Carbolite HST 12/600 Horizontal Split Tube Furnace heated length 600mm, supplied without work tube, maximum outer diameter 110mm.
Carbolite Gero HST 12/600 is a single zone bench mounted furnace that opens with hinges, allowing a work tube to be placed inside, removing insertion by the end bores as with a standard furnace. This allows larger tubes or vessels to be accommodated with flanges or end fittings and makes changing work tubes over easier. Adaptors allows the flexibility of accepting tubes lower than the maximum overall diameter of 110mm into the furnace.
The furnace heats using free wire radiating elements inside the furnace body, this and the use of a separate work tube reduces the probability of element damage. Supplied as above with separate control box connected by 2 metre conduit. Controller supplied is 301 digital PID allowing single ramp and process timer. Can be changed to allow 8 or 20 ramps with storage.
Maximum temperature is 1200C, with a continuous operating temperature of 1100C. Heat up time is 47 minutes. Uniform length is 300 mm plus or minus 5c. Maximum power consumption is 3000 watts.
Vacuum formed insulation assists uniformity giving fast heating and cooling.
Options
- Over temperature protection used if furnace has expensive contents or is left unattended for large periods of time.
- Work tubes varying lengths and diameters and materials – shock and chemically resistant.
- Insulation plugs, Work Tube Seals & Radiation shields to increase uniformity, combat heat loss and for atmosphere retention
- Pumps are offered for vacuum application: rotary vane pump or turbo molecular pump.
- L Stand allows for Vertical use
- Extension of control module to 6 metres
