Designed to meet the toughest industrial standards, the SMART S-SS series gas detectors are used in classified areas (zone 1 and, if equipped with the dust adapter, zone 21).
The infrared sensor is used to detect flammable substances, refrigerant gases and carbon dioxide; it is not susceptible to poisoning and has high selectivity. The sensor is housed in a stainless steel head with a diameter of 47.5 mm. The detector has a 12-24 Vdc power supply, a 4-20 mA signal output and an RS485 signal.
The SMART S-SS is equipped with a display (LCD or LED) to monitor the concentration in real-time and Hall effect sensors for non-intrusive calibration in the field.
To adapt to the customer’s needs, the SMART S-SS detector has the following customization possibilities:
- Choice of the sensor head based on the gas to be detected
- Choice of a transmitter (3-relay board, HART modem)
- Choice of enclosure (aluminium/steel, number of entrances)
Order Information
| 3A Transmitter Exd Aluminum enclosure, electronics and features | |
| SSS3A11 | Electronic with output RS485+4-20 mA, LCD display |
| SSS3A12 | Electronic with output RS485+4-20 mA, LED display |
| SSS3A13 | Electronic with output RS485+4-20 mA, LCD display, relay card |
| SSS3A14 | Electronic with output RS485+4-20 mA, LED display, relay card |
| SSS3A17 | Electronic with output RS485+4-20 mA, LCD display, relay card, Modem Hart |
| SSS3A18 | Electronic with output RS485+4-20 mA, LED display, relay card, Modem Hart |
| 4A Transmitter Exd Aluminum enclosure, electronics and features | |
| SSS4A11 | Electronic with output RS485+4-20 mA, LCD display |
| SSS4A12 | Electronic with output RS485+4-20 mA, LED display |
| SSS4A13 | Electronic with output RS485+4-20 mA, LCD display, 3-relay card |
| SSS4A14 | Electronic with output RS485+4-20 mA, LED display, 3-relay card |
| SSS4A17 | Electronic with output RS485+4-20 mA, LCD display, 3-relay card, Modem Hart |
| SSS4A18 | Electronic with output RS485+4-20 mA, LED display, 3-relay card, Modem Hart |
| 2S Transmitter Stainless steel enclosure, electronics and features | |
| SSS2S11 | Electronic with output RS485+4-20 mA, LCD display |
| SSS2S12 | Electronic with output RS485+4-20 mA, LED display |
| SSS2S13 | Electronic with output RS485+4-20 mA, LCD display, 3-relay card |
| SSS2S14 | Electronic with output RS485+4-20 mA, LED display, 3-relay card |
| SSS2S17 | Electronic with output RS485+4-20 mA, LCD display, 3-relay card, Modem Hart |
| SSS2S18 | Electronic with output RS485+4-20 mA, LED display, 3-relay card, Modem Hart |
| SMART S HEADS FOR SMART S-SS & S-MS | |
| IRS Infrared Technology | |
| Flammable gases | |
| S4019ME | METHANE sensor head, 0-100% LFL (full scale 4.4% vol) |
| S4001ME | METHANE sensor head, 0-100% LFL (full scale 5% vol) |
| S4004PR | PROPANE sensor head, 0-100% LFL |
| S4004BU | BUTANE sensor head, 0-100% LFL |
| S4004AT | ACETONE sensor head, 0-100% LFL |
| S4004BN | BUTADIENE sensor head, 0-100% LFL |
| S4004CE | CYCLO HEXANE sensor head, 0-100% LFL |
| S4004DT | DIMETHYL ETHER sensor head, 0-100% LFL |
| S4004EN | ETHANE sensor head, 0-100% LFL |
| S4004AE | ETHYL ACETATE sensor head, 0-100% LFL |
| S4004ET | ETHYL ALCOHOL sensor head, 0-100% LFL |
| S4004EP | HEPTANE sensor head, 0-100% LFL |
| S4004ES | HEXANE sensor head, 0-100% LFL |
| S4004IB | ISO BUTANE sensor head, 0-100% LFL |
| S4004IL | ISOBUTYLENE sensor head, 0-100% LFL |
| S4004IP | ISOPROPYL ALCOHOL sensor head, 0-100% LFL |
| S4004PE | PENTANE sensor head, 0-100% LFL |
| S4004PP | PROPYLENE sensor head, 0-100% LFL |
| S4004TO | TOLUENE sensor head, 0-100% LFL |
| S4004DE | R152a DIFLUOROETHANE sensor head, 0-100% LFL |
| S4157R454B | R454b sensor head, 0-100% LFL |
| S4065R32 | R32 DIFLUOROMETHANE sensor head, 0-100% LFL |
| S4066R1234YF | R1234yf sensor head, 0-100% LFL |
| S4067R1234ZE | R1234ze sensor head, 0-100% LFL |
| SF6 & REFRIGERANT | |
| S4152R32 | R32 sensor head, 0-2000 ppm |
| S4026R134A | R134a sensor head, 0-2000 ppm |
| S4027SF6 | SF6 sensor head, 0-2000 ppm |
| S4031R125 | R125 sensor head, 0-2000 ppm |
| S4032R1234YF | R1234yf sensor head, 0-2000 ppm |
| S4153R1234ZE | R1234ze sensor head, 0-2000 ppm |
| S4033R404A | R404A sensor head, 0-2000 ppm |
| S4034R407A | R407A sensor head, 0-2000 ppm |
| S4034R407F | R407F sensor head, 0-2000 ppm |
| S4154R449A | R449A sensor head, 0-2000 ppm |
| S4035R507A | R507A sensor head, 0-2000 ppm |
| S4036R410A | R410A sensor head, 0-2000 ppm |
| S4155R417A | R417A sensor head, 0-2000 ppm |
| S4156R448 | R448 sensor head, 0-2000 ppm |
| Carbon Dioxide (CO2) | |
| S4015CO2 | CARBON DIOXIDE (CO2) sensor head, 0-2% Vol. |
| S4016CO2 | CARBON DIOXIDE (CO2) sensor head, 0-5% Vol. |
| S4017CO2 | CARBON DIOXIDE (CO2) sensor head, 0-30% Vol. |
| ACCESSORIES for SMART3G-C3 gas detectors | |
| STS/CKD+ | Enhanced calibration keypad with 7-digit display and SD-CARD slot. It can be connected to all SMART detectors to adjust the Zero, Span and 4-20 mA values. Via the SD-CARD, it is also possible to update the detector’s firmware (feature not enabled on old SMART3G and NC detector) |
| STS/CKD-OLED | Enhanced calibration keypad with OLED display and SD-CARD slot. It can be connected to all SMART detectors to adjust the Zero, Span and 4-20 mA values. This version offers enhanced features like: – visualization of the instantaneous concentration in graphic format; – possibility to monitor the detector trend and download the data stored in the SD-CARD – detector’s firmware update via SD-CARD (feature not enabled on old SMART3G and NC detector) |
