Crowcon Gas-Pro
Gas-Pro

Crowcon Gas-Pro MED Portable Gas Detector

Code: GPPE8AB
  • Marine approved
  • 3 year warranty
  • Easy operation

In StockMake An Enquiry
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

This flexible multigas detector is a compact, rugged IP65 & IP67 device capable of withstanding harsh marine environments. The Gas-Pro MED with an internal pump simplifies confined space access with an intuitive pre-entry checking feature. Positive Safety provides continual visual assurance of unit compliance to the user and others. Manage and easily maintain Gas-Pro detectors using Crowcon I-Test bump and calibration solution (available separately).

Features

  • Marine Equipment MED: 1500009/M2
  • Certified to: IECEx: Ex d ia IIC T4 Gb Tamb -20°C to +55°C
  • ATEX: II 2 G Ex d ia IIC T4 Gb Tamb -20°C to +55°C
  • Alarms; audible >95dB @ 30cm (98dB @30cm in loud mode), visual – all angle dual red/blue LEDs &
    vibrating
  • IR sensors resistant to silicon poisoning, long life & low maintenance
  • VOC monitoring for working with fuels, paint thinners & glues
  • Battery life 14 hours from a full charge (13 hours pumped operation) based on CH4, O2, H2S & CO.
    Typical charge time 7.5 hours
  • Bump test and calibration reminders
  • Datalogging 125 hours based on 10-second intervals, 45,000 logs
  • Event logging; alarm, over-range, calibration, bump, on/off, TWA, 1000 events
  • Operating temperature -20°c to + 55°C
  • Interface data connection for gas test solutions and direct to PC
  • Ingress protection IP65 & IP67
  • Charging; desktop cradle, USB power & communications lead, direct connection to a multiregional power supply and vehicle charger adaptor

