The Drager Pac 6000 is a disposable personal detector for single gas. It can measure CO, H2S, SO2 or O2 with reliability and precision, even in challenging conditions. A durable design and a powerful battery ensure safety for up to two years with minimal maintenance.
Strong performance for maximum safety
Powerful sensors with a very low t-90 response time ensure quick reactions. The Pac 6000 is versatile thanks to its wide measurement range. For example, the CO sensor measures 1 to 1,999 ppm, and the H2S sensor measures concentrations from 0.4 to 100 ppm.
Easy handling thanks to clear user guidance
The D-Light indicates whether the device’s functionality has been tested and is ready to use. The housing is also designed with your safety in mind: each sensor variant of the Drager Pac 6000 features a clear, well-visible colour coding, thereby minimising the chance of mistakes.
Robust design – even for the most challenging conditions
The Pac 6000 can easily handle extreme conditions: depending on the sensor, temperatures from -40 °C to 55 °C and air pressures between 700 and 1,300 mbar can be tolerated.
A membrane filter protects the sensor from foreign matter, such as dust and liquids. The shock-proof, chemical-resistant housing meets the requirements specified in the IP68 standard rating.
User-friendly display with all vital information
The large display is non-verbal and indicates the respective gas concentration. Other important information, such as remaining operating time and battery capacity, is also displayed. The bright backlighting ensures a visible reading of all values in the dark.
360° alarm with various functions
If the Drager Pac 6000 measures hazardous gas concentrations, it creates an audible, visual, and noticeable vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The acoustic alarm reaches a volume of 90 dB. The display can show the peak concentration measured at any given moment. Earlier alarms registered can also be retrieved later, even if acknowledged.
The Pac 6000 with oxygen sensor has two additional alarm thresholds and the standard alarm threshold setting.
Event logger for analyses and reports
The Drager Pac 6000 logs concentrations and events along with date and time. The data can be downloaded to a PC via an interface and processed further.
Economical operational costs
The Pac 6000 versions have highly durable DragerSensors and a powerful battery. Neither the sensor nor the battery must be changed for the entire two-year maintenance-free service life of the H2S, SO2 and CO versions. The service life of the Drager Pac 6000 starts when it is first activated. The device automatically switches off after two years.
The Pac 6000 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes soiled, you can quickly and easily replace it. The device is then ready to use again in no time.
Fast function test saves time and money
Function tests and calibrations can be performed efficiently using the Drager X-dock calibration station. The automatic bump tests in the X-dock are a cost-efficient and convenient solution thanks to the short test duration and extremely low test gas consumption. The Drager Pac 6000 is placed in the bump test station and automatically selects the correct setting.
8326321 Pac 6000 CO 0 – 2,000 ppm
8326320 Pac 6000 H2S 0 – 100 ppm
8326322 Pac 6000 O2 0 – 25 Vol.-%
8326323 Pac 6000 SO2 0 – 100 ppm
3727138 Pac 6000 license lifetime extension
8318588 Calibration adapter
8321881 Drager X-dock 5300 Pac
8317410 Drager Bump Test Station for Drager Pac, without gas cylinder
8318586 Drager Bump Test Station for Drager Pac, including one test gas cylinder (gas and concentration selectable)
8318587 Communication module, including USB cable
8326853 Sensor grid (black)
8319186 Crocodile clip set