Honeywell BW GasPoint Fixed Gas Detector

  • Obsolete
  • Spares discontinued
  • Direct replacement available

In StockMake An Enquiry

No longer manufactured. The recommended replacement is the Sensepoint XCD.

The GasPoint transmitter provides a 4-20 mA output signal that can be connected to any control system (DCS, PLC, etc.). With advanced sensor
technology and microcontroller-based operation, the GasPoint provides continuous monitoring of hazardous gases.

Features

  • The GasPoint transmitter can accept any GasPoint sensor type: electrochemical, catalytic or IR (infrared). All plug-in sensor assemblies are field-interchangeable.
  • Full-function sensor integrity test (auto) continuously monitors gas-sensing ability and end-of-life.
  • Equipped with three 5-amp relay contacts—two gas alarm relays (low/high) and fault alarm. Field-selectable normally energized/de-energized and latching/non-latching alarm relay functions.
  • Non-intrusive, one-person calibration with auto-zero and auto-span.
  • Two backlit alphanumeric LCDs advise all environmental and gas hazard conditions as well as instrument and sensor status.
  • Remote toxic/oxygen sensors can be installed up to 3,900 ft./1,100 m away; combustible sensors up to 1,550 ft./475 m. Kit can be installed at any time.
  • Alarm setpoints displayed on demand—press the external button.
  • Backlight (auto) in low-light conditions and during alarms.
  • Extensive fault diagnostics.
  • Field-programmable alarm levels.
  • 2-way digital communication using a MODBUS module.

Order Information

GP-WD Gas Transmitter with Combustible Catalytic Sensor
GP-IR-WD Gas Transmitter with Combustible Infrared Sensor
GP-HD Gas Transmitter with H2S Sensor
GP-MD Gas Transmitter with CO Sensor
GP-AD Gas Transmitter with NH3 Sensor
GP-ZD Gas Transmitter with HCN Sensor
GP-DD Gas Transmitter with NO2 Sensor
GP-SD Gas Transmitter with SO2 Sensor
GP-XD Gas Transmitter with O2 Sensor
GP-CD Gas Transmitter with Cl2 Sensor

Accessories and Spares

GP-POWER1 120-240 VAC Power Supply
GP-MBUS4 2-wire/4-wire MODBUS Communication Expansion Module
GP-SEP Sensor Separation Kit
GP-1 Gas Transmitter
GP-SSPB Stainless Steel Process Baffle
GP-SSCAL4 Stainless Steel GasPoint Splash Guard
GP-DUC-K1 Duct Mount Adaptor

Replacement Sensor Assemblies

SS-RH02…..H2S
SS-RM02…..CO
SS-RA02…..NH3
SS-RZ02…..HCN
SS-RD02…..NO2
SS-RC02…..Cl2
SS-RS02…..SO2
SS-RX02…..O2
SS-RW02….Combustible Catalytic Sensor Assembly
IR-RW03…..Combustible IR Sensor Assembly

    Enquire About This Product


    Title Size
    BW GasPoint Datasheet 171 KB
    BW GasPoint Manual 1 MB

    Additional information

    Weight 0.190 kg

    Specifications

    SIZE 130 x 130 x 52 mm
    WEIGHT 450g
    ENCLOSURE MATERIAL Polycarbonate
    INGRESS PROTECTION IP454
    CABLE GLAND ENTRIES 2 x M20
      Optional 6x M16
    OPERATING VOLTAGE 12-24 Vdc
    POWER 73 mA at 24V DC
      2 relays
    OUTPUT 4-20 mA Analog
      Sounder: 63dB at 1 meter
    INDICATORS Light: 4 Smart LED
    OPERATING TEMPERATURE -10°C to +50°C
    HUMIDITY 0 / 95% RH non condensing
    EMC COMPLIANCE EN 61000-6-3:2007 + A1:201
      EN 50270:2015
    ELECTRICAL SAFETY EN 61010-1: 2010 / A1: 2019 (AC version)
    REFRIGERATION EN 378-3
    STANDARDS COMPLIANCE EN 14624
      EN 50676
      IEC 60335-2-40 Annex LL
      ANSI/ASHRAE 15
      CSA B52: 2023
      F-Gas Regulation
      EU 573/2024
    WARRANTY 2 years on electronics
    1 year on sensor

      Enquire About This Product