Honeywell Series 3000 MKII & MKIII Gas Detector

Code: Series 3000
  • Cost Effective
  • Wide Range of Sensors
  • Non-intrusive configuration

In StockMake An Enquiry

Honeywell Analytics series 3000 MKII and MKIII Gas Detectors monitor Oxygen or Toxic gases continuously. The MKII is suitable for Zone 1, 2, 21 or 22 with an intrinsically safe sensor connection and flameproof housing. Using a remote mounting kit, the sensor can be placed in a Zone 0 area, up to 15 metres from the transmitter. The MKIII uses an IS barrier (purchase separately) providing suitability for Zone 0, 1, 2, 20, 21 or 22.

Sensors are pre-calibrated and plugin without wiring, swapping is possible without powering down the detector. Configuration is simple using menu/icons via the LCD. Maintenance is helped by fault diagnostic software and a programmable calibration period. Designed for low power consumption. All series 3000 models feature a loop-powered 4-20 mA connection, making them compatible with infrastructure old and new.

  • Suitable for Indoors or Outdoor use
  • Transmitter automatically recognises sensors
  • Long-life sensing elements
  • Integrated surface mounting lugs
  • Surecell electrochemical sensors
  • Approvals ATEX, IECEx UL & cUL
  • Ingress Protection IP66
  • Transmitter Housing options: Epoxy painted aluminium alloy LM25 or 316 Stainless Steel
  • Size 164mm x 201mm x 99mm weight Aluminium 1.7kg. Steel 3.7kg
  • Operating humidity continuous 20-90% RH (non-condensing)
  • Operating pressure 90-110kPa

Options

  • Remote sensor
  • Duct mounting H2, CO and H2S only
  • Pipe mounting kits horizontal or vertical
  • Calibration cup to apply test gas
  • Collecting cone

Enquire About This Product

Title Size
Series 3000 MkII MkII 1 MB
Series 3000 MKII_Manual 4 MB
Series 3000 MKIII Manual 5 MB

Ordering Information

Series 3000 MkII transmitter (flameproof) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or 2 x M20
conduit/cable entries (certification dependent), 1 x suitable blanking plug, 1 x hex wrench set, weatherproof cap, operating
magnet, calibration and test certificate and instruction manual. Gas specific Sensor and accessories to be ordered separately.

ATEX/IECEx Approved

S3KAL2 ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries
S3KAS2 ATEX/IECEx approved Series 3000 MkII toxic and oxygen transmitter, Stainless Steel 316and 2 x M20 entries

UL/c-UL Approved

S3KUL2 UL/cUL approved Series 3000 MkII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries
S3KUS2 UL/cUL approved Series 3000 MkII toxic and oxygen transmitter, Stainless Steel 316 and 2 x 3/4”NPT entries

Series 3000 MkIII transmitter (Intrinsically Safe) is supplied complete with integral surface mounting lugs, 2 x 3/4”NPT or 2 x M20
conduit/cable entries (certification dependent), 1 x suitable blanking plug, 1 x hex wrench set, weatherproof cap, operating
magnet, calibration and test certificate and instruction manual. Gas specific Sensor and accessories to be ordered separately.

ATEX/IECEx Approved

S3KAL3 ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x M20 entries
S3KAS3 ATEX/IECEx approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x M20 entries

UL/c-UL Approved

S3KUL3 UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Aluminium LM25 and 2 x 3/4”NPT entries
S3KUS3 UL/cUL approved Series 3000 MkIII toxic and oxygen transmitter, Stainless Steel 316 and 2 x 3/4”NPT entries

Serviceable Sensor (316 Stainless Steel)

