Regard 7000

Drager Regard 7000 Control System

  • Modular analysis system
  • Intuitive operation
  • Exceptional reliability & efficiency

In StockMake An Enquiry
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

The Drager REGARD 7000 is a modular and highly expandable analysis system for monitoring various gases and vapours. Suitable for gas warning systems with multiple levels of complexity and numbers of transmitters, the REGARD 7000 also features exceptional reliability and efficiency. An additional benefit is the backward compatibility with the REGARD.

Individual and highly compatible

The REGARD 7000 has been designed to meet individual requirements and suit various infrastructures. It processes analogue transmitter signals and supports remote access via HART. In addition, the REGARD 7000 provides a Modbus-Master interface1. Modbus RTU, PROFIBUS2, and PROFINET2 interfaces enable information processing in higher-level systems. Complex alarms can suit your requirements, and switching delays can be configured to optimise your processes. The modular structure of the REGARD 7000 makes it possible to adapt the system’s design to suit your exact needs. The system can be altered or extended with ease. You can also connect existing REGARD equipment to the new REGARD 7000. The advantages of the REGARD 7000 regarding overview and documentation can be translated to the entire system.

Safe and secure with minimal false alarms

The REGARD 7000 uses a ‘masterless’ system architecture. This prevents the entire system from failing if one component fails (single point of failure). It also makes it easier to add on independent subsystems. The use of optimised software filters in signal preparation, the option of suppressing the alarm and comparing analogue and digitally transmitted measurement values mean that false alarms are prevented more effectively than ever before. Special signals (errors, warnings, etc.) transmitted in analogue form are always correctly identified, facilitating the assessment process.

Optimal installation and configuration

Channel configuration is made significantly faster and more secure using metadata transmitted via HART from the transmitter or the configuration assistant. The logical restrictions on the possible manual settings effectively prevent incorrect configurations. The REGARD 7000 supports operation by preparing documents directly at the source. A simple menu structure and user-friendly displays on the dashboard, as well as the easy-to-learn operation and the associated symbols, ensure that the operation is as safe and secure as possible. You can prepare the configuration via PC software offline and upload it to the system later. The wiring can be structured and tidied away before the main components are installed.

Maintenance and documentation — as efficient as possible

The REGARD 7000 can use HART communication, making it much more efficient to maintain your gas warning system. It allows you to access all connected HART-enabled transmitters from a central point remotely. This ensures better preparation of maintenance work concerning the provision of materials and tools. It also makes it easier to guide service personnel with greater accuracy. Simulations can be started on the transmitter via remote access, for example, to test allocations. For example, the documentation frequently required by monitoring institutions can also be generated by the REGARD 7000. This documentation is made available without the need for additional tools.

Order Information

8326850 REGARD 7000 Advanced Dashboard 6RU
8326860 REGARD 7000 Advanced Dashboard PM
8327840 REGARD 7000 Advanced Dashboard 3RU
8322286 REGARD 7000 Docking Station 8-slot
8322320 REGARD 7000 Docking Station 4-slot
8324001 REGARD 7000 4-20 mA Input Module
8324003 REGARD 7000 Digital Input Module
8324870 REGARD 7000 Bridge Module
8323250 REGARD 7000 Relay Module 24 V DC
8324010 REGARD 7000 Relay Module 240 V AC
8324874 REGARD 7000 Relay Module 24 V DC complex
8324875 REGARD 7000 Relay Module 240 V AC complex
8323812 REGARD 7000 Slot Cover
8324016 REGARD 7000 Terminal Block 24-pin AC
8324020 REGARD 7000 Terminal Block 24-pin DC
8324871 REGARD 7000 Terminal Block 2-pin
8324017 REGARD 7000 Terminal Block 16-pin
8327250 REGARD 7000 4-20 mA Input Module c/w HART
8324872 REGARD 7000 Modbus RTU Gateway Set
8323815 REGARD 7000 Long Distance Gateway Set

