-0331 4600 Teflon Sensor Spacer

Housings Enclosures

096-2671 Enclosure with remote sensor fitting – does not include cable assembly
096-2670 Enclosure with sensor housing

Installation Accessories

096-2618 Mounting Plate, Wall/Surface

Misc Spare Parts

009-0039 Sensor housing o-ring
096-2002 Sensor Housing Test tool
093-0097 E-Connector
096-2776 SS TAG (4 Lines with 15 characters each max)
069-0061 Remote Sensor cable
077-0120 Magnetic Screwdriver
096-2619 5000 Remote Sensor Assembly (3 FT)

Sub-Assemblies & Electronics Spares

096-2613 PCB Cable Assembly
096-2499 I/O and Power Supply Board
096-2498-1 CPU Board
096-2498 CPU Board with SST
096-2497 Display Board

Replacement Sensors

096-1965-0100 Ammonia (NH3) – Model 85 [100 PPM STANDARD RANGE]
096-1965-0250 Ammonia (NH3) – Model 85 [250 PPM]
096-1965-0300 Ammonia (NH3) – Model 85 [300 PPM]
096-1965-0050 Ammonia (NH3) – Model 85 [50 PPM]
096-1965-0500 Ammonia (NH3) – Model 85 [500 PPM]
093-0536 Carbon Dioxide (CO2) – Freedom 6000 Infrared Sensor [0-5%]
096-1962-0050 Carbon Monoxide (CO) – Model 82 [50 PPM STANDARD RANGE]
096-1962-0100 Carbon Monoxide (CO) – Model 82 [100 PPM STANDARD RANGE]
096-1962-1000 Carbon Monoxide (CO) – Model 82 [1000 PPM]
096-1962-0250 Carbon Monoxide (CO) – Model 82 [250 PPM]
096-1962-0500 Carbon Monoxide (CO) – Model 82 [500 PPM]
096-2315-0001 Chlorine Dioxide ROCK SOLID (ClO2) – Model 78 (HI %RH) [1 PPM STANDARD RANGE]
096-2315-0005 Chlorine Dioxide ROCK SOLID (ClO2) – Model 78 (HI %RH)[5 PPM ]
096-2315-0003 Chlorine Dioxide ROCK SOLID (CLO2) – Model 78 (HI %RH) [3 PPM]
096-2247-0001 Chlorine ROCK SOLID (Cl2) – Model 22 (LOW %RH) [1 PPM]
096-2247-0010 Chlorine ROCK SOLID (Cl2) – Model 22 (LOW %RH) [10 PPM]
096-2247-0020 Chlorine ROCK SOLID (Cl2) – Model 22 (LOW %RH) [20 PPM]
096-2247-0005 Chlorine ROCK SOLID (Cl2) – Model 22 (LOW %RH) [5 PPM]
096-2295-0010 Chlorine ROCK SOLID (Cl2) – Model 24 (HI %RH) [10 PPM]
096-2295-0020 Chlorine ROCK SOLID (Cl2) – Model 24 (HI %RH) [20 PPM]
096-2295-0003 Chlorine ROCK SOLID (Cl2) – Model 24 (HI %RH) [3 PPM]
096-2295-0030 Chlorine ROCK SOLID (Cl2) – Model 24 (HI %RH) [30 PPM]
096-2295-0005 Chlorine ROCK SOLID (Cl2) – Model 24 (HI %RH) [5 PPM STANDARD RANGE]
096-2905-0010 Ethylene Oxide (ETO) – Model 15 [0-10 PPM)
096-2846-0001 Fluorine (F2) ROCK SOLID – Model 17 (LO %RH) [1 PPM]
096-2847-0003 Fluorine (F2) ROCK SOLID – Model 18 (HI %RH) [3 PPM]
096-2847-0005 Fluorine (F2) ROCK SOLID – Model 18 (HI %RH) [5 PPM STANDARD RANGE]
096-2334-0001 Hydrogen Bromide ROCK SOLID (HBr) – Model 94 (LOW %RH) [1 PPM]
096-2334-0005 Hydrogen Bromide ROCK SOLID (HBr) – Model 94 (LOW %RH) [5 PPM]
096-2335-0010 Hydrogen Bromide ROCK SOLID (HBr) – Model 95 (HI %RH) [10 PPM]
096-2335-0030 Hydrogen Bromide ROCK SOLID (HBr) – Model 95 (HI %RH) [30 PPM]
096-2333-0025 Hydrogen Chloride ROCK SOLID (HCl) – Model 93 Standard %RH >55% [25 PPM]
