Drager Polytron 3000 is a fixed, intrinsically safe, entry-level gas detector for Toxic gases and Oxygen. Supplied with a docking station, the docking station is wired in, and the transmitter clips in and locks into place.
Time and cost are minimised for maintenance and sensor replacement as the Drager Polytron 3000 transmitter accepts factory-calibrated electrochemical sensors. If preferred, a user can execute calibration. A choice of over 60 different toxic gases and O2 is available. This makes the Polytron 3000 ideal for a wide range of applications from general industry, chemicals to semiconductor.
Interaction with a control panel or building management system is possible with a 4-20mA output.
Power requirement 12 to 30 VDC, 2-wire.
Operating temperature range – 40 to + 65 °C.
Ingress protection IP66/67
Approvals: Certified as type P3S. ATEX, IECEx, UL, CSA & CE marked
Available with or without display
Optional duct mounting kit
Size approximately 166 x 135 x 129 mm, 900 g
Replaces the Polytron C model
Common Sensors
Acid Compounds – 0 to 3 / 10 ppm
Ammonia (NH3) – 0 to 100 / 300 / 1000 ppm
Boron Trichloride (BCl3) – 0 to 10 ppm
Carbon Monoxide (CO) – 0 to 100 / 300 / 1000 ppm
Chlorine (Cl2) – 0 to 1 / 10 / 25 ppm
Diborane (B2H6) – 0 to 0.5 ppm
Hydride (PH3) – 0 to 0.3 / 1 / 10 ppm
Hydrogen (H2) – 0 to 1000 / 3000 ppm
Hydrogen Sulfide (H2S) – 0 to 20 / 50 / 100 ppm
Hydrazine (N2H4) – 0 to 1 ppm
Nitrogen Dioxide (NO2) – 0 to 10 ppm
Nitrogen Monoxide (NO) – 0 to 50 ppm
Organic Vapours – 0 to 50 / 100 / 200 ppm
Oxygen (O2) – 0 to 5 / 25 / 100 Vol.%
Ozone (O3) – 0 to 0.5 ppm
Sulfur Dioxide (SO2) – 0 to 10 ppm