    Enquire About This Product


    Title Size
    Regard 7000 Datasheet 252 KB

    Additional information

    Weight 0.09 kg

    Specifications

    Drager REGARD 7000 Advanced Dashboard 6RU
    Operating voltage 24 V (19.2 to 28.8 V) DC
    Current draw Typ. 1.0 A at 24 V DC
    Dimensions 266 x 483 x 68 mm / 10.47 x 19.02 x 2.68″ (H x W x D)
    Weight 3,800 g / 8.16 lbs
    Drager REGARD 7000 Advanced Dashboard PM
    Operating voltage 24 V (19.2 to 28.8 V) DC
    Current draw Typ. 1.0 A at 24 V DC
    Dimensions 286 x 347 x 68 mm / 11.26 x 13.66 x 2.68″ (H x W x D)
    Weight 3,700 g / 8.16 lbs
    Drager REGARD 7000 Advanced Dashboard 3RU
    Operating voltage 24 V (19.2 to 28.8 V) DC
    Current draw Typ. 0.7 A at 24 V DC
    Dimensions 132,5 x 483 x 155,5 mm / 5.0 x 19.02 x 6.1″ (H x W x D)
    Weight 2490 g / 5.49 lbs
    Drager REGARD 7000 Docking Station 8-slot
    Terminal clamps Plug-in contacts for wire cross sections of 0.08 to 2.5 mm
    Operating voltage 24 V (18 to 30 V) DC
    Current draw: Max. 22 A (independent of the number of installed modules and connected transmitters)
    Power loss Max. 15 W at 24 V
    SFR output Min. 3.3 V, 10 mA, max. 30 V, 2 A switching capacity; the SFR output must be protected against overload
    SSR output Min. 3.3 V, 10 mA, max. 30 V, 2 A switching capacity; the SSR output must be protected against overload
    Number of modules per docking station Max. 8
    Dimensions 184 x 400 x 78 mm / 7.24 x 15.75 x 3.07″ (H x W x D)
    Weight 2,600 g / 5.73 lbs
    Drager REGARD 7000 Docking Station 4-slot
    Terminal clamps Plug-in contacts for wire cross sections of 0.08 to 2.5 mm2
    Operating voltage 24 V (18 to 30 V) DC
    Current draw: Max. 11 A
    (independent of the number of installed modules and connected transmitters)
    Power loss Max. 15 W at 24 V
    SFR output Min. 5 V, 10 mA, max. 30 V, 2 A switching capacity; the SFR output must be protected against overload
    SSR output Min. 5 V, 10 mA, max. 30 V, 2 A switching capacity; the SSR output must be protected against overload
    Number of modules per docking station Max. 4
    Dimensions 183,5 x 213 x 78 mm / 7.22 x 8.37 x 3.07″ (H x W x D)
    Weight 895 g / 5.73 lbs
    Drager REGARD 7000 4-20 mA Input Module
    Number of input channels Max. 8
    Operating voltage 24 V (18 to 30 V) through docking station
    Transmitter supply voltage Typically 24 V, depending on the supply voltage of the docking station
    Transmitter supply current Max. 500 mA per channel, with max. 4 inputs occupied
    Max. 250 mA per channel, with 4 to 8 inputs occupied
    Total transmitter supply current max. 2 A
    Voltage range for signal input 0 to 24 mA (short-circuit detection at 38 mA)
    Measurement precision ±0.05 mA ±0.002 mA/K (0 to 4 mA)
    ±1.25% ±0.05%/K (4 to 24 mA)
    Current draw Max. 2.1 A
    Power loss Max. 5 W at 24 V
    Terminal block 24-pin, DC
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 265 g / 0.58 lbs
    Drager REGARD 7000 4-20 mA Input Module c/w HART
    Number of input channels Max. 8
    Operating voltage 24 V (18 to 30 V) through docking station
    Transmitter supply voltage Typically 24 V, depending on the supply voltage of the docking station
    Transmitter supply current Max. 500 mA per channel, with max. 4 inputs occupied
    Max. 250 mA per channel, with 4 to 8 inputs occupied
    Total transmitter supply current max. 2 A
    Voltage range for signal input 0 to 24 mA (short-circuit detection at 38 mA)
    Measurement precision ±0.05 mA ± 0.002 mA/K (0 to 4 mA)
    ±1.25% ± 0.05%/K (4 to 24 mA)
    Current draw Max. 2.1 A
    Power loss Max. 5 W at 24 V
    Terminal block 24-pin, DC
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 265 g / 0.58 lbs
    Drager REGARD 7000 Digital Input Module
    Number of input channels Max. 8
    Operating voltage 24 V (18 to 30 V) through docking station
    Channel output voltage Typically 24 V, depending on the supply voltage of the docking station
    Supply current of the connected input elements Max. 400 mA per channel, with max. 4 inputs occupied