    Enquire About This Product


    Title Size
    Gas-Pro Datasheet 390 KB
    Gas_Pro Manual 3 MB

    Additional information

    Weight 0.190 kg

    Ordering Information

    Gas-Pro MED Pumped detector with multi-region charge and cradle
    GPPE8ABC-DADBZZFDOC Gas-Pro MED 4-gas – CH4 %LEL, O2, CO, H2S
    GPPE8ABC-ACZZFDOCZZ Gas-Pro MED 3-gas – CH4 %LEL, O2, CO
    GPPE8ABC-ALZZFDOCZZ Gas-Pro MED 3-gas – CH4 %LEL, O2, H2S
    GPPE8ABC-ZZZZFDOCZZ Gas-Pro MED 2-gas – CH4 %LEL, O2
    Gas-Pro MED Pumped detector with multi-region charger, without cradle
    GPPE8ABA-DADBZZFDOC Gas-Pro MED 4-gas – CH4 %LEL, O2, CO, H2S
    GPPE8ABA-ACZZFDOCZZ Gas-Pro MED 3-gas – CH4 %LEL, O2, CO
    GPPE8ABA-ALZZFDOCZZ Gas-Pro MED 3-gas – CH4 %LEL, O2, H2S
    GPPE8ABA-ZZZZFDOCZZ Gas-Pro MED 2-gas – CH4 %LEL, O2
    Gas-Pro UKCA MED Pumped detector with multi-region charge and cradle
    GPPU0ABC-DADBZZFDOC Gas-Pro UKCA MED 4-gas – CH4 %LEL, O2, CO, H2S
    GPPU0ABC-ACZZFDOCZZ Gas-Pro UKCA MED 3-gas – CH4 %LEL, O2, CO
    GPPU0ABC-ALZZFDOCZZ Gas-Pro UKCA MED 3-gas – CH4 %LEL, O2, H2S
    GPPU0ABC-ZZZZFDOCZZ Gas-Pro UKCA MED 2-gas – CH4 %LEL, O2
    Gas-Pro UKCA MED Pumped detector with multi-region charger, without cradle
    GPPU0ABA-DADBZZFDOC Gas-Pro UKCA MED 4-gas – CH4 %LEL, O2, CO, H2S
    GPPU0ABA-ACZZFDOCZZ Gas-Pro UKCA MED 3-gas – CH4 %LEL, O2, CO
    GPPU0ABA-ALZZFDOCZZ Gas-Pro UKCA MED 3-gas – CH4 %LEL, O2, H2S
    GPPU0ABA-ZZZZFDOCZZ Gas-Pro UKCA MED 2-gas – CH4 %LEL, O2
    Gas-Pro Replacement Sensors
    SS0101 0-100% LEL (for all released flammable pellistor options)
    SS0150 0-100% LEL unfiltered (ethanol)
    SS0280 0-5% vol. carbon dioxide (CO2 IR)
    SS0501 0-30% Oxygen (3 Year)
    SS0304 Sulphur dioxide 0-20ppm H2S filtered
    SS0305 Chlorine 0-5ppm (diffusion only)
    SS0309 Ozone 0-1ppm (diffusion only)
    SS0306 Ammonia 0-100ppm
    SS0310 Nitric oxide 0-100ppm (diffusion only)
    SS0311 Nitrogen dioxide 0-20ppm
    SS0308 Chlorine dioxide 0-1ppm (diffusion only)
    SS0205 Carbon monoxide 0-2000ppm
    SS0302 Carbon monoxide 0-2000ppm (Gas-Pro) (H2 filtered)
    SS0206 Hydrogen sulphide 0-100 ppm
    SS0404 Hydrogen sulphide 0-1000ppm
    SS0313 Hydrogen cyanide 0-50ppm
    SS0201 Methane 0-100% LEL IR
    SS0203 Pentane 0-100% LEL IR
    SS0204 Propane 0-100% LEL IR
    SS0506 H2 0-1000ppm
    SS0507 Ammonia 0-1000ppm
    SS0113 Dual Toxic SO2 0-20ppm/H2S 0-100ppm spare sensor
    Gas-Pro Spares
    SS0700 Sensor blank and seal
    SS0719 10 x Sensor seals – standard
    SS0701 10 x Sensor seals – sensor blank
    SS0702 10 x Sensor seals – dual toxic
    SS0703 Full set of Gas-Pro screws and nuts
    SS0704 Case Screws 4 off M3 x12
    SS0705 Screws 7 off KB22 x6 (display and PCB)
    SS0706 Display to main board connector and adhesive pad
    SS0707 Display to main board connector adhesive pads x10
    SS0708 Gas-Pro Crowcon bubble label
    M050085 Gas-Pro IR Branded Domed label
    SS0709 Gas-Pro front (including bubble label) and rear case moulding assembly (including 4 screws)
    M02362 Alligator clip
    SS0710 Gas-Pro spare battery
    SS0711 Gas-Pro battery tray
    SS0712/A Gas-Pro main PCB (Board A = B1 Variant) including 4 screws (supplied in English with standard settings)
    SS0712/B Gas-Pro main PCB (Board B = B2 Variant) including 4 screws (supplied in English with standard settings)
    SS0712/C Gas-Pro main PCB (Board C = B3 Variant) including 4 screws (supplied in English with standard settings)
    SS0713 Gas-Pro sounder seal
    SS0714 Vibrator
    SS0715 Pump including gasket and screws
    SS0716 Pump blanking assembly including gasket
    SS0717 Gas-Pro display assembly (includes LCD, backlight, mounting bracket and screws)
    SS0718 10 x Servicing sounder bungs
    SS0720 Replacement Gas-Pro certification label (serial number needed at time of order) authorised service centre only
    SS0722 Gas-Pro individual sensor calibration gas plate
    SS0723 Replacement Calibration report (only if calibrated at Crowcon within 6 months, serial number required at time of order)
    SS0731 Insulator for Gas-Pro B1 Board
    SS0730 Insulator for Gas-Pro B2 Board
    SS0729 Insulator for Gas-Pro B3 Board
    SS0733 Flow plate gasket – Gas-Pro flow plate, non-pumped
    SS0734 Flow plate gasket – Gas-Pro flow plate, pumped
    SS0735 Flow plate gasket – Gas-Pro calibration flow plate, no magnet
    SS0736 Gas-Pro Battery Adhesive Pads x10
    M040030 Quick release Luer fitting for Gas-Pro flow plate
    M040123 Filter element for S013055 dust filter flow plate (min order 5)
    AC0611 Adhesive flow plate gasket for I-Test (Gas-Pro)

      Enquire About This Product