096-2332-0001 Hydrogen Chloride ROCK SOLID (HCl) – Model 92 (LOW %RH) [1 PPM]
096-2332-0010 Hydrogen Chloride ROCK SOLID (HCl) – Model 92 (LOW %RH) [10 PPM STANDARD RANGE]
096-2333-0010 Hydrogen Chloride ROCK SOLID (HCl) – Model 93 Standard %RH >55% [10 PPM STANDARD RANGE]
096-1952-0100 Hydrogen Cyanide (HCN) – Model 64 [100 PPM]
096-1952-0025 Hydrogen Cyanide (HCN) – Model 64 [25 PPM]
096-2330-0001 Hydrogen Fluoride ROCK SOLID (HF) – Model 90 LOW %RH (<55%) [1 PPM]
096-2330-0010 Hydrogen Fluoride ROCK SOLID (HF) – Model 90 LOW %RH (<55%) [10 PPM]
096-2331-0010 Hydrogen Fluoride ROCK SOLID (HF) – Model 91 Standard %RH (>55%) [10 PPM]
096-2331-0030 Hydrogen Fluoride ROCK SOLID (HF) – Model 91 Standard %RH (>55%) [30 PPM]
096-2331-0005 Hydrogen Fluoride ROCK SOLID (HF) – Model 91 Standard %RH (>55%) [5 PPM]
096-2751-0025 Hydrogen Sulfide – Model 21 Special Low Methanol Sensitivity [25 PPM]
096-2751-0050 Hydrogen Sulfide – Model 21 Special Low Methanol Sensitivity [50 PPM]
096-2751-0100 Hydrogen Sulfide – Model 21 Special Low Methanol Sensitivity [100 PPM]
096-2751-0200 Hydrogen Sulfide – Model 21 Special Low Methanol Sensitivity [200 PPM]
096-1959-0100 Hydrogen Sulfide – Model 72 (LOW %RH) [100 PPM]
096-1959-0050 Hydrogen Sulfide – Model 72 (LOW %RH) [50 PPM STANDARD RANGE]
096-1961-0100 Hydrogen Sulfide – Model 81 (HI %RH) [100 PPM]
096-1961-0200 Hydrogen Sulfide – Model 81 (HI %RH) [200 PPM]
096-1961-0025 Hydrogen Sulfide – Model 81 (HI %RH) [25 PPM]
096-1961-0050 Hydrogen Sulfide – Model 81 (HI %RH) [50 PPM STANDARD RANGE]
096-1964-0010 Nitrogen Dioxide – Model 84 [10 PPM STANDARD RANGE]
096-2809-0010 Nitrogen Trifluoride – Model 33P [10 PPM] ROCK SOLID
096-1960-0010 Oxygen (O2) – Model 80 [10%]
096-1960-0025 Oxygen (O2) – Model 80 [25% STANDARD RANGE]
096-2378-0001 Ozone ROCK SOLID (O3) – Model 77 Standard %RH (>55%RH)[1 PPM STANDARD RANGE]
096-2377-0001 Ozone ROCK SOLID (O3) Model 76 Low % RH (<55% RH) [1 PPM STANDARD]
096-1956-0010 Silane (SiH4)- Model 68 [10 PPM]
096-1956-1000 Silane (SiH4)- Model 68 [1000 PPB STANDARD RANGE]
096-1963-0010 Sulfur Dioxide (SO2) – Model 83 (HI %RH) [10 PPM]
096-2359-0100 Sulfur Dioxide (SO2) Model 75 (Low %RH) [100 PPM]
096-1963-0100 Sulfur Dioxide (SO2) – Model 83 (HI %RH) [100 PPM]
096-1963-0050 Sulfur Dioxide (SO2) – Model 83 (HI %RH) [50 PPM]
096-1963-0500 Sulfur Dioxide (SO2) – Model 83 (HI %RH) [500 PPM]
096-2336-0001 Sulfur Dioxide ROCK SOLID – Model 96 (LOW %RH) [1 PPM]
096-2336-0010 Sulfur Dioxide ROCK SOLID – Model 96 (LOW %RH) [10 PPM STANDARD RANGE]
096-2336-0003 Sulfur Dioxide ROCK SOLID – Model 96 (LOW %RH) [3 PPM]
096-2337-0001 Sulfur Dioxide ROCK SOLID – Model 97 (HI %RH) [1 PPM]
096-2337-0010 Sulfur Dioxide ROCK SOLID – Model 97 (HI %RH) [10 PPM STANDARD RANGE]
096-2337-0025 Sulfur Dioxide ROCK SOLID – Model 97 (HI %RH) [25 PPM]

Enquire About This Product