BW Gas Alert Micro Clip X3

Code: GasAlertMicroClip X3
  • Up To Four Gases
  • 3 Year Warranty
  • Reliable

In Stock
Make An Enquiry

BW Gas Alert Micro Clip X3 Gas Detector by Honeywell can detect Flammable, Oxygen, Carbon Monoxide and Hydrogen Sulphide. With three, two or single gas models available. Life expectancy is five years, with the new BW Technologies O2 sensor not needing to be replaced, reducing maintenance and overall cost of ownership. IP68 ingress protection allows deployment in extreme environments, protecting against dust and water. The detector can be submerged for 45 minutes at a depth of 1.2 metres.

The GasAlert MicroClip X3 Gas Detector is easy to use, operated by a single button, aided with icons.  Real-time gas concentrations are displayed on the LCD, combustible gas can be viewed in LEL or % volume.  An IntelliFlash gives visual compliance producing a green flashing light, the frequency can be operator adjusted. An audible beep can be initiated when in use. Settings can be programmed to force user calibration or bump test. Auto zeroing can be set to run on startup, along with custom message displayed.

  • Alarms: Visual, vibrating, audible (95 dB)- Low, High, STEL, TWA, OL (over limit)
  • Operational time at least twelve hours constantly down to-20°C
  • Continuous health check of sensors, battery status, circuit integrity. Audible & visual alarms on startup
  • Per ACGIH 1 ppm H2S TWA recommendations
  • Size 11.3 x 6.0 x 3.1 cm, weight 190g
  • Languages supported: English, French, German, Spanish and Portuguese

Options

  • Compatible with IntelliDoX Automated Test System with Fleet Manager II software for bump tests & calibration. Also with MicroDock II
  • Can be used with Honeywell BW Connect, an additional adaptor that allows wireless monitoring by pairing with a mobile device by Bluetooth
  • IR connectivity kit with Fleet Manager II software (for data download & set up)
  • Five unit charger with or without cradle available
  • Manual Aspirator for confined space use or kit version option

Each X3 is supplied with a stainless steel alligator clip for donning, concussion-proof surround, rechargeable lithium-polymer battery, charging adaptor, calibration-test cap with hose and manual.

Enquire About This Product

Title Size
Honeywell BW MicroClip Series Datasheet 1 MB
gasalertmicroclipxlspecs 416 KB
GasAlertMicroClip User Manual 2 MB
BW Connect Datasheet 1 MB
BW Gas Alert Micro Clip Service Guidance 126 KB
GasAlertMicroclip XL,X3 ATEX Certificate 319 KB

Additional information

Weight0.190 kg

Ordering Information

GasAlert MicroClip X3, Gas Key W = %LEL Combustible, X = O2 Oxygen, H = H2S Hydrogen Sulfide & M = CO Carbon Monoxide.

For none EU countries change end characters, UK United Kingdom, NA North America and RU Russia.

Code: MCX3-WEXT-1Y: One-year extension of warranty is available at the time of purchase

Colours: Y in part number indicates Yellow – first listing and B in part number denotes Black – second listing.

Filtered LEL versions

Four Gas

MCX3-XWHM-Y-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-XWHM-B-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)

Three Gas

MCX3-XWH0-Y-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-XWH0-B-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-XW0M-Y-EU Combustible (%LEL), Oxygen (O2), Carbon Monoxide (CO)
MCX3-XW0M-B-EU Combustible (%LEL), Oxygen (O2), Carbon Monoxide (CO)
MCX3-0WHM-Y-EU Combustible (%LEL), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-0WHM-B-EU Combustible (%LEL), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-X0HM-Y-EU Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-X0HM-B-EU Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)

Two Gas

MCX3-XW00-Y-EU Combustible (%LEL), Oxygen (O2)
MCX3-XW00-B-EU Combustible (%LEL), Oxygen (O2)
MCX3-0WH0-Y-EU Combustible (%LEL), Hydrogen Sulphide (H2S)
MCX3-0WH0-B-EU Combustible (%LEL), Hydrogen Sulphide (H2S)
MCX3-0W0M-Y-EU Combustible (%LEL), Carbon Monoxide (CO)
MCX3-0W0M-B-EU Combustible (%LEL), Carbon Monoxide (CO)
MCX3-00HM-Y-EU Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-00HM-B-EU Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-X0H0-Y-EU Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-X0H0-B-EU Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-X00M-Y-EU Oxygen (O2), Carbon Monoxide (CO)
MCX3-X00M-B-EU Oxygen (O2), Carbon Monoxide (CO)

Single Gas

MCX3-0W00-Y-EU Combustible (%LEL)
MCX3-0W00-B-EU Combustible (%LEL)
MCX3-X000-Y-EU Oxygen (O2)
MCX3-X000-B-EU Oxygen (O2)
MCX3-00H0-Y-EU Hydrogen Sulphide (H2S)
MCX3-00H0-B-EU Hydrogen Sulphide (H2S)
MCX3-000M-Y-EU Carbon monoxide (CO)
MCX3-000M-B-EU Carbon monoxide (CO)

Non-Filtered LEL versions

Four Gas

MCX3-XUHM-Y-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-XUHM-B-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)

Three Gas

MCX3-XUH0-Y-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-XUH0-B-EU Combustible (%LEL), Oxygen (O2), Hydrogen Sulphide (H2S)
MCX3-XU0M-Y-EU Combustible (%LEL), Oxygen (O2), Carbon Monoxide (CO)
MCX3-XU0M-B-EU Combustible (%LEL), Oxygen (O2), Carbon Monoxide (CO)
MCX3-0UHM-Y-EU Combustible (%LEL), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)
MCX3-0UHM-B-EU Combustible (%LEL), Hydrogen Sulphide (H2S), Carbon Monoxide (CO)

