Micronics U1000MKII FM Fixed Ultrasonic Clamp-on Flow Meter

The Micronics Ultraflo U1000MKII-FM is a Clamp-on, non-invasive Ultrasonic flow meter providing an alternative to a traditional in-line meter installation, plus dry servicing, for minimum downtime and maximum availability. Reduces installation and maintenance costs.

Features

• Electronic transmitter – LCD with backlight – install & service information
• Includes adjustable transducer guide rail and all mounting hardware
• Optional 4-20mA output. Resolution 0.1% of full scale. Maximum load 620Ω
• Optional Communication – Modbus or M-bus. Modbus connection cable is 1 m
• Cross-correlation flow measurement system
• 1Mhz transducers to get through poor/old thick wall pipes and larger pipework
• Water/Glycol option
• Simple to install: connect power and enter the pipe inside diameter, adjust the sensors and clamp on the pipe; no specialist skills or tools are required
• Integrated pulse output – aM&T & BEM’s compatible with Modbus

Technical Specification

• Turn Down Ratio: 100:1
• Accuracy: ±1% – 3% of flow reading for >0.3m/s (>1ft/s)
• Flow Velocity Range: 0.1m/s – 10m/s (0.3ft/s – 32ft/s)
• Pipe Range: Available in 2 options. 22mm – 115mm and 125mm – 180mm OD. Note Pipe size dependent on pipe material and internal diameter.
• Pipe Material: Steel, Stainless Steel, Plastic and Copper
• Water Temp Range: 0°C – 85°C (32°F – 185°F)
• Standard Outputs – pulse or frequency for flow, volume flow and alarms
• External Power Supply: 12V-24V ±10% AC/DC at 7 watts. Optional plug-in 12V power supply
• Electronics Enclosure: IP54
• Input/Output Cable: 5m x 6 core for power in, 4-20mA and pulse output
• Dimensions: 250mm x 48mm x 90mm [10″ x 2″ x 4″] {electronics + guide rail)

Order Information