S3KXSO1SS Oxygen 0-25%v/v £220.00 UB
S3KXSC1SS Carbon Monoxide 0-300ppm (100 to 500ppm, 100ppm)
S3KXSC2SS Carbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KXSH1SS Hydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KXSH2SS Hydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KXSL1SS Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSS1SS Sulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KXSX1SS Chlorine Dioxide 0-1.00ppm
S3KXSM1SS Nitrogen Monoxide 0-100ppm
S3KXSN1SS Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KXSG1SS Hydrogen 0-1000ppm
S3KXSG2SS Hydrogen 0-10,000ppm
S3KXSR1SS Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KXSY1SS Hydrogen Cyanide 0-30.0ppm
S3KXSF1SS Hydrogen Fluoride 0-12.0ppm (Fixed Scale)
S3KXSA1SS Ammonia 0-200ppm (50 to 200ppm, 50ppm)
S3KXSA2SS Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KXSP1SS Phosphine (PH3) 0-1.2ppm (Fixed Scale)
S3KXSU1SS Fluorine 4ppm
S3KXSE1SS Ethylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)

Accessories, Consumables and Spares

SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets)
SPXCDSDP Sunshade / Deluge Protection
S3KCAL Calibration cup (flow adapter) for Series 3000 and XNX EC toxic sensors
S3KCC Collecting cone (for Series 3000 & XNX EC toxic sensors)
S3KDMK Duct mounting kit for Series 3000 and XNX EC toxic sensors
S3KRMK Remote mounting kit for Series 3000 and XNX EC toxic sensors inc sensor connection unit fitted with 15m cable and connection plug for tx
S3KRMK45 Remote mounting kit for Series 3000 and XNX EC toxic sensors inc sensor connection unit fitted with 45m cable and connection plug for tx
S3KRMK75 Remote mounting kit for Series 3000 and XNX EC toxic sensors inc sensor connection unit fitted with 75m cable and connection plug for tx
SGPTPRMTL1 Single channel zener barrier MTL7728+
SGPTPRMTL2 2 channel zener barrier MTL7787+
SGPTPRMTL3 Galvanic Isolator MTL 5042
SGPTPRPFG1 Galvanic Isolator P&F KFD2-STC4-EX1
90068-A-8204 Gassing Block 316SST. 6mm O/D Connector to Sensor and 6mm Tube Connector to Gas Bottle
90068-C-8290 PTFE Tubing 6mm O/D x 4mm I/D.
90068-C-8291 PTFE Tubing 8mm O/D x 6mm I/D.
90068-C-8292 Soft PVC Tubing 8mm O/D x 5mm I/D.
ADU300429 Adaptor, ATEX, Ex d e, 316SS, M20 (male) to 1/2″NPT (female)
RDU303029 Reducer, ATEX, Ex d e, 316SS, 3/4″NPT (male) to 1/2″NPT (female)

Cell Exchange Kits

S3KO1SS Oxygen 0-25%v/v
S3KC1SS Carbon Monoxide 0-300ppm (100 to 999ppm, 100ppm)
S3KH1SS Hydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm)
S3KH2SS Hydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm)
S3KL1SS Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KS1SS Sulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm)
S3KX1SS Chlorine Dioxide 0-1.00ppm
S3KM1SS Nitrogen Monoxide 0-100ppm
S3KN1SS Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm)
S3KG1SS Hydrogen 0-1000ppm
S3KG2SS Hydrogen 0-10,000ppm
S3KY1SS Hydrogen Cyanide 0-30.0ppm
S3KF1SS Hydrogen Fluoride 0-12.0ppm (Fixed Scale)
S3KR1SS Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm)
S3KA1SS Ammonia 0-200ppm (50 to 200ppm, 50ppm)
S3KA2SS Ammonia 0-1000ppm (200 to 1000ppm, 50ppm)
S3KP1SS Phosphine (PH3), 1.2ppm (Fixed Scale)
S3KU1SS Fluorine 4ppm
S3KE1SS Ethylene Oxide (ETO), 25.0ppm (20.0 to 50.0ppm)
S3KDM Replacement display module
S3KTM Replacement terminal module
S3KDM3 Mk III Replacement display module
S3KTM3 Mk III Replacement terminal module
S3KWP Weatherproof housing with bump test port for use with Series 3000 and XNX EC toxic sensors
SPXCDMAG Magnet
SPXCDHWES Hex wrench for earth screw
SPXCDEBS Earth Bracket and Screws
S3KM20P M20 Blanking Plug
S3KNPTP 3/4″NPT Blanking Plug

Enquire About This Product