- Unique Non-Dispersive Infrared (NDIR) sensors designed to meet official test standards
- Identify fuel flow, misfire & EVAP problems
- Pre-compliance & roadside emissions tester – local laws may apply
- Measure Lambda & AFR to improve engine efficiency & fuel consumption
- Test vehicles under real-world driving conditions
- Take EGA to the vehicle, not the vehicle to the analyser
- Test vehicle A/C & refrigeration systems*
Features
- Large graphic display
- Unique NDIR sensors for accurate measurements with fast warm-up
- Add optional KANE LINK devices
- Store over 200 tests
- Rechargeable battery with minimum 4-hour life
- Rugged & portable with protective rubber sleeve
- Document test results with optional KANE-IRP3 printer
- Ten-year warranty when serviced & recertified by KANE
- Backed by KANE CARE – We promise never to let you down or your money back
Applications
- Real-time vehicle/engine testing in the workshop & road
- Instant engine, exhaust system & catalytic converter tests
- Vehicle smog checks, tune-ups & diagnostics
- Check repair work with before & after test
- Maintain engines to manufacturer specification
- A/C & refrigeration performance & efficiency
Measures
- CO 0-10%
- O2 0-21%
- CO2 0-20%
- HC 0-5000ppm
- ACR pressure & temp
Calculates
- Lambda/AFR 0.8-1.2
- NOx 0-1500ppm optional
- ACR sub cool & superheat
Fuel Types
- Petrol / Gasoline
- LPG or CNG
- Diesel
- Most refrigerants
Order Information
| KANE-EGA4 | 4 Gas Exhaust Analyser with Kane Link, NDIR Infra-red & Electrochemical sensors, CO 0-10%, CO2 0-20%, HC 0-5000ppm & O2 0-21%. Calculates heat pump, A/C & refrigeration system superheat & subcool supplied with EP1 exhaust probe, CL5 USB Lead, CU12VDC2A21 charger, CA10733/4 12V Charger & 14102/2 large carry bag |
| EGA PROBES & ACCESSORIES | |
| EP1 | 350mm insertion depth stainless steel exhaust probe with 4M neoprene tubing – max temp 1250°C. Replaces EPAUTO1, 2, 3, 4 & 7 |
| EP2 | 300mm insertion depth stainless steel exhaust probe with 6M neoprene tubing & in-line 17702 70 micron particle filter – max temp 1250°C. Replaces EPAUTO5 & 9 |
| EP3 | 230mm insertion depth stainless steel motorcycle exhaust probe with 1.5M tubing – max temp 1250°C. Replaces EPAUTO8 |
| EP4 | As EP3 with thermocouple to measure exhaust temperature – max temp 1250°C. Replaces EPAUTO6 |
| EP5 | In-cab heater probe Replaces SM14053 |
| KANE-WPP22 x | 2 x Kane Link, pass through pressure probes for heat pump, A/C & refrigeration system pressure tests |
| KANE-WPP1 x | 2 x Kane Link, pass through pressure probes for heat pump, A/C & refrigeration system pressure tests |
| KANE-WPCP2 | 2 x Kane Link, wireless pipe clamp probes 0 to +80°C |
| KANE-WPCP | 1 x Kane Link, wireless pipe 1 x clamp probe 0 to +80°C |
| KANE-HUB4 KIT | 2 x KANE-WPCP & 2 KANE-WPP probes |
| 3407 | 4M black probe hose for EP1, 2 & EPAUTO5 & 9 |
| SM11533 | Reinforced rubber probe & brass fittings for EPAUTO1 |
| SM11103 | Black pressure hose connector for KANE-EGA1/2/3 |
| SM14980 | Red gas probe connector for KANE-EGA1/2/3 & new shape KANE-EGA4/5 |
| 17516 | RPM clamp for OIML analysers |
| MSC00117 | Protective pouch for KANE-EGA4/5 |
| 14102/2 | Large carry case |
| SM12516 | Hard plastic case for old shape KANE-EGA4/5, OIML & MID analysers |
| 20106 | Backpack |
| CU12VDCA21 | 100-240V charger for KANE AUTO4-1/5-1, OIML, MID & KANE-EGA4 & 5 |
| CA107334/4 | 100-240v charger for AUTO4-1/5-1, OIML, MID, old & new shape KANE-EGA4/5 |
| 19278 | Charger for KMIRP-2 Printer |
| USB1 | USB charger cable & UK plug for KANE-EGA1/2/3 & KANE-IRP3 from 2021 |
| CC13795-BLK | Protective black handset cover for AUTO4-1/5-1, OIML, MID & old shape EGA4/5 |
| CL3 | PC interface lead for AUTO4-1/5-1, OIML & MID analysers |
| CL5 | USB lead for new shape KANE-EGA4/5 |
| 18222 | Serial lead for AUTO4-1/5-1, OIML & MID analysers |
| SM11284 | Oil temperature probe for AUTO4-1/5-1, OIML, MID & KANE-EGA4/5 analysers |
| SM51061 | Hanging hook for new shape KANE-EGA4/5 |
| SM50932 | Boiler magnet for new shape KANE-EGA4/5 |
| CONSUMABLES | |
| 17702 | In-hose filter for EPAUTO3 |
| PF2/10 | 10 x PF2 particle filters for AUTO & EGA analysers |
| SM11529 | HC residue check filter for OIML & MID analysers |
| SM10464 | Watertrap for AUTO & old shape EGA4 & 5 analysers |
| SM50515 | Watertrap for KANE-EGA1/2/3 analysers |
| SM50675 | Watertrap for new shape KANE-EGA4/5 analysers |
| TP5 | 5 x Thermal Paper Rolls for KANE-IRP Printer |
| WN8 | Filter for AUTO4-3 & AUTO5-3 ANALYSERS |