Techne IFB-51 Industrial Fluidised Bath FIFB51D

Code: FIFB51D
  • Temperatures up to 600°C
  • No tool damage or abrasion in cleaning
  • 5-litre capacity
  • Safe, efficient and cost-effective

In Stock
Make An Enquiry

The Techne IFB-51 fluidised FIFB51D bath by Cole Parmer is a sand bath for heat treatment, cleaning, temperature calibrations, and reactive analysis (exothermic and endothermic reactions). The working diameter is 259mm with a depth of 305mm.

The sand bath will remove most polymers from tooling, including PVC, PET, PTFE, and PEEK without abrasion to the tool or mold. Parts immersed into the bath are cleaned by the high temperature (up to 600°C) environment within a bath media of fluidised aluminium oxide that instantly starts to degrade plastic to carbon, which then leaves the bath as CO2. Baskets are available for cleaning of small parts.

All baths require a dry air supply or an inert gas such as nitrogen and argon. Each unit comes with a front panel flowmeter to adjust airflow with settings for optimal flow per temperature. Note: When cleaning parts, baths should be operated in a hood or a well-ventilated area. Extraction collar and fans are available to ensure proper removal of fumes.

Suitable for cleaning of tooling, components, systems and parts (dies, breaker plates, nozzles, tools, tips, spinnerets, extruder screws, manifolds, etc.) The bath will remove almost all polymers, including plastic, paint, epoxy, rubber and adhesives, as well as other hydrocarbon-based products such as oils, fluids, grease, lubricants and coatings.

This instant heating and minimised quenching gives shorter cleaning times than with conventional ovens, and with the even and consistent heat of the bath, results in significantly reduced metal fatigue and tool damage.

Typical cleaning times range from 30 minutes to 2 hours depending on bath loading, temperature and amount of material to be cleaned.

Applications include tempering, annealing, nitriding, distillation, curing, exothermic and endothermic reactions, and thermal analysis of devices, components and materials.

  • Fast cleaning minimises production equipment down-time
  • Dry, inert, nontoxic aluminium oxide is a safer alternative than dangerous chemicals or solvents
  • Sand sold separately
Specifications 
Temperature range50°C to 600°C
Stability at 450°:C±1°C
Display resolution°C
Type of control3 term PID
Sensor typeK type thermocouple
Air pressure kPa (psi)170 to 1030 (25 to 150)
Air Consumption L:min at Ambient (max)115
Air Consumption L:min at 450°:C (max)48
Heat up time 20°:C to 450°:C105 minutes
Heat up time 20°:C to 600°:C150 minutes
Power consumption (kW)4
Net weight (Kg)60
Weight inc alundum (Kg)100
Overall size L x W x H (mm)521 x 521 x 686

Order Information

WZ-01184-10: FIFB51D Industrial Fluidised Bath (IFB) IFB-51 (230V) fluidised bath with flowmeter and temp controller, load capacity 5 litres (excludes collar, basket, lid and alundum)

Accessories

FA624  basket for use without collar
FA625 deep basket for use with the collar
F5915 filter/regulator
F6156  lid
F6157 extraction collar
BROWN/ALO Alundum, aluminium oxide fluidising medium, 25KG

Enquire About This Product

Additional information

Weight0.09 kg