Kane 905 Commercial Flue Gas Analyser

Code: KM905
  • Discontinued
  • Combustion analyser suitable for Industrial boilers
  • Multi-Gas, choose additional sensors

In StockMake An Enquiry

Kane 905 Commercial Flue Gas Analyser

Now obsolete replacement for industrial applications is the 958 or 988, alternatively for domestic and light industrial applications, the 458s.

Designed for gas engineers to use on commercial and domestic oil, gas and biomass flue gas applications. Suitable for boiler installation, commissioning or servicing. The Kane 905 is supplied with a Hydrogen compensated Carbon Monoxide sensor 0-4000ppm and an Oxygen sensor 0-21%, with options to add two additional sensors. A high-range CO sensor 0-10% can replace the standard CO sensor. Differential Pressure and Temperature (inlet, flue gas, differential) are also measured. Ambient monitoring allows the capability to detect CO leakage.

The standard probe is rated at 650°C, and temperatures up to 1200°C can be accommodated using an optional high-temperature probe.

A wireless upgrade enables data transmission to a PC using Kane Live software. Send printout data to a mobile device by downloading the free Kane wireless printer app.

If serviced annually, the warranty extends to six years.

Calculated values

  • CO2
  • CO/CO2 ratio
  • Excess air
  • Combustion efficiency
  • NOx (calculated with just NO sensor fitted) -Absolute measurement with NO and NO2 sensors installed

Sensor Options: (up to 2 other)

  • CO 0-100,000ppm
  • NO 0-100ppm
  • NO 0-5000ppm
  • NO2 0-1000ppm
  • SO2 0-100ppm
  • SO2 0-5,000ppm

Further Options

  • BTM/450 Wireless Android module
  • BTM 450LE Wireless iOS module
  • IRP-2 Infra-Red Printer (wireless)

Standard Fuel Types Selectable:

  • Natural Gas
  • Butane
  • Propane
  • LPG
  • 28-sec oil
  • 35-sec oil
  • Heavy oil
  • Solid fuel
  • User fuel
  • *Further types can be added by inputting calorific values

Features

  • Stores 150 sets of test results
  • Handset 220mm x 55mm x 120mm, weight 1kg
  • Probe length 240mm x diameter 8mm with 285mm long stainless steel shaft. Type K thermocouple supplied with 1.5m long neoprene hose

Supplied with all the following: KM905 flue gas analyser with infrared output to optional printer, KMCP10 flue measuring gas probe, protective rubber sleeve, long-life battery, charger, Kane May calibration test report and product manual.

Enquire About This Product

Title Size
Kane 905 Datasheet 306 KB
Kane 905 Manual 711 KB

Additional information

Weight 10 kg