|
Gas-Pro TK MED Pumped detector with multi-region charge and cradle |
| GTPE8AAC-ZZDADBRGOC |
Gas-Pro TK MED 4-gas Dual IR Methane, O2, CO & H2S |
| GTPE8AAC-ACZZRGOCZZ |
Gas-Pro TK MED 3-gas Dual IR Methane, O2 & CO |
| GTPE8AAC-ALZZRGOCZZ |
Gas-Pro TK MED 3-gas Dual IR Methane, O2 & H2S |
| GTPE8AAC-ZZZZRGOCZZ |
Gas-Pro TK MED 2-gas Dual IR Methane & O2 |
|
Gas-Pro TK MED Pumped detector with multi-region charge and cradlePumped detector with multi-region charger, without cradle |
| GTPE8AAA-ZZDADBRGOC |
Gas-Pro TK MED 4-Gas Dual Range IR Methane, O2, CO & H2S |
| GTPE8AAA-ACZZRGOCZZ |
Gas-Pro TK MED 3-Gas Dual Range IR Methane, O2 & CO |
| GTPE8AAA-ALZZRGOCZZ |
Gas-Pro TK MED 3-gas Dual IR Methane, O2 & H2S |
| GTPE8AAA-ZZZZRGOCZZ |
Gas-Pro TK MED 2-Gas Dual Range IR Methane & O2 |
|
Gas-Pro TK UKCA MED Pumped detector with multi-region charge and cradle |
| GTPU0AAC-ZZDADBRGOC |
Gas-Pro TK UKCA MED 4-gas Dual IR Methane, O2, CO & H2S |
| GTPU0AAC-ACZZRGOCZZ |
Gas-Pro TK UKCA MED 3-gas Dual IR Methane, O2 & CO |
| GTPU0AAC-ALZZRGOCZZ |
Gas-Pro TK UKCA MED 3-gas Dual IR Methane, O2 & H2S |
| GTPU0AAC-ZZZZRGOCZZ |
Gas-Pro TK UKCA MED 2-gas Dual IR Methane & O2 |
|
Gas-Pro TK UKCA MED Pumped detector with multi-region charger, without cradle |
| GTPU0AAA-ZZDADBRGOC |
Gas-Pro TK UKCA MED 4-gas Dual IR Methane, O2, CO & H2S |
| GTPU0AAA-ACZZRGOCZZ |
Gas-Pro TK UKCA MED 3-gas Dual IR Methane, O2 & CO |
| GTPU0AAA-ALZZRGOCZZ |
Gas-Pro TK UKCA MED 3-gas Dual IR Methane, O2 & H2S |
| GTPU0AAA-ZZZZRGOCZZ |
Gas-Pro TK UKCA MED 2-gas Dual IR Methane & O2 |
|
Gas-Pro Replacement Sensors |
| SS0101 |
0-100% LEL (for all released flammable pellistor options) |
| SS0150 |
0-100% LEL unfiltered (ethanol) |
| SS0280 |
0-5% vol. carbon dioxide (CO2 IR) |
| SS0501 |
0-30% Oxygen (3 Year) |
| SS0304 |
Sulphur dioxide 0-20ppm H2S filtered |
| SS0305 |
Chlorine 0-5ppm (diffusion only) |
| SS0309 |
Ozone 0-1ppm (diffusion only) |
| SS0306 |
Ammonia 0-100ppm |
| SS0310 |
Nitric oxide 0-100ppm (diffusion only) |
| SS0311 |
Nitrogen dioxide 0-20ppm |
| SS0308 |
Chlorine dioxide 0-1ppm (diffusion only) |
| SS0205 |
Carbon monoxide 0-2000ppm |
| SS0302 |
Carbon monoxide 0-2000ppm (Gas-Pro) (H2 filtered) |
| SS0206 |
Hydrogen sulphide 0-100 ppm |
| SS0404 |
Hydrogen sulphide 0-1000ppm |
| SS0313 |
Hydrogen cyanide 0-50ppm |
| SS0201 |
Methane 0-100% LEL IR |
| SS0203 |
Pentane 0-100% LEL IR |
| SS0204 |
Propane 0-100% LEL IR |
| SS0506 |
H2 0-1000ppm |
| SS0507 |
Ammonia 0-1000ppm |
| SS0113 |
Dual Toxic SO2 0-20ppm/H2S 0-100ppm spare sensor |
|
Gas-Pro Spares |
| SS0700 |
Sensor blank and seal |
| SS0719 |
10 x Sensor seals – standard |
| SS0701 |
10 x Sensor seals – sensor blank |
| SS0702 |
10 x Sensor seals – dual toxic |
| SS0703 |
Full set of Gas-Pro screws and nuts |
| SS0704 |
Case Screws 4 off M3 x12 |
| SS0705 |
Screws 7 off KB22 x6 (display and PCB) |
| SS0706 |
Display to main board connector and adhesive pad |
| SS0707 |
Display to main board connector adhesive pads x10 |
| SS0708 |
Gas-Pro Crowcon bubble label |
| M050085 |
Gas-Pro IR Branded Domed label |
| SS0709 |
Gas-Pro front (including bubble label) and rear case moulding assembly (including 4 screws) |
| M02362 |
Alligator clip |
| SS0710 |
Gas-Pro spare battery |
| SS0711 |
Gas-Pro battery tray |
| SS0712/A |
Gas-Pro main PCB (Board A = B1 Variant) including 4 screws (supplied in English with standard settings) |
| SS0712/B |
Gas-Pro main PCB (Board B = B2 Variant) including 4 screws (supplied in English with standard settings) |
| SS0712/C |
Gas-Pro main PCB (Board C = B3 Variant) including 4 screws (supplied in English with standard settings) |
| SS0713 |
Gas-Pro sounder seal |
| SS0714 |
Vibrator |
| SS0715 |
Pump including gasket and screws |
| SS0716 |
Pump blanking assembly including gasket |
| SS0717 |
Gas-Pro display assembly (includes LCD, backlight, mounting bracket and screws) |
| SS0718 |
10 x Servicing sounder bungs |
| SS0720 |
Replacement Gas-Pro certification label (serial number needed at time of order) authorised service centre only |
| SS0722 |
Gas-Pro individual sensor calibration gas plate |
| SS0723 |
Replacement Calibration report (only if calibrated at Crowcon within 6 months, serial number required at time of order) |
| SS0731 |
Insulator for Gas-Pro B1 Board |
| SS0730 |
Insulator for Gas-Pro B2 Board |
| SS0729 |
Insulator for Gas-Pro B3 Board |
| SS0733 |
Flow plate gasket – Gas-Pro flow plate, non-pumped |
| SS0734 |
Flow plate gasket – Gas-Pro flow plate, pumped |
| SS0735 |
Flow plate gasket – Gas-Pro calibration flow plate, no magnet |
| SS0736 |
Gas-Pro Battery Adhesive Pads x10 |
| M040030 |
Quick release Luer fitting for Gas-Pro flow plate |
| M040123 |
Filter element for S013055 dust filter flow plate (min order 5) |
| AC0611 |
Adhesive flow plate gasket for I-Test (Gas-Pro) |
|
Gas-Pro TK Spares |
| SS0744 |
IR Sensor RF Gasket |
| SS0746 |
Gas Pro black casings kit |