    Max. 250 mA per channel, with 4 to 8 inputs occupied
    Total supply current max. 2 A
    Standby current through EOL resistance Configurable to 0 mA (line break detection switched off)
    and in the range of 5 to 400 mA
    Switching threshold Configurable in the range of 3 to 400 mA
    Current draw Max. 2.1 A
    Power loss Max. 5 W at 24 V
    Terminal block 16-pin, DC
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 265 g / 0.58 lbs
    Drager REGARD 7000 Gateway Module (Part of 8324872)
    Number of channels 1 channel, bidirectional; One gateway module always occupies one port in the overall system
    Modbus RTU gateway and gateway module supply voltage 24 V (18 to 30 V) DC
    Gateway module current draw Typ. 160 mA at 24 V
    Gateway module power loss Max. 4 W at 24 V
    Modbus RTU gateway current draw Typ. 80 mA at 24 V
    Modbus RTU gateway power loss Max. 2.5 W at 24 V
    Transmission rate Adjustable 9,600 to 921,600 baud
    Cable length between Drager REGARD 7000 Gateway O/P and Drager
    REGARD 7000 Modbus RTU Gateway    		 Max. 5 m
    Cable type STP (shielded twisted pair), e.g. LAPP Unitronic Bus LD
    Cable length RS-485 side <57,600 baud max. 1,200 m
    <230,400 baud max. 500 m
    <921,600 baud max. 120 m
    Terminal block 2-pin
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 265 g / 0.58 lbs
    Galvanic isolation between Drager REGARD 7000 and field-bus side through Modbus RTU Gateway
    Drager REGARD 7000 Modbus RTU Gateway (Part of 8324872)
    Dimensions 116 x 23 x 115 mm / 4.57 x 0.91 x 4.53″ (H x W x D)
    Weight 130 g / 0.29 lbs
    Drager REGARD 7000 Bridge Module
    Current draw Typ. 160 mA at 24 V
    Power loss Max. 4 W at 24 V
    Number of channels 1 channel, bidirectional; One bridge module always occupies 99 ports in the overall system
    Transmission rate 4,800 baud
    Cable length Max. 100 m
    Cable type STP (shielded twisted pair), e.g. LAPP Unitronic Bus LD
    Terminal block 2-pin
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 265 g / 0.58 lbs
    Drager REGARD 7000 Relay Module 240 V AC/240 V AC complex
    Number of output relays 8, each with one potential-free changeover
    Switching voltage 110 to 240 V AC
    Switching current 10 mA to 2 A; cosine phi ≥0.4
    Power consumption Max. 100 mA (no relays activated)
    Max. 200 mA (8 relays activated)
    Power loss Max. 5 W at 24 V
    Update rate of switch outputs 0.5 s
    Terminal block 24-pin, 240 V AC
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 340 g / 0.75 lbs
    Drager REGARD 7000 Relay Module 24 V DC/24 V DC complex
    Number of output relays 8, each with one switch contact
    Switching voltage 3.3 to 24 V DC
    Switching current 10 mA to 2 A
    Power consumption Max. 100 mA (no relays activated)
    Max. 200 mA (8 relays activated)
    Power loss 5 W at 24 V
    Update rate of switch outputs 0.5 s
    Terminal block 24-pin, 24 V
    Dimensions 110 x 46 x 130 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 340 g / 0.75 lbs
    Drager REGARD 7000 Long Distance Gateway (Part of 8323815)
    Supply voltage 24 V (18 to 30 V) DC
    Long distance gateway port current draw Typ. 4 mA at 24 V
    Long distance gateway port power loss Max. <0.1 W at 24 V
    Converter current draw Typ.<180 mA per converter at 24 V
    Converter power loss Max. 5 W at 24 V per converter
    Transmission rate 5 MBit/s
    Galvanic isolation Ethernet to DSL
    Transmission distance Up to 3,000 m (9,843 ft), depending on wire cross-section and interference factors
    Dimensions 110 x 46 x 85 mm / 4.33 x 1.81 x 5.12″ (H x W x D)
    Weight 115 g / 0.25 lbs
    Drager REGARD 7000 Ethernet to DSL Converter (Part of 8323815)
    Dimensions 99 x 35 x 115 mm / 3.9 x 1.38 x 4.53″ (H x W x D)
    Weight 185 g / 0.41 lbs
    Drager REGARD 7000 Slotcover
    Dimensions 110 x 46 x 85 mm / 4.33 x 1.81 x 3.35″ (H x W x D)
    Weight 115 g / 0.25 lbs
    Drager REGARD 7000 Terminal Block
    Dimensions 69 x 44 x 44 mm / 2.72 x 1.73 x 1.73″ (H x W x D)
    Weight 53 g / 0.12 lbs

      Enquire About This Product