Two Gas

MCX3-XU00-Y-EU Combustible (%LEL), Oxygen (O2)
MCX3-XU00-B-EU Combustible (%LEL), Oxygen (O2)
MCX3-0UH0-Y-EU Combustible (%LEL), Hydrogen Sulphide (H2S)
MCX3-0UH0-B-EU Combustible (%LEL), Hydrogen Sulphide (H2S)
MCX3-0U0M-Y-EU Combustible (%LEL), Carbon Monoxide (CO)
MCX3-0U0M-B-EU Combustible (%LEL), Carbon Monoxide (CO)

Single Gas

MCX3-0U00-Y-EU Combustible (%LEL)
MCX3-0U00-B-EU Combustible (%LEL)

Accessories

Sampling & Testing Equipment

MC-CK-DL Confined Space Kit GasAlert MicroClip XL and X3
GasAlertMicroClip X3 deluxe confined space kit – includes a manual aspirator
kit, IR connectivity kit with Fleet Manager II software, calibration cap with
1 ft. / 0.3 m hose, 0.5 LPM regulator, sampling probe, leather carrying case,
auxiliary filter and carrying case with foam insert. Detector and calibration gas sold separately.

MC-AS01 Manual Aspirator Pump Kit with probe (1 ft./0.3 m)
MC-TC-1 Test cap and hose (1 ft/0.3 m) replacement

Carrying and Protective Accessories

GA-NS-1 Neck strap with safety release
GA-LY-1 Short strap (6 in./15.2 cm)
GA-ES-1 Extension strap (4 ft./1.2 m)
GA-CH-2 Chest harness
MC2-LC-1 Black leather and PVC carrying holster GasAlert MicroClip XL and X3
MC-AF-K1 Auxiliary Filter Kit (complete with filter adaptor and 5 filters)
MC-AF-1 Auxiliary Filter Adaptor (no filter)
MC-SS-AF-K1 Auxiliary Filter Filter replacement for adaptor (kit of 10)

Power Supplies and Spares

MC2-C01-MC5 Multi-unit (5) cradle charger
GA-PA-1-MC5-EU Multi-unit (5) wall outlet power adaptor
GA-VPA-1 Vehicle 12-24VDC power adaptor with plug
GA-PA-3 Vehicle 12-24VDC direct-wire power adaptor
GA-PA-1-EU Replacement wall outlet power adaptor

Datalogging Accessories

GA-USB1-IR: IR connectivity kit with Fleet Manager II software

Honeywell BW Connect BLE Adapter and Field Communicator Device

Field Communicator (FC) is an Android-based mobile application and phone that enables real-time communication
between a worker’s instruments and a remote monitoring system. The phone and the application act as a
personal communication hub for a worker, which collects instrument readings and alarms from instruments over
Bluetooth (BLE) or Wi-Fi and transmits in real-time to a remote system over a 3G/4G/LTE communication network.
The application also transmits a worker’s information and location to the remote system, which allows safety
managers to quickly react and provide necessary assistance in case of an emergency. This solution not only provides
real-time visibility of worker safety, but it also improves productivity with real-time access to remote information and
collaboration with peers.
Note 1: Please note that the Safety Communicator app is NOT pre-loaded onto the Field Communicator
Note 2: A ProRAE Guardian license is needed to connect to Systems’ Real-Time Monitoring

Honeywell BW Connect BLE adapter BW-CONNECT
029-5402-200 Rugged Field Communicator (EU/UK)
029-5401-200 Zone 1 (IS) Field Communicator (EU/UK)
029-5401-200-WC Zone 1 (IS) Field Communicator (EU/UK) Without Camera
029-5401-200-WCS Zone 1 (IS) Field Communicator (EU/UK), Without Camera and SIM
029-5403-000 Multi-Region Field Communicator Charger (US/EU/UK)
029-5410-000 USB Lead with IS Barrier for use with 029-5401-200/-WC/-WCS
S01-1000-210 ProRAE Guardian Real-time Monitoring Tier 1 Yearly Subscription per Instrument

Replacement Sensors and Sensor Screens

MC2-SS Replacement quad sensor screen filter for GasAlertMicroClip XL/X3 (kit of 2)
MC2-SS-K1 Replacement quad sensor screen filter for GasAlertMicroClip XL/X3 (kit of 10)
SR-W-MP75C Replacement MICROpeL combustible (LEL) sensor, filtered
SR-W-MP75 Replacement MICROpeL combustible (LEL) sensor, unfiltered
SR-X3P Replacement oxygen (O2) sensor 3 year
SR-H-MC Replacement MICROceL hydrogen sulfide (H2S) sensor
SR-M-MC Replacement MICROceL carbon monoxide (CO) sensor
SR-W-MC-DUM Dummy sensor for combustible (LEL) sensor location
SR-DUMM1 Dummy sensor for the oxygen sensor location
SR-TOX-MC-DUM Dummy sensor for toxic sensor locations

Service Parts

MC-LCD-K1 Replacement LCD kit for GasAlertMicroClip X3
MCX3-FC1 Replacement front enclosure (yellow) for GasAlertMicroClip X3 with 6 screws
MCX3-FC1B Replacement front enclosure (black) for GasAlertMicroClip X3 with 6 screws
MCX3-MPCB1 Replacement main PCB with battery and screws D Level-2
MCX3-BC1 Replacement back enclosure (yellow) with screws and alligator clip
MCX3-BC1B Replacement back enclosure (black) with screws and alligator clip
MC-SCREW-K1 Replacement screws (kit of 20) – PCB Screws (one type)
MCX3-FPCB1 Oxygen (O2) sensor PCB including flex cable K Level-1
GA-VM-2 Replacement vibration motor Level-1

Enquire